MONSTER DNA MAX Speaker User Guide
- June 3, 2024
- Monster
Table of Contents
MONSTER DNA MAX Speaker
Monster DNA MAX
Speaker Function Operation
Power Button
- Press once: answer call/end call/play/pause
- Press and hold for 2s: power on/off/call reject
Volume + / Next Track:
- Press once: volume up
- Press and hold for 2s: next track
Volume – / Previous Track: Press once:
- volume down
- Press and hold for 2s: previous track
Monster Share™, Party Mode: Press and hold 2s to set transmitting speaker
- Press once to set receiving speakers
- Connect up to 99 Monster DNA Speakers
Bluetooth Pairing Button:
- Press and hold for 2s : Bluetooth pairing
- Charging Port( USB-C™ )
Battery Level Indication
- Press and hold”-” and”+” buttons for ls for battery level indication
Function
Pairing -First time:
- Press and hold the Power button around 2s to turn on the speaker.
- When turning the speaker on for the first time, it will automatically be in pairing mode. The LED Ring will flash Blue in a clockwise motion.
- Activate your Bluetooth device and search for “Monster DNA MAX” speaker.
- Once the speaker is connected successfully, the· LED Ring lights up blue for 3s, then turns off.
Pairing -Manually
- After power is on, the speaker will attempt to connect to the last connected device.
- To pair another device, press and hold the Bluetooth Pairing Button for 2s. The LED Ring will flash Blue in a clockwise motion.
- Activate your Bluetooth device and search for “Monster DNA MAX” speaker.
- Short press Bluetooth Pairing button again to disconnect.
Bluetooth Mode
- Press once: Volume+/- button for volume up/down
- Press and hold for 2s: Volume+/- button for next/previous track
- Press once: Power button to start music play/pause
- Press once: Power button to answer an incoming call or ending a call
- Press and hold for 2s: Power button to reject an incoming call
USS/Wireless Charging
- To charge the speaker by USB-C, connect the included USB-C cable and plug it into a USB power source (such as the USB-C wall adapter provided). For wireless charging, connect the Wireless Charging Base to the wall adaptor and place the speaker directly on it.
- The LED Ring light will ‘breathe’ with a white glow while charging.
- Once fully charged, the LED Ring will show a white light for 5s, then turn off.
Charging Out
- Connect your device(such as a smartphone) to the speaker’s Charging Port and charging will start automatically.
Monster ShareTM, Party Mode:
-
Turn on all Monster DNA speakers you would like to connect by pressing and holding the Power button for 2s.
-
Connect to one of the Monster DNA speakers by Bluetooth, and press and hold the ‘Monster ShareTM Party Mode’ button for 2s to set this as the main transmitting speaker. A flashing purple light will appear indicating Party Mode transmission is in pairing mode.
-
Single press the ‘Monster Share TM Party Mode’ button on all other speakers that you would like to set as receiving speakers. A green ight will flash in a circle while pairing and will turn solid Green once paired.
-
If speakers are not paired within 30s, Monster ShareTM Party
Mode’ pairing will time out. Restart this process to connect additional speakers. -
Press the “Monster SharetM Party Mode’ button once again to exit Party Mode. Monster ShareM Party Mode works with compatible Monster Speakers enabled with Monster Share TM technology Auto Power Off:
The speaker will turn off automatically in 15 minutes if no connection was found or idling.
This Bluetooth device shall be charged by the supplied charging unit only.
Cautlon: The batteries in this product are not replaceable. During use,
storage or transportat!on the battery should not be subjected to extremely low
temperatures, or low air pressure at high altitude. If the battery .is exposed
to extremely high temperatures It could result In an explosion or the leaking
of flammable Uquid or gas. Please take care when disposing of the unit;
disposal in a fire, oven, mechanically crushing or cutting machine could cause
an explosion.
Warning: Do not dispose of the unit in fire or water. Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycling advice. Keep your device and all accessories out of the reach of children and animals. Small parts may cause choking or serious
Injury If swallowed. Avoid exposing your device to, very cold or very hot temperatures ( Below o0 or above 45° C). Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet, liquids . can cause serious damage. Do not handle your device with wet hands.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.,
This device complies with part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) This device may not cause harmful Interference, and (2) this device must accept any interference received, Including Interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur In a particular installation. If this equipment does cause harmfu,l Interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the Interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver Is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating In conjunction with any other antenna or
transmitter.
Product Specs
- IP67-Rating: waterproof speaker, dust-proof, floats in water
- Power: up to 20 hours of battery life
- Charge time: 5 hours 5V/2A
- Music share from speaker to multiple speakers. No application required. Mobile range of play is up to 45 m (150 ft). THD s 1%
- Battery: 7.4v/5000mah(l8650type)
- Output charge: 5V/2.4A
- Wireless Qi charging coil
- USS Type-C™ charging port
For French, Spanish and Portuguese
instructions scan here:
www.monsterforever.com
Package Includes
- Wireless Speaker, “(1) Qi Charger (not IP67)
- USB Cable, User Manual.
Warranty: Limited Lifetime Warranty
See more at monsterforever.com
2022 The M Monster logo, Pure Monster, V-Sound and Because The Music Matters
are trademarks or registered trademarks that are used under license of
Monster, Inc.
2022 All rights reserved. USB Type-A”, USB Type-C and USB-CH are trademarks of
UsB Implementers Forum. Manufactured, marketed and distributed by Lifeworks
Technology Group LLC. under license. New York, NY 10018. All other emarks are
property of their respective owners.
website: www.monsterforever.com
support: support@monsterforever.com
California Proposition 65 Warning:
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Made in China –
Model: 2MNBDI116
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>