sauermann KH120 Class 120 Kistock Data Loggers User Guide
- June 5, 2024
- sauermann
Table of Contents
sauermann KH120 Class 120 Kistock Data Loggers
Quick start guide
Operating temperature, protection of the instruments and information about storage and the battery
- Operating temperature*: KT120: from -40 to +70 °C; KH120: from -20 to +70 °C
- KT120: IP65; KH120: IP20
- Storage temperature: from -40 to +85 °C
Battery power supply: 1 x CR2450 (button battery*)
Display
- DATASET is finished.
- Indicates that one value is being recorded. It flashes: the DATASET did not start already.
- Flashing slowly: DATASET is between 80 and 90% of the storage capacity. Flashing quickly: DATASET is between 90 and 100% of the storage capacity.
- Constant: storage capacity full.
- The displayed values are the recorded maximum/minimum values for the displayed channels.
- Indicates the alarm action
- type: rising or falling action.
- Constant: indicates that the batteries have to be replaced.
- Indicates the channel number which is measured.
°C: Temperature in °Celsius
°F: Temperature in °Fahrenheit%RH: Relative humidity (KH 120).
Dimensions (mm)
The battery must be in compliance with the IEC 60086-4 standard.
Connections
PC connection input
5 Recorder function
The KISTOCK allows to record the values measured instantaneously, it records
the values according to a predefined interval. On the other hand, it is
possible to operate continuously the KISTOCK thanks to a loop recording.
3Types of dataset start
The measurement dataset can be launched:
- With a delayed start (with a predefined date and time)
- With the software
- With push-button
6 types of datasets stop
You can stop your dataset:
- According to a date and time (if it was started the same way)
- According to a recording duration
- According to a predefined number of recording points
- If the storage capacity of the memory is full
- With “Stop” option of the software
- By holding “OK” key during about 5 seconds, if this function has been previously activated by the software.
Mounting
The STOCK data loggers have a magnetic mounting, so you can fix it easily.
- Magnetic mounting
- Battery cover
- Locking sign of the battery cover
Replace the battery
With 500 days to 3 years* of battery life, KISTOCK devices guarantee long-term measurements. To replace the battery:
- Unlock the battery cover.
- Insert the battery (CR 2450 button battery**) with the + pole visible.
- Replace the battery cover with the indicator in front of the opened padlock and close it by turning it towards the right in order to make correspond the indicator with the closed padlock.
Accessories
Please refer to the datasheet to get more information about available
accessories.
Maintenance: please avoid any aggressive solvent. Please protect the
device from any cleaning product containing formalin, that may be used for
cleaning rooms or ducts.
Precautions for use: please always use the de-vice in accordance with its
intended use and within parameters described in the technical features in
order not to compromise the protection ensured by the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>