TARGETTI ISO Suspended Light User Guide
- June 3, 2024
- TARGETTI
Table of Contents
TARGETTI ISO Suspended Light
GENERAL INFO
Stand-alone linear LED fixture for suspension installation. 2144x70x73mm
LED
LED Engine made of linear boards
From 3300 to 7129lm 2700K – 3000K – 3500K – 4000K Ra90
PRODUCT
EFFICACY
Up to 121lm/W
OPTICS
Diffused light with an opal screen – Highly reflective brushed aluminum
reflector and an opaline polycarbonate screen. Controlled light UGR<19
(EN-12464) – Optical system composed of a highly reflective brushed aluminum
reflector and a transparent polycarbonate screen coupled with a micro
prismatic plate and a spreader lens.
POWER SUPPLY
Electronic – DALI Casaba control system available using a dedicated accessory
(only for DALI version products).
MATERIAL
Painted extruded aluminum body and a painted aluminum optical unit and
terminal. Opaline polycarbonate or UGR screen.
ON DEMAND
Easy Custom Color
110-277Vac
power supply
ISO
Suspension fixture for office and hospitality environments designed in close
collaboration with the American firm Gensler. Available with direct or
direct/indirect emission with two different effects: diffused light and
controlled light UGR<19 (EN-12464) L65<3000 cd/m².
L=840mm central indirect lighting.
Also available in a version for ceiling installation.
Indoor
Ceiling, Suspensions and Wall
Plus
Design
The union between the interpenetration of two solids produce a fixture with a
recognizable yet discrete design, perfect to characterize modern spaces
Two optical systems
The two different optical systems it can use – OPAL and UGR – make it suitable
for installation in OFFICE applications which are increasingly becoming open
spaces, and in Hospitality projects which require not only visual comfort, but
also attention to design and detail.
UGR <19 optic
The UGR version is focused entirely on visual comfort. The color rendering
index of CRI 90 and the perfect UGR screening allows for a pleasant and
measured light.
The sophisticated optical system, comprised of a mirrored reflector and a
particular prismatic
screen, reduces the shadows
and reflections that can cause disturbance on work surfaces, allowing for an
unrestricted distribution of desks without having to bear in mind the position
of the lighting units.
Opal optic
The diffused effect of ISO OPAL is the result of a mirrored reflector with an
opal screen. The light emitted appears soft and widespread, particularly
suitable for reception areas in offices, hotels and spaces. In the
direct/indirect light version, a line of light is present on the upper part,
complete with diffusing screen to provide even light on the ceiling.
Suspension L. 2144mm
LED / 35W / DOWN OPAL
Driver | Color | 2700K | 3000K | 3500K | 4000K |
---|---|---|---|---|---|
EL. | 1T7179EL | 1T7180EL | 1T7181EL | 1T7182EL | |
DALI | 1T7179DA | 1T7180DA | 1T7181DA | 1T7182DA |
LED / 16W / DOWN UGR
LED / 54W / UP-DOWN OPAL
Driver | Color | 2700K | 3000K | 3500K | 4000K |
---|---|---|---|---|---|
EL. | 1T7183EL | 1T7184EL | 1T7191EL | 1T7192EL | |
DALI | 1T7183DA | 1T7184DA | 1T7191DA | 1T7192DA |
LED / 36W / UP-DOWN UGR
Note
Power supply kit and suspension kit L=4000mm supplied with the product.
Accessories
Control systems
- Code
- 1T5349
Wireless control unit for DALI fixtures. It generates a local DALI bus that can
control individual fixtures. The module can be connected to an existing DALI
network. The module is wireless controlled using a Casaba app for smartphones
and tablets using Bluetooth 4.0 technology. The devices create a wireless mesh
network that can control up to 128 fixtures. IP20.
LxHxP=56.5×22.3×35.8mm.
- Code
- 1T5352
IP20 Extender for wireless control of DALI fixtures. It generates a local DALI
bus with the capacity to drive up to 64 fixtures. Can control DALI fixtures in
indoor applications via the Casaba application. It is also equipped with a
relay that can control non-dimmable fixtures up to a maximum of 6A.
LxHxP=129x30x42mm.
Requisites and information
All fixtures of the Targetti collection have been designed and produced to comply with European Standard EN60598-1 relative to the safety requisite of light fixtures.
DIRECTIVES EUROPEAN COUNCIL
All fixtures comply with the following directives:
- → EMC Directive 2014/30/EU
- → LV Directive 2014/35/EU
- → RoHS Directive 2011/65/EU
Unless specified otherwise
- → all fixtures are supplied without lamps;
- → all fixtures are sold separately;
- → all measurements are expressed in millimeters;
- → all fixtures at low voltage are supplied without transformer;
- → For products in Class III performance is only guaranteed using the electronic power supplies and drivers indicated in the catalogue.
Consortia Eco light
Targetti Sankey Spa is a member of the Ecolight consortium that was set up in
2004 (D.Lgs. 49/2014) to comply with the provisions of the European Directive
that was adopted in Italy as the European Directive 2012/19/EU for WEEE on
managing, recovering and treating waste electrical and electronic equipment,
used batteries and accumulators in compliance with all applicable legislation.
The colors of the products illustrated are reproduced as faithfully as
possible compatibly with the technical limitations of the printed medium. The
company reserves the right to make changes to the production without notice.
Reproduction of this catalogue or any part of it is prohibited. The products
illustrated in this catalogue are covered by one or more Italian or
international patents. The company will take legal action against any
imitators.
TARGETTI SANKEY SpA Certificated ISO 9001 n° 9130. TAR1
The Enec mark, awarding of the ISO9001 certificate and the CE brand all
guarantee that the activities carried out internally in the company are
governed and controlled by procedures which assure constant level of quality.
Accredited laboratory in accordance with ISO 17025.
Light beam apertures
from| to| beam|
---|---|---|---
5°| 10°| Narrow Spot| NSP
11°| 25°| Spot| SP
26°| 40°| Flood| FL
41°| 50°| Medium Wide Flood| MWFL
51°| 70°| Wide Flood| WFL
71°| 120°| Very Wide Flood| VWFL
| | Wall Washer| WW
| | Narrow Asymmetric| N. ASYM
| | Asymmetric| ASYM
Icons legend
- Class I luminaire in which the protection against electrical shock is guaranteed by the connections of the conductive elements accessible to a protective conductor (earth connection).
- Luminaire in which the connection to a protective conductor (earth connection) guarantees the immunity to radio noises.
- Class II luminaire (double insulation), protected against the accidental contact with parts under tension from the user.
- Class III luminaire, suitable for connection to very low voltage circuits.
- Solid particle and liquid ingress protection degree.
- Protection degree – Recessed part . Protection degree – Exposed part.
- Impact protection degree.
- ENEC European Norms Electrical Certification.
Particular symbols
- Weight of the single fixture.
- Cable length.
- Walk-over.
- Driver-over safe.
- Fixtures that have parameters below the minimum visibility threshold PstLM=1 and SVM≤0.4 (IEC TR 61547-1 and IEC TR 63158).
- DBS Dynamic Beam Shaper optical technology with remote management of the beam opening.
- LED with Ra__ where not present in the catalogue, available on request.
- Different color temperatures available on request.
- Custom finish of your choice from the Targett Colors range and RAL indicated in the color chart can be downloaded on line from the download section.
- Treatment carried out on request.
- Supplied on request with an integrated or remote 110-277Vac power supply as indicated for the standard model.
- LED version with a different “Tunable White” tone available on request.
Note
- → Please contact us for on demand treatments and versions.
- → The performances reported on the products refer to the use of the recommended drivers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>