OPTOKON QUICK-CURE Installable Connectors User Guide
- October 30, 2023
- OPTOKON
Table of Contents
OPTOKON QUICK-CURE Installable Connectors
Description
QUICK-CURETM introduces a new type of optical connector for use in field conditions. The pre polished connector (SC, LC type) is designed for optical fiber termination especially in FTTH projects, directly in the end user site. Using the tool kit containing all necessary tools, it allows easy optical network installation. Termination with no epoxy, no heating, no polishing and no splicing achieves similar excellent transmission parameters as standard polishing and splicing technology. Connector set for various fiber and cable diameter is available. QUICK-CURETM helps you save time when working in the field.
Features
- FTTH project usable
- Field installable, quick assembly time
- Cost effective, User friendly
- No electricity required No epoxy and polishing required;
- Precision mechanical alignment insures low insertion loss;
- Users proven, molded v-groove technologies;
Specifications
PARAMETER
Fiber type| Single mode, G.652D & G.657A1 (typical/maximal)
Insertion Loss1| 0.3 dB / 0.50 dB
Return Loss2| ≥ 45 dB (UPC) / ≥ 60 dB (APC)
Polishing type| UPC / APC
Reusable| ≥ 5 times
Fastening strength of bare fiber| ≥ 5 N
Tensile strength| ≥ 50 N
On-line tensile strength (20 N)
ΔIL ≤ 0.3 dB
| ΔIL≤ 0.3 dB
Mechanical durability (500 times)| ΔIL≤ 0.3 dB
Drop-off test
(drop-off height 4 m, once per direction, totally 3 times)
| ΔIL≤ 0.3 dB
Operational temperature| -30 °C to 75 °C
Connection method| Push – On
Note:
- Installation by trained staff
- APC ≥ 60 dB (room temperature), ≥ 35 dB (temperature -40 to +70 °C)
Application
FTTH – PON, LAN, WAN
Ordering code
QUICK-CURETM tool kit content OSK-QCF-100
- Assembly manual
- Tools and Consumables
OPTOKON is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
- tel. +420 564 040 111
- WWW.OPTOKON.COM
- INFO@OPTOKON.CZ