MEARI Baby 2S/1M Baby Monitor User Guide

MEARI Baby 2S/1M Baby Monitor

What’s in the box

Please consult this checklist for all parts.

Description

Installation

1. Install the camera on a flat surface.
2. Or, use the included mounting bracket to fix the camera to a clean surface.

Connection

Connect the camera to the display Power on the camera and the display, and then the camera will connect to the display automatically. The connection is distance limited, so make the distance between the camera and the display is no more than 200m.

Disconnect the camera to the display:

1. Press Menu button on the display screen, and select Management.
2. Long press OK button on the display screen to release the binding.

Reconnect the camera to the display:

1. Press Menu button on the display screen, and select management.
2. Long press the camera pairing button until you hear the prompt tone.
3. Press OK button on the display screen to start pairing.

Connect the camera to the App
The camera can be connected both to the display and the App. Generally, it is connected to the display by default.
Follow the steps below to connect the camera to the App:

1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn’t support 5 GHz Wi-Fi.
2. Download the corresponding App on your phone. Register a new account to log in or log in directly.
3. Reset the camera using a pin until the status light is red in fast blinking. (You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
4. Follow the step instructions on your smart phone to add the display, and scan nthe QR code with your camera.

Usage

Rotate the camera

You can adjust the monitoring angle for a better vision.
The direction buttons on the display screen are available when the camera is powered on. Press direction buttons to rotate the camera horizontally and vertically, for a better vision.

Photo & video

• Take a photo:
  You can take a photo when you want to capture an interesting scene of your baby. Press Menu button on the display screen, select a photo.

• Record a video:
  You can record a video when you want to capture a meaningful time of your baby.
  Press Menu button on the display screen, select and press OK to record a video.

• View the taken photos and recorded videos:

  1. Press Menu button on the display screen, select and press OK to  enter the interface.
  2. Select the camera and date, select the photo or video you want to view, and press OK to enter preview mode.
  3. For a video, press OK to play or pause in the preview mode.
  4. Press backup button to quit preview or return to main menu.

• Play music
  You can play music to sooth your baby when baby is crying or sleeping. There are various soft music to select.
  Press Menu button on the display screen, select and press OK to enter music interface. You can select different music, change the music cycle mode, or adjust the music volume.

• Feeding reminder
  Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet.

  1. Press Menu button on the display screen, and select reminder.
  2. Press UP and DOWN direction buttons to select between 4 time options, and press OK to start time setting.
  3. When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second and on/off; and press UP and DOWN direction buttons to change values and select on or off.
  4. Press OK to save settings.
  5. Select on or off to open or close feeding reminders.
     You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the display screen.

• Humiture detection
  You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures.

  1. Press Menu button on the display screen, and select detection.
  2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to start setting.
  3. When start to set up one option, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units.
  4. Press OK to save settings.
  5. In Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range.

• Smart care
  You can turn on functions of motion detection, noise detection and cry detection, so that you can know the baby status immediately, no matter you are sleeping, working, cooking and so on.

  1. Press Menu button on the display screen, and select

  2. Press UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection and alarm volume, and press OK to start setting.

  3. When start to set up one detection mode, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to adjust sensitivity.
     You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity.

  4. When set up the alarm volume, press LEFT and RIGHT direction buttons to adjust.

  5. Press OK to save settings.

  6. There will be a alarm when the set detection is triggered, press OK to stop alarm.

• General setting

Set up brightness

1. Press Menu button on the display screen, select and press OK to enter  the interface.
2. Press UP and DOWN direction buttons to adjust brightness. Set up time:

Set up time

1. Press Menu button on the display screen, and select
2. Press direction buttons to change date, time and time displaying mode.

Set up language

1. Press Menu button on the display screen, and select Language.
2. Select the language you need.

Set up sleep mode
You can set up sleep mode to increase standby time.

1. Press Menu button on the display screen, and select SLEEP MOOD
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off. Turn on and off status indicator:
   If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator, if you think it will affect your baby’s sleep.

SD card

1. Press Menu button on the display screen, and select > SD card management. Then you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up.

Upgrade

• Make sure your camera is connected to a the 2.4 GHz Wi-Fi.
  You can upgrade your camera when the upgrade alarm appears. Or Press Menu button on the display screen, and select >Device information to check whether there is a upgrade.

Low battery alarm
When the camera is low on battery, the low battery alarm will appear on the display screen. Please charge the display as soon as possible.

FAQ

1. Q: The display cannot be previewed properly?
   A: Check whether the display has connected to the camera. If not, pair the camera and the display first.

2. Q: Cannot find the pairing button?
   A: The pairing button is the call button of the camera. Long press the button for 3 seconds and follow the step instructions of the display. (To enter the pairing interface of the display, press Menu button on the display screen, and select > Camera Management.)

3. Q: What if the display screen is stuck and it doesn’t work while pressing any buttons?
   A: Press the reset button of your display with pin, and then long-press the power button of your display to restart it.

4. Q: Why the camera or the display cannot identify the SD card?
   A: Confirm whether the SD card is normally available and the format is FAT32.

5. Q: Why I can’t get the notifications with my cell phone App when I connect the camera to the display?
   A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

Functions

• Pan/Tilt
  Rotate your camera by sliding on your smartphone, providing you with a good vision.

• Video flip
  Flip your video stream up or down for maximum flexibility.

• Motion detection
  The camera can detect movement, and then the camera will send you push notifications and app alerts.

• Crying detection
  The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts.

• Temperature & humidity detection
  The camera can detect the temperature and humidity of the environment, and the camera will send you push notifications and app alerts.

• Record
  Support 24H continuous recording with high capacity SD storage or Cloud storage.

• Day & Night
  Never miss a moment, even in complete darkness, with powerful night-vision technology.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>