LIFX LCCE12US Color Candle WIFI LED Bulb User Manual
- June 5, 2024
- LIFX
Table of Contents
- LIFX LCCE12US Color Candle WIFI LED Bulb
- M E E T YOU R N E W L I F X C A N D L E
- AN L L YO U N E E D TO B E G I N IS . . .
- SET-UP IS SIMPLE
- HomeKit
- FAQS
- REGU L ATORY & COMPLI ANCE INFORM ATION
- FCC Compliance Statement U.S.
- INTERFACE
- LIMITED WARR ANT Y
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LIFX LCCE12US Color Candle WIFI LED Bulb
M E E T YOU R N E W L I F X C A N D L E
LIFX is color-changing, Wi-Fi lighting that you control with your smartphone or tablet. With the LIFX app you can switch your lights on and off, dim, adjust brightness and color, set different scenes and set wake up and sleep timers. You can control individual lights, rooms, or the entire house. Even if you don’t have your smartphone with you, LIFX still functions like a normal light by switching on and off with a regular light switch.
AN L L YO U N E E D TO B E G I N IS . . .
- A device running iOS 11.3+ or Android 4.1+
- A Wi-Fi Internet connection. The Wi-Fi access point must be 802.11b, g or n compliant with WPA2 security and a DHCP-configured connection available for every connected LIFX® light.
- The LIFX app from your app store or at go.life.co
SET-UP IS SIMPLE
HomeKit
Apple HomeKit technology provides an easy, secure way to control your
home’s lights, doors, thermostats, and more from your iPhone®, iPad®, or iPod
touch®.
To control this HomeKit-enabled accessory, iOS 11.3 or later is recommended.
An internet/data connection is required while setting up Apple HomeKit as you
will need to connect your LIFX product to your Wi-Fi access point/router.
Controlling this HomeKit-enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later
set up as a home hub. Use of the Works with Apple HomeKit logo means that an
electronic accessory has been designed to connect specifically to iPod touch,
iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
Keep your user manual for the HomeKit QR code in the future. Apple, iPhone,
iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries. HomeKit is a trademark of Apple Inc.
FAQS
Connectivity, setup and troubleshooting
-
What type of Wi-Fi do I need ?
Like many devices, LIFX lights connect to the 2.4Ghz band of Wi-Fi not 5Ghz. If you have more than one available network on your router this could mean you are connected to 5Ghz and need to try your other network. All Wi-Fi routers have a 2.4 GHz band so if you only have one network you will be on the right one to get started. -
How do I reset a light to factory settings?
Turn the light off and on at the switch 5 times, about one switch a second (not too fast). The lights will cycle through four colors or whites and stop on white when the reset has been successful. This is how you would remove light from a network to then add it to a new one. -
I’ve set up a new network / changed my password, how do I re-connect my lights ?
If you’ve changed your Wi-Fi password or set up a new router with a new password, you will need to reset your lights and connect them through the app as you did the first time you connected them. This is so you can assign the new, correct password for the security of each device. -
How do I connect other devices and services like Voice control or IFTTT ?
This can vary depending on the service you’d like to use. You can find out about major partner products LIFX work well with at LIFX.com. For advice on connecting services you can find instructions for these at go.LIFX.com
REGU L ATORY & COMPLI ANCE INFORM ATION
Specifications
To see a full list of LIFX® product specifications applicable to this Product,
go to www.lifx.com/compliance
Certification
LIFX® adheres to the certification requirements for various regions around the
world.
To see a full list of LIFX® certifications please go to
www.lifx.com/compliance to ensure LIFX®
complies with the certification requirements in your region.
FCC Compliance Statement U.S.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used under the instructions, may interfere
with radio or television reception, which can be determined by turning the
equipment off and on. The user is encouraged to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not approved by LIFX can void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Contains FCC ID: 2AA53-LCM3
EU Declaration of Conformity and Industry Canada Compliance.
LIFX complies with all applicable EU Directives and Industry Canada Standards.
This Class B RFLD complies with the Canadian standard ICES-005.
Contains IC: 11475A-LCM3. See
www.lifx.com/compliance
RF E XP OSU RE WA RN IN G
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
CHANGES & MODIFIC ATION
Changes or modifications made to this device may void certification of the
device. Changes or modifications made to this unit not expressly approved by
the party responsible for compliance could void the user‘s authority to
operate the equipment.
Frequency Information
- Frequency Range (US & Canada): 2412-2462 MHz;
- Frequency Range (Europe & Australia): 2412-2472 MHz;
- Maximum radio-frequency power transmitted: 18.75 dBm
- Modulation type : IEEE 802.11 b/g/n20
RECOMMENDED IN STALL ATION REQUIREMENTS
This device should only be installed in light fittings and fixtures that are
designed to accept each fitting. Lamps, fittings and fixtures that are
designed to accept smaller or lower wattage light bulbs may result in the
LIFX® bulb operating below its optimal capacity. For optimal performance it is
recommended that LIFX® bulbs be fitted into fixtures that provide sufficient
air flow through and around the bulb. It is recommended that the LIFX® bulb be
installed away from other devices designed to receive or transmit radio
signals. It is recommended LIFX® bulb/s be installed and operated at a minimum
distance of 30 cm from the body. For lamps with a weight significantly higher
than that of lamps for which they are a replacement, attention should be drawn
to the fact that the increased weight may reduce the mechanical stability of
certain luminaires and may impair contact making and lamp retention.
INTERFACE
LIFX® has been designed to minimise interference with other radio, broadcast
or receiving devices. The manufacturer is not responsible for any interference
caused as a result of modifications to the product or by failure to adhere to
the recommendations in this document and at support.lifx.com. This device
generates radio frequency energy and, if not installed in accordance with the
“recommended installation requirements” may cause harmful interference to
radio communication devices. If the device is causing radio interference it is
recommended that the user try:
- relocating the device to a different place;
- adjust the antenna on the receiving device;
- consult a technician experienced in radio interference.
NOTICES
- This device is not intended for use with emergency exits
- Use in open luminaire only
- Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
LIFX® is not designed for use in:
- Excessively hot environments (e.g. close to ovens, radiators, heaters, etc.)
- Regions or countries other than that in which the product was intended for
- Outdoor and wet areas, except where the LIFX® Product specifies that it is for both Indoor and Outdoor use
WHEN USING LIFX®
- Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing a LIFX® bulb from the fitting
- Do not open the device, as this will void the warranty
- Do not clean the device when it is powered on and or connected to the light socket
- If cleaning the product, use a soft dry cloth, do not use cleaning agents
- Remove the waterproofing silicone sleeve from BR30 outdoor capable bulbs when using them indoors
LIMITED WARR ANT Y
GENERAL
- Lifi Labs Inc. (“LIFX®“) warrants the LIFX® bulb (the “Product“), and only the Product, against defects in materials and workmanship under normal use (“Defect”) for a period of TWO YEARS (730 days) from the date of retail purchase by the original purchaser (“Warranty Period“). Under this Limited Warranty, if a defect arises and a valid claim is received by LIFX® within the Warranty Period, at its option and to the extent permitted by law, LIFX® will either: 1. repair the Product at no charge, using new or refurbished replacement parts –or–
- exchange the Product with a new or refurbished Product. In the event of a defect, to the extent permitted by law, these are your sole and exclusive remedies. A replacement Product or part assumes the remaining warranty of the original Product or ninety (90) days from the date of replacement or repair, whichever is longer. When a Product or part of the Product is exchanged, any replacement item becomes your property and the replaced item becomes LIFX®‘s property. Parts provided by LIFX® in fulfilment of its warranty obligation must be used in Products for which warranty service is claimed.
EXCLUSIONS & LIMITATIONS
This Limited Warranty applies only to the Product manufactured by or for LIFX®
that can be identified by the “LIFX® trademark, trade name, or logo affixed to
it. The Limited Warranty does not apply to any (a) LIFX® products and services
other than the Product, (b) non- LIFX® hardware product, (c) consumables (such
as batteries), or (d) software, even if packaged or sold with the Product or
embedded in the Product. Refer to the licenses accompanying the software for
details of your rights with respect to its use. LIFX® does not warrant that
the operation of the Product will meet your needs or requirements or be
uninterrupted or error free. LIFX® is not responsible for damage arising from
failure to follow instructions relating to the Product‘s use or from failures
resulting from inadequate electrical supply or internet access. This warranty
does not apply to a Product or part of the Product that has been altered or
modified (e.g. to alter functionality or capability) by anyone who is not a
representative of LIFX® or if the Product is inserted or installed in a casing
not provided by LIFX®. In addition, this Limited Warranty does not apply to
Defects or damage caused by (a) use with non-LIFX® products; (b) accident,
abuse, misuse, flood, fire, earthquake or other external causes or abnormal
conditions; (c) operating the product outside the permitted or intended uses
or conditions described by LIFX® or with improper voltage or power supply; or
(d) service (including upgrades and expansions) performed by anyone who is not
a representative of LIFX®. Recovery and reinstallation of software programs
and user data are not covered under this Limited Warranty. This Limited
Warranty does not cover the cost of returning the Product to LIFX®; this is
your responsibility. No LIFX® reseller, agent, or employee is authorized to
make any modification, extension, or addition to this Limited Warranty. If any
term is held to be illegal or unenforceable, the legality or enforceability of
the remaining terms shall not be affected or impaired.
EXCLUSIVE WARRANTIES
THE WARRANTIES SET FORTH HEREIN ARE THE EXCLUSIVE WARRANTIES PROVIDED BY
LIFX®, AND EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL OTHER
WARRANTIES, WHETHER EXPRESS OR IMPLIED WARRANTIES (INCLUDING WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT) ARE
HEREBY EXCLUDED.
LIMITATION OF DAMAGES
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, LIFX® SHALL NOT BE LIABLE
FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM
ANY USE OF THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL THEORY. LIFX®’S LIABILITY FOR DAMAGES RESULTING FROM
ANY USE OF THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL THEORY WILL BE LIMITED TO THE ORIGINAL COST PAID FOR
OF THE DEFECTIVE PRODUCT.
CONSUMER PROTECTION
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights
that vary by state to state.
GOVERNING LAW AND ARBITRATION
This Limited Warranty shall be governed by the laws of the State of California
without giving effect to any conflict of laws principles that may provide the
application of the law of another jurisdiction and without regard to the
Convention on Contracts for the International Sale of Goods. Any claim or
dispute in connection with this Limited Warranty shall be resolved in a cost
effective manner through binding non appearance based arbitration. The
arbitration shall be initiated through an established alternative dispute
resolution provider mutually agreed upon by the parties. The alternative
dispute resolution provider and the parties must comply with the following
rules: a) the arbitration shall be conducted by telephone, online and/or be
solely based on written submissions, the specific manner shall be chosen by
the party initiating the arbitration; b) the arbitration shall not involve any
personal appearance by the parties or witnesses unless otherwise mutually
agreed by the parties; and c) any judgement on the award rendered by the
arbitrator may be entered in any court of competent jurisdiction. If the
foregoing arbitration clause does not apply for any reason, you agree to
submit to the personal jurisdiction of the state courts located within San
Francisco County, California and the federal courts in the Northern District
of California for the purpose of litigating all such claims or disputes, which
courts shall have exclusive jurisdiction of such claims or disputes.
Notwithstanding the foregoing, LIFX® may seek injunctive or other equitable
relief to protect its intellectual property rights in any court of competent
jurisdiction.
AUSTRALIAN CONSUMER LAW
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
- Life Labs Management Pty Ltd
- PO Box 4048, RICHMOND EAST, VIC 3121
- PH +1 877-393-7618 or for more information visit go.LIFX.co
- Visit go.lifx.com for additional languages.
References
- App – LIFX
- App – LIFX
- Wi-Fi enabled LED smart lights - LIFX.com
- Declaration of conformity – LIFX
- Patents – LIFX
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>