LIFX LXDL6CUS 5-6 Inch E26 Retrofit 800 Lumen Dimmable Recessed Downlight User Guide
- June 9, 2024
- LIFX
Table of Contents
LIFX LXDL6CUS 5-6 Inch E26 Retrofit 800 Lumen Dimmable Recessed Downlight
Your new LIFX®
- We’re here to make light smarter. This one you can control with your smartphone, tablet and voice assistant—or even a regular light switch if need be. You can use partner automations or in-app features to make your life easier.
- To get the most out of your product, we suggest you use the LIFX app as your main control center, where you can keep your products up to date and access the full feature set. This is also where you’ll find Scheduling, Scenes and many exclusive Effects.
Setting up is easy
There are three options for setting up your LIFX light:
- The LIFX app – this is usually the best way to set your lights up and is recommended for all users.
- Alexa Simple Set-up – optional for customers who have purchased via Amazon, indicated Simple Set-up during purchase and have a compatible Alexa device.
- Apple HomeKit – optional for Apple HomeKit users who want to exclusively use the Home App.
LIFX app Set-up
- Power on your LIFX light
- Download the LIFX app
- Open the app and follow the prompts on screen.
You will need to create your LIFX account to login to the app. You will be asked to connect to your Wi-Fi network and enter your Wi-Fi password.
Technical Requirements:
- A device running iOS 12.0+ or Android 7.0+
- A Wi-Fi internet connection. Wi-Fi access point must be 802.11b, g or n compliant with WPA2 security and a DHCPconfigured connection available for every connected LIFX light.
Alexa Simple Set-up
- Power on your LIFX light
- Open your Alexa app
- If your Alexa app says “New light found”, you’re all set.
If no, tap the devices icon in the lower right of the Alexa app. Click the + icon to get started.
Works with all Amazon Echo devices except for Echo (1st Gen), Echo Dot (1st Gen), and Echo Input.
Technical Requirements:
Alexa device must be set up prior to setting up your LIFX light which is
registered to your Amazon account. Your LIFX light must be purchased from
Amazon using the Amazon user account that is registered to your Echo device.
HomeKit™
-
Power on your LIFX light
-
Get the Apple Home App
-
Use the camera on your iOS device to scan the Homekit QR code on the back of this manual.
OR
Open the Apple Home App and click + or “add accessory”.- Keep your user manual for the HomeKit QR code in the future.
- Apple, and HomeKit are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
Technical Requirements:
- To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended. An internet / data connection is required while setting up Apple HomeKit as you will need to connect your LIFX product to your Wi-Fi access point / router. Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system.
- Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
FAQS
-
What type of Wi-Fi do I need ?
Like many devices, LIFX lights connect to the 2.4Ghz band of Wi-Fi, not 5Ghz. If you have more than one available network on your router, this could mean you are connected to 5Ghz and need to try your other network. Almost all Wi-Fi routers will have a 2.4 GHz band so if you only have one network you will likely be on the right one to get started. -
How do I reset a light to factory settings ?
Turn the light off and on at the switch 5 times, about one switch a second (not too fast). The lights will cycle through four colors or whites and stop on white when the reset has been successful. This is how you would remove a light from a network to then add it to a new one. -
I’ve set up a new network / changed my password, how do I re-connect my lights ?
If you’ve changed your Wi-Fi password or set up a new router with a new password, you will need to reset your lights and connect them through the app as you did the first time you connected them. This is so you can assign the new, correct password for the security of each device. -
How do I connect other devices and services like Voice control or IFTTT ?
This can vary depending on the service you’d like to use. You can find out about major partner products LIFX work well with at LIFX.com. For advice on connecting services you can find instructions for these at go.LIFX.com
Need more help?
Visit the LIFX Help Center at support.lifx.com
Regulations & Compliance
FCC Compliance Statement U.S.
- This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference in a residential installation.
- This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may interfere with radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not approved by LIFX can void the user’s authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation. Contains FCC
ID: 2AA53-LCM3
Industry Canada Compliance.
LIFX complies with all applicable Industry Canada Standards. This Class B RFLD
complies with the Canadian standard ICES-005. Contains IC: 11475A-LCM3. See
www.lifx.com/compliance
RF exposure warning (Industry Canada)
- This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
- This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
Changes & modification
Changes or modifications made to this device may void certification of the
device. Changes or modifications made to this unit not expressly approved by
the party responsible for compliance could void the user‘s authority to
operate the equipment.
Frequency Information
Frequency Range (Europe & Australia): 2412-2472 MHz; Maximum radio-frequency
power transmitted: 18.75 dBm; Modulation type : IEEE 802.11 b/g/n20
Installation requirements & recommendation
This device should only be installed in light fittings and fixtures that are
designed to accept each fitting. Lamps, fittings and fixtures that are
designed to accept smaller or lower wattage light bulbs may result in the
LIFX® bulb operating below its optimal capacity. For optimal performance it is
recommended that LIFX® bulbs be fitted into fixtures that provide sufficient
air flow through and around the bulb. It is recommended that the LIFX® bulb be
installed away from other devices designed to receive or transmit radio
signals. It is recommended LIFX® bulb/s be installed and operated at a minimum
distance of 30 cm from the body. For lamps with a weight significantly higher
than that of lamps for which they are a replacement, attention should be drawn
to the fact that the increased weight may reduce the mechanical stability of
certain luminaires and may impair contact making and lamp retention.
Interference
- LIFX has been designed to minimise interference with other radio, broadcast or receiving devices.
- The manufacturer is not responsible for any interference caused as a result of modifications to the product or by failure to adhere to the recommendations in this document and at support.lifx.com. This device generates radio frequency energy and, if not installed in accordance with the “recommended installation requirements” may cause harmful interference to radio communication devices. If the device is causing radio interference it is recommended that the user try:
- relocating the device to a different place;
- adjust the antenna on the receiving device;
- consult a technician experienced in radio interference.
Notices
- Installers should examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any damaged parts prior to installation of the retrofit kit.
- This device is not intended for use with emergency exits
- Use in open luminaire only
- Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
LIFX® is not designed for use in:
- Excessively hot environments (e.g. close to ovens, radiators, heaters, etc.)
- Regions or countries other than that in which the product was intended for
- Outdoor and wet areas, except where the LIFX®Product specifies that it is for both Indoor and Outdoor use.
When using LIFX
- Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing a LIFX bulb from the fitting
- Do not open device, as this will void the warranty
- Do not clean the device when it is powered on and or connected to the light socket
- If cleaning the product, use a soft dry cloth, do not use cleaning agents
Limited Warranty
General
- Feit Electric Co (“LIFX“) warrants the LIFX bulb (the “Product“), and only the Product, against defects in materials and workmanship under normal use (“Defect”) for a period of TWO YEARS (730 days) from the date of retail purchase by the original purchaser (“Warranty Period“). Under this Limited Warranty, if a defect arises and a valid claim is received by LIFX® within the Warranty Period, at its option and to the extent permitted by law, LIFX will either: 1. repair the Product at no charge, using new or refurbished replacement parts –or– 2. exchange the Product with a new or refurbished Product.
- In the event of a defect, to the extent permitted by law, these are your sole and exclusive remedies. A replacement Product or part assumes the remaining warranty of the original Product or ninety (90) days from the date of replacement or repair, whichever is longer. When a Product or part of the Product is exchanged, any replacement item becomes your property and the replaced item becomes LIFX‘s property. Parts provided by LIFX in fulfilment of its warranty obligation must be used in Products for which warranty service is claimed.
Exclusions & Limitations
This Limited Warranty applies only to the Product manufactured by or for LIFX
that can be identified by the “LIFX trademark, trade name, or logo affixed to
it. The Limited Warranty does not apply to any (a) LIFX products and services
other than the Product, (b) non- LIFX hardware product, (c) consumables (such
as batteries), or (d) software, even if packaged or sold with the Product or
embedded in the Product. Refer to the licenses accompanying the software for
details of your rights with respect to its use. LIFX does not warrant that the
operation of the Product will meet your needs or requirements or be
uninterrupted or error free. LIFX is not responsible for damage arising from
failure to follow instructions relating to the Product‘s use or from failures
resulting from inadequate electrical supply or internet access. This warranty
does not apply to a Product or part of the Product that has been altered or
modified (e.g. to alter functionality or capability) by anyone who is not a
representative of LIFX or if the Product is inserted or installed in a casing
not provided by LIFX. In addition, this Limited Warranty does not apply to
Defects or damage caused by (a) use with non-LIFX products; (b) accident,
abuse, misuse, flood, fire, earthquake or other external causes or abnormal
conditions; (c) operating the product outside the permitted or intended uses
or conditions described by LIFX or with improper voltage or power supply; or
(d) service (including upgrades and expansions) performed by anyone who is not
a representative of LIFX. Recovery and reinstallation of software programs and
user data are not covered under this Limited Warranty. This Limited Warranty
does not cover the cost of returning the Product to LIFX; this is your
responsibility. No LIFX reseller, agent, or employee is authorized to make any
modification, extension, or addition to this Limited Warranty. If any term is
held to be illegal or unenforceable, the legality or enforceability of the
remaining terms shall not be affected or impaired.
EXCLUSIVE WARRANTIES
THE WARRANTIES SET FORTH HEREIN ARE THE EXCLUSIVE WARRANTIES PROVIDED BY LIFX,
AND EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED WARRANTIES (INCLUDING WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT) ARE
HEREBY EXCLUDED.
LIMITATION OF DAMAGES
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, LIFX SHALL NOT BE LIABLE
FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM
ANY USE OF THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL THEORY. LIFX’S LIABILITY FOR DAMAGES RESULTING FROM
ANY USE OF THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL THEORY WILL BE LIMITED TO THE ORIGINAL COST PAID FOR
OF THE DEFECTIVE PRODUCT.
Consumer Protection
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights
that vary by state to state.
Governing Law and Arbitration
This Limited Warranty shall be governed by the laws of the State of California
without giving effect to any conflict of laws principles that may provide the
application of the law of another jurisdiction and without regard to the
Convention on Contracts for the International Sale of Goods. Any claim or
dispute in connection with this Limited Warranty shall be resolved in a cost
effective manner through binding non appearance based arbitration. The
arbitration shall be initiated through an established alternative dispute
resolution provider mutually agreed upon by the parties. The alternative
dispute resolution provider and the parties must comply with the following
rules: a) the arbitration shall be conducted by telephone, online and/ or be
solely based on written submissions, the specific manner shall be chosen by
the party initiating the arbitration; b) the arbitration shall not involve any
personal appearance by the parties or witnesses unless otherwise mutually
agreed by the parties; and c) any judgement on the award rendered by the
arbitrator may be entered in any court of competent jurisdiction. If the
foregoing arbitration clause does not apply for any reason, you agree to
submit to the personal jurisdiction of the state courts located within San
Francisco County, California and the federal courts in the Northern District
of California for the purpose of litigating all such claims or disputes, which
courts shall have exclusive jurisdiction of such claims or disputes.
Notwithstanding the foregoing, LIFX may seek injunctive or other equitable
relief to protect its intellectual property rights in any court of competent
jurisdiction.
ABOUT COMPANY
- FEIT ELECTRIC CO. is the exclusive owner of rights and interests in and to the mark LIFX and the LIFX logo.
- Covered by patents.
- lifx.com/patents
- © 2022 All rights reserved.
Product Details
- Product Dimensions (LxWxH) : 7.45 x 7.45 x 2.5 in
- Wi-Fi 802.11 b/g/n: 120V – 60Hz
LIFX works diligently to ensure that LIFX products and their packaging materials comply with all relevant regulations in the regions we supply. We will also provide on request information regarding compliance if it is not immediately available at the link below. See lifx.com/compliance for notices for your region.
References
- App – LIFX
- Wi-Fi enabled LED smart lights - LIFX.com
- Patents – LIFX
- Declaration of conformity – LIFX