IPAN IPAN IPN-BPV2 Battery Pack Wireless Charger For Table User Guide
- June 16, 2024
- IPAN IPAN
Table of Contents
BATTERY PACK
WIRELESS CHARGER FOR TABLE
USER GUIDE
IPN-BPV2 Battery Pack Wireless Charger For Table
Check the contents of packs.
BATTERY PACK
THE ANTENNAS ACCORDING TO THE CHOSEN PACK
ACCESSORIES
MOUNTING BATTERY PACK
NOTE : To visualise the assembly of the battery pack, follow the
instructions in the video of the QR code.
SCAN QR CODE focus the camera on the code for display
https://www.ipanipan.com
/install-battery-packs/
QI COMPATIBILITY
NOTE : In order to use wireless charging, first check that your phone is
Qi compatible. Scan the QR code to access the list of compatible devices.
SCAN QR CODE focus the camera on the code for display
https://www.ipanipan.com/qi-
certified-devices/
BATTERY INSERTION
Inserting the battery in the table dock
If the indicator light is green, the battery is
correctly inserted.
CHARGE THE PHONE
Place the phone on the wireless charging station
Check that your phone is centred on the
station
if your
phone is not Qi compatible, you can use the USB slots.
RECHARGE THE BATTERY
When the
light is red, the battery needs to be recharged.
Unlocking and removing the battery with the
magnetic security key
Place the battery in the charging tray
Flashing red light :
battery charging
Steady green light : battery charged
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
During the operation of device a distance of 15 cm surrounding the device and
20 cm above the top surface of the device must be respected.
IPANIPAN.com
FOLLOW US ON
Documents / Resources
| IPAN
IPAN IPN-BPV2 Battery Pack Wireless Charger For
Table
[pdf] User Guide
2AO6R-IPN-BPV2, 2AO6RIPNBPV2, IPN-BPV2, IPN-BPV2 Battery Pack Wireless Charger
For Table, Battery Pack Wireless Charger For Table, Pack Wireless Charger For
Table, Wireless Charger For Table, Charger For Table, Table
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>