EKVIP 021661 Christmas Tree Star Instruction Manual
- June 3, 2024
- EKVIP
Table of Contents
EKVIP 021661 Christmas Tree Star
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack.
- Only intended to be used indoors.
- Check that no light sources are damaged.
- Do not connect two or more string lights together electrically.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress. Do not hang any objects on the product.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The string of lights may only be used if all seals are fitted correctly.
SYMBOLS
- Safety class II.
- Only intended to be used indoors.
- Approved as per applicable directives.
TECHNICAL DATA
- Input voltage, transformer 230 V ~ 50 Hz
- Output voltage, transformer 4.5 V
- Output 1.35 W
- Safety class II
DESCRIPTION
- Top star with mount
- Aeroplane
- Flag
- Steel wire
- Transformer
ASSEMBLY
- Fasten the flag to the aeroplane.
- Fasten the top star to the tree.
- Fasten the steel wire to the top star.
- Fasten the aeroplane to the steel wire.
- Connect the transformer to the mains.
HOW TO USE
- Connect the transformer to the mains.
- Start the product by putting the switch in the ON position.
- Switch off the product by putting the switch in the OFF position.
Read User Manual Online (PDF format)
Loading......