EKVIP 022465 String Lights Instruction Manual
- October 27, 2023
- EKVIP
Table of Contents
EKVIP 022465 String Lights
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack
- Designed for indoor and outdoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together electrically.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING! The string of lights may only be used if all seals are fitted correctly
Symbols
- Read the instructions.
- Class II.
- Approved as per applicable directives.
- Recycle a discarded product in accordance with applicable regulations.
TECHNICAL DATA
- Input voltage, transformer 230 V ~ 50 Hz
- Output voltage, transformer 31 V DC
- Output 9 W
- No. of LEDs 1000
- Protection rating IP44
- Size L100 m
USE
- Remove the string of lights from the packaging.
- Plug the plug into a PowerPoint.
- Press the switch to switch on the light sources.
- By pressing the switch the following number of times it is possible to activate different options:
Number of times Options
- Once Constant extra warm white light.
- Twice Constant extra warm white timer controlled light (8 h/5 h/4 h/7 h)
- 3 times OFF.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>