EKVIP 022438 Light Garlands Connectable System Instruction Manual
- October 27, 2023
- EKVIP
Table of Contents
EKVIP 022438 Light Garlands Connectable System
SAFETY INFORMATION
Read the operating instructions carefully before use.
Please retain for future reference.
- Do not connect the set to the mains while it is still in the pack.
- The bulbs are not replaceable.
- Do not connect this set to another set.
- The power cord for this set is not replaceable, if damaged discard the complete product.
- For indoor and outdoor use.
- Warning: this set must not be used unless all the seals are in place.
SYMBOLER
- Read the instructions.
- Safety class III.
- Approved as per applicable directives.
- Recycle a discarded product in accordance with applicable regulations.
TECHNICAL DATA
- Input voltage 31 VDC
- Output 2 W
- Bulbs 80
- Protection rating IP44
- Length 500 cm
PRODUCT INFORMATION SHEET
|
Supplier’s name or trademark:| EKVIP|
Supplier’s address (a):| Jula AB, Box 363, 532 24 SK| ARA
Model identifier:| 022435|
Type of light source:| LED|
Lighting technology used:| LED| | Non-directional or directional:| NDLS
Light source connected to mains supply or light source not connected to mains
supply:|
NMLS
| |
Connected light source (CLS):
|
no
Colour-tuneable light source:| no| | Envelope:| –
High luminance light source:| no| | |
Anti-glare shield:| no| | Dimmable:| no
Product p| arameters
Parameter| Value| | Parameter| Value
General produc| t parameters:
Energy consumption in on-mode (kWh/1000 h)| 3| | Energy efficiency class| F
Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere
(360˚), in a wide cone (120˚) or in a narrow cone (90˚).|
270 in sphere (360°)
| | Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be set.|
2 700
On-mode power (Pon), expressed in W.|
2,5
| | Standby power (Psb), expressed in W and rounded to the second decimal.|
0,00
Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal.|
–
| | Colour rendering index, rounded to the nearest integer, or the range of CRI-values that can be set.|
80
Outer dimensions without separate control gear, lighting control parts and non-lighting control parts, if any (millimetre).| Height| 400| |
Spectral power distribution in the range 250 nm to 800 nm, at full-load.
|
See image in last page
Width| 3 000|
Depth| –|
Claim of equivalent power (c)| –| | If yes, equivalent power (W)| –
| | |
Chromaticity coordinates (x and y)
| 0,468
0,418
Parameters for LED and OLED light sources:|
R9 colour rendering index value| 20| | Survival factor| 1,00
The lumen maintenance factor| 0,96| | |
Parameters for LED and OLED mains light
sources:|
Displacement factor (cos φ1)| –| | Colour consistency in mcadam ellipses| 5
Claims that an LED light source replaces a fluorescent light source without
integrated ballast of a particular wattage.|
-(b)
| |
If yes then replacement claim (W)
|
–
Flicker metric (Pst LM)| –| | Stroboscopic effect metric (SVM)| –
(a) ”-”: not applicable;
(b) ”-”: not applicable;
|
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>