EKVIP Battery Eliminator Power Supply Adapter Instruction Manual
- October 27, 2023
- EKVIP
Table of Contents
Battery Eliminator Power Supply Adapter
Instruction Manual
Battery Eliminator Power Supply Adapter
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack.
- Intended for indoor use.
- Neither the cord nor the transformer can be replaced. Discard the product if the power cord or transformer gets damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress.
- Do not use the product together with normal batteries or rechargeable batteries.
- Insert the adapter battery with the correct polarity.
- This is not a toy. Be careful if using the product near children.
- Recycle the product when it has reached the end of its useful life in accordance with local regulations.
WARNING!
The product must only be used when all the seals are correctly fitted.
SYMBOLS
**** | Read the instructions. |
---|---|
Intended for indoor use. | |
**** | Approved as per applicable directives. |
Safety class II. | |
**** | Recycle discarded product in accordance with local regulations. |
TECHNICAL DATA
Rated voltage | 4.5 VDC |
---|---|
Output | 4.5 W |
Safety class | II |
Protection rating | IP20 |
DESCRIPTION
- Transformer
- Adapter battery (with connected cord)
- Line battery (white)
- Resistor battery (yellow)
FIG. 1
USE
BEFORE USE
- Check before use that the output voltage on the battery adapter is the same as the rated voltage for battery powered product.
- Check that the adapter battery is inserted with the correct polarity for the product.
The transformer and adapter battery must not be used with the incorrect polarity.
WARNING!
Do not use the product together with normal batteries or rechargeable
batteries – risk that the battery will explode.
HOW TO USE
WARNING!
Do not use the product together with normal batteries or rechargeable
batteries – risk that the battery will explode.
3 X AAA
- Insert the adapter battery (2) and line batteries (3) in the battery compartment with the correct polarity in accordance with the markings inside.
- Connect the transformer to the mains.
FIG. 2
2 X AAA
- Insert the adapter battery (2) and resistor battery (yellow (4)) in the battery compartment with the correct polarity in accordance with the markings inside.
- Connect the transformer to the mains.
FIG. 3
WWW.JULA.COM
© JULA AB • 2021-09-02
JULA AB
BOX 363, 532 24 SKARA, SWEDEN
Documents / Resources
|
EKVIP Battery Eliminator Power Supply
Adapter
[pdf] Instruction Manual
Battery Eliminator Power Supply Adapter, Power Supply Adapter, Battery
Eliminator Supply Adapter, Supply Adapter, Adapter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>