GOODWE GM1000D Three-Phase Smart Meter Installation Guide
- June 5, 2024
- GOODWE
Table of Contents
Quick Installation Guide
Smart Meter
(GM1000D/GM3000/GM1000)
V1.0 -2022-01-25
Product Introduction
Installation
Packing List
[1]: For GM1000D and GM3000 only.
[2]: GM1000D x 8; GM1000 x 4; GM3000 x 6.
Installation and Cable Connection
Wiring System
GM1000D
- Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
- CT direction: House (K)–>Grid (L).
GM1000
- Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
- CT direction: House (K)–>Grid (L).
GM3000
- Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
- CT direction: House (K)–>Grid (L).
Commissioning
Power ON
Step 1 Connect the smart meter cables.
Step 2 Power on the inverter and make sure that the inverter is working
normally. Then the smart meter is powered on.
Indicator
| Type | Status | Description |
|---|---|---|
| Steady on | Power on | |
| Off | Power off | |
| Steady on | Purchasing from the utility grid. | |
| Blinking | Selling to the utility grid. | |
| Blinking | The communication is normal. | |
| Blink 5 | The meter is resetting |
Reset Button
| Press Time | Description |
|---|---|
| < 3s | Reset the smart meter. |
| 5s | Restore factory settings. |
| >10s | Restore factory settings and clear the historical energy data. |
Technical Parameters
| Model | GM1000D | GM1000 | GM3000 |
|---|---|---|---|
| Application | Single-phase | Single-phase | Three-phase |
| Voltage | Nominal Voltage | 110V/230V | 3 x 230V/380V |
| Voltage Range | 100V-240V | ||
| Frequency | 50Hz/60Hz | ||
| Current Input | Nominal Current | CT in: 120A/40mA | |
| Current Range | 0.48A-120A | ||
| Self-Consumption | <3W | ||
| Data Detection | CurrentNoltage/Active Power/Reactive Power/Power |
Factor/Frequency
Energy Calculation| Active/Reactive Power Energy
Precision| Voltage/Current| Class I
Active Power| Class I
Reactive Power| Class II
Communication| RS485(Bund Rate 9600/Modbus Protocol/Communication cable max.
length 100m)
Interface| 3 LED (Power, Energy Consumption, Communication), USB port, Reset
button
Mechanical| Size (L xWxH mm)| 36 x 85 x 66.5
Weight| 360g| 250g| 450g
Protection Class| IP20 (For indoor use)
Installation Method| Mounting rack
Operating Temperature| -25 – +60° C
Operating Humidity| <95%, No condensation
Altitude| <2000m
EU Declaration of Conformity
The module sold in the European market meets the following directives and requirements:
- Electromagnetic compatibility Directive 2014/30/EU (EMC)
- Electrical Apparatus Low Voltage Directive 2014/35/EU (LVD)
- Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS)
- Waste Electrical and Electronic Equipment 2012/19/EU
- Registration, Evaluation, Authorization, and Restriction of Chemicals (EC) No 1907/2006 (REACH)
You can download the EU Declaration of Conformity at https://en.goodwe.com.
Official Website|
---|---
https://en.goodwe.com/| https://en.goodwe.com/contact-us.asp
No. 90 Zijin Rd., New District, Suzhou, 215011, China
**** www.goodwe.com
service@goodwe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>