VonHaus 2514087 2000W Brushed Steel Freestanding Fireplace Instruction Manual

VonHaus 2514087 2000W Brushed Steel Freestanding Fireplace

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

INTENDED USE.
This 2000W Freestanding Fireplace is designed for light domestic use only. It is not intended for heavy-duty, commercial or industrial use, and is not suitable for use outdoors.
WARNING! Do not use this appliance to dry clothes.
This appliance cannot be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have not been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. WARNING! This product is not suitable to be used on long pile carpets.
Use this appliance only as described
in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury. PRIOR TO USE.
Remove the packaging and make sure that the appliance is intact. If in doubt, do not use the appliance and contact DOMU Brands Customer Services.
Do not leave packaging materials such as bags and staples within reach of children. Dispose of packaging carefully and with consideration for the environment.
It is recommended that you retain the appliance box for seasonal storage.
For your convenience, record the date you received the appliance on the
‘Warranty’ page of these instructions and attach your proof of purchase. Retain this information in the event that warranty service is required.

SAFETY INFORMATION.

When using any electrically-powered appliance, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, or injury to persons or property.

CABLES AND PLUGS.

Check to ensure your electricity supply matches that shown on the rating label of the appliance. The appliance must only be used as rated.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for service and repair.
Do not connect the appliance to the mains voltage until completely assembled and adjusted.
Unroll the cord before operating. Operating with a coiled cord may cause overheating and risk of fire.
The use of an extension cord with this appliance is not recommended.
Do not allow the cord to come into contact with the appliance surface during operation.
Do not run the cord under carpeting, mats or rugs etc. Arrange the cord away from traffic areas so that it will not be tripped over.
Do not twist, kink or wrap the cord around the appliance as this may cause the insulation to weaken and split. Always unplug the appliance when not in use. Do not leave it unattended.
Always switch off the appliance before unplugging from the power socket. Always hold the plug when removing it from the wall, do not pull the cord.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off.

RISK OF PERSONAL INJURY.

Use this appliance only as described in this manual.
Do not use this appliance with any type of external timer.
Always operate upright, on a flat surface only.
This appliance heats up when in use. To avoid burns, do not touch the front of the appliance or any of the grilles or vents. WARNING! DO

NOT COVER.
Do not cover in any manner as the appliance may overheat and become a fire risk.
Keep all objects at least 1 meter from the front, side and rear of the appliance.
Do not operate the appliance with wet hands.
Do not immerse in liquid or use the appliance near water as this could create an electrical shock hazard.
If the appliance accidentally comes into contact with water, switch off the power supply and do not touch the appliance. Never attempt to remove the cover of the appliance. Repairs requiring opening the appliance or access to internal parts must be carried out by a qualified electrician or repair service professional. There are no user-serviceable parts of this appliance
(excluding the plug fuse).
Before moving the appliance, switch it off by unplugging it from the wall and allowing it to cool.
POSITIONING YOUR FIREPLACE.
This appliance is designed to be placed on a hard, level surface. When positioning, please keep the following points in mind:
Do not locate in areas of high foot traffic. To avoid accidents, always ensure that the power cord and appliance are in full view. Do not fit the appliance in confined spaces such as cupboards or wardrobes. Do not operate the appliance in areas where gasoline, paint or other flammable liquids are used or stored.
Do not operate the appliance in bathrooms, laundry areas or similar moist indoor locations. Do not use in the immediate surroundings of a bath, shower or swimming pool.

The appliance must not be located immediately below or in front of a socket outlet.
The socket must always be accessible in order to disconnect the appliance from the electrical supply for maintenance. Store the Fireplace carefully in a dust-free area during the off-season.
It is ideal to store the Fireplace in the box in which it was supplied.
Neatly wind the cord of the Fireplace to prevent damage.

SAFETY SYMBOLS

Please ensure you understand their meanings before operating this product in order to prevent personal injury and avoid damage to the appliance.

SPECIFICATION

1. Metal Housing
2. Frame
3. Thermostat Dial
4. Heat Switch
5. On/Off Switch
6. Decorative Pebbles
7.  Feet

INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATER

Heat Output

|  | Type of heat input for Electrical Storage Heaters only (select one)
Nominal Heat Output| ****

P nom

| ****

1.9

| ****

kW

|  | Manual heat charge control with integrated thermostat.| ****

n/a

Minimum Heat Output (indicative)| ****

P min

| ****

0.95

| ****

kW

|  | Manual heat charge control with room and/or outdoor temperature feedback.| ****

n/a

Maximum Continious Heat Output| ****

P max

| ****

1.9

| ****

kW

|  | Electronic heat charge control with room and/or outdoor temperature feedback| ****

n/a

Auxiliary electricity consumption

At nominal                        0.014

|  |  | Fan assisted heat output| n/a

heat output

| ****

EL max

| ****

(Fan

Motor) 0.014

| ****

kW

|  | Type of heat output/room temperature control (select one)
At minimum

heat output

| EL min| (Fan

Motor)

| kW|  | Single stage heat output and no room

temperature control

| no

In standy mode

| ****

EL SB

| ****

0.0

| ****

kW

|  | Two or more manual stages, no room temperature control| ****

no

 |  |  | With mechanical thermostat room temperature control| ****

yes

 | With electronic room temperature control| ****

no

 |  | Electronic room temperature control plus day timer| ****

no

 | Electronic room temperature control plus week timer| ****

no

 | Other control options (multiple selections possible)
 | room temperature control with prescence detection| ****

no

 | room temperature control with open window detection| ****

no

 | with distance control option| no
 |  | with adaptive start control| no
 | with working time limitation| no
 | with black bulb sensor| no
Contact Details| DOMU Brands Ltd, 4th & 5th Fl| oor| , The Tower, Deva City Office Park, Salford, M3 7BF

INSTALLING THE FEET

• To use the Brushed Steel Fireplace as a portable heater you will need to attach the feet to the base.
• Place the Fireplace face down on a suitable soft surface.
• Take the two feet and secure to the Base using the screws provided.
• Once attached ensure fully tightened and lift the Fireplace back upright.

OPERATION

Before use arranges the supplied pebbles into the desired layout.

NOTE: Do not move the Fireplace with the Pebbles in place. Insert the plug into mains socket.

To set a constant temperature turn the dial to the desired level.
The heater will now maintain the level of heat by cycling on and off.
NOTE: If the room temperature is warmer than the set temperature the heater will not generate heat.
NOTE: When the dial is turned you will hear a slight click this is the current room temperature.

CLEANING & CARE

CAUTION: Switch off the Fireplace and disconnect the plug from the power socket. Wait for the Fireplace to cool completely before cleaning.
To remove dust on external surfaces, wipe the Fireplace with a damp (not wet) lint-free cloth rinsed in hot soapy water only.

CAUTION: Do not use any harsh detergent or abrasive cleaners.
WARNING! Do not spray with any liquids or submerge in liquid or water.
WARNING! Do not attempt to clean the inside of the Fireplace. Do not attempt to open the Fireplace casing at any time. There are no user- serviceable parts.

SAFETY FEATURES

This Fireplace is fitted with an overheat protection switch (thermal cut-out) which will power off the appliance automatically in case of overheating. Should this occur, unplug the appliance and allow to cool fully for approximately 30 minutes.

NOTE: The Fireplace will not switch on again automatically.

Follow the operation instructions to restart the appliance after removing the source of the overheating (poor ventilation, item covering the Fireplace etc.). The Fireplace should function normally. Should the problem persist, please contact DOMU Brands Customer Services.

TROUBLESHOOTING

PROBLEM

LIGHT BUT NO HEAT

| SOLUTION

Check that the Heat Switch is switched to low/high heat.

Fireplace Switch is Switched on.

---|---

THE FIREPLACE WILL NOT POWER ON

| ****

Ensure the Fireplace is switched on and connected to mains power.

Activate the On/Off Switch. Check the fuse by replacement.

THE FIREPLACE IS NOT HEATING

| ****

Check that the Fireplace is plugged in and switched on at the mains outlet.

Make sure that the Fireplace has not gone into overheat protection mode (see ‘Safety Features’ ).

The Vents may require need cleaning.

THE FIREPLACE BECOMES DAMAGED

| ****

Discontinue use and contact DOMU Brands Customer Services.

 |

DISPOSAL INFORMATION

Please recycle where facilities exist. Check with your local authority for recycling advice.

CUSTOMER SERVICE

If you are having difficulty using this product and require support, please contact hello@domu.co.uk

WARRANTY

To register your product and find out if you qualify for a free extended warranty please go to
www.Vonhaus.com/warranty.

Please retain a proof of purchase receipt or statement as proof of the purchase date.

The warranty only applies if the product is used solely in the manner indicated in the Warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty.

Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights.
No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.

COPYRIGHT

All material in this instruction manual are copyrighted by DOMU Brands.
Any unauthorized use may violate worldwide copyright, trademark, and other laws.

Thank you for purchasing the 2000W Brushed Steel Freestanding Fireplace.
VonHaus® is a registered trademark of DOMU Brands Ltd
Made in China for DOMU Brands Ltd M24 2RW

References

• Human Rights Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>