VonHaus 2000157 Induction Hob Instruction Manual
- October 27, 2023
- vonhaus
Table of Contents
VonHaus 2000157 Induction Hob
Please read all instructions carefully before use and retain for future reference.
ATTENTION This appliance has a thermal cut out switch. The thermal cut out will activate and shut down the appliance should the appliance overheat.
CAUTION Do not immerse in water.
CAUTION hot surfaces
Please read all instructions carefully before use and retain for future reference.
INTENDED USE
Only operate the appliance for its intended purpose and within the parameters
specified in this manual.
This appliance is for domestic use only. Do not use outdoors or on wet
surfaces.
This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
supervised or given appropriate instruction concerning the product’s use by a
person responsible for their safety.
The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
GENERAL SAFETY Do not allow to be used as a toy. Children should be
supervised to ensure they do not play with the appliance.
If the appliance is not functioning properly, has been dropped, damaged, left
outdoors, or immersed in liquid, do not use, contact DOMU Brands Customer
Services. Do not use the appliance if any parts appear to be faulty, missing
or damaged.
Ensure all parts are securely attached as instructed by this instruction
manual before use.
CABLES AND PLUGS Check to ensure your electricity supply matches that
shown on the rating plate. This product should only be used as rated.
Preferably, the socket outlet should be protected by a Residual Current Device
RCD (UK/EU) Ground Fault Indicator (US).
Do not use with a damaged cable or plug. If the supply cable is damaged, it
must be replaced by a qualified engineer or authorised service agent in order
to avoid a hazard. The use of an extension cable is not recom-mended.
Do not handle the plug or appliance with wet hands. Keep the cable away from
heated surfaces.
Do not let the cable hang over the edge of the table or countertop where it
could be pulled on inadvertently by children or pets.
Do not pull the cable around sharp edges or corners. Do not leave unattended
when plugged in. Unplug from outlet when not in use.
Turn off all controls before unplugging.
Do not unplug by pulling on the cable. To unplug, grasp the plug, not the
cable.
Always unplug before performing user maintenance, connecting or disconnecting
attachments, or changing accessories.
Ensure the cable is stored safely to prevent hazards.
RISK OF PERSONAL INJURY Always locate your appliance away from the edge
of the worktop, on a firm, flat, heat-resistant surface with sufficient space
around all sides. Do not insert any objects into openings or cover the
appliance.
Do not place any cardboard, plastics or paper inside or on the appliance
unless stated in the instructions.
Do not use the appliance near any combustible surfaces. Only use suitable
cookware where applicable. Do not use outdoors or near heat sources.
Take care not to touch any surfaces that may get hot when in use. Take care
not to touch any surfaces that may remain hot for a period of time after use.
Do not overload/overfill the appliance.
When using for the first time your appliance may give off a ‘new’ smell or
vapour. This will dissipate after a few uses. Do not lift or move the
appliance whilst in use. Do not operate continuously for periods longer than
those marked on the product or indicated in the instructions.
Ensure the appliance is switched off and unplugged before changing accessories
or cleaning.
Use only as described in this manual and with DOMU Brands recommended attachments only.
CLEANING & MAINTENANCE
Never soak or immerse electrical or heating components and or a component that
has a plug attached.
Hand washing recommended; soak in warm soapy water and wipe down using a soft
sponge. To remove stubborn stains, use a non abrasive cleaning brush. Do not
use abrasive, harsh cleaning solutions or metal scouring pads.
Never wash any electrical or heating components and or a component that has a
plug attached in a dishwasher.
TECHNICAL SPECIFICATION
- Rated Voltage 220-240V
- Rated Power 2000W
- Rated Frequency 50/60Hz
COMPONENT LIST
- Ceramic Plate.
- Indicator Lights.
- Control Panel.
- LED display.
BEFORE FIRST USE
CAUTION Do not immerse in water
Wipe with a damp cloth
IMPORTANT: You will need to make full contact with the touch screen
sensors in order for all operations on the CONTROL PANEL to work. This may
require you to
make contact with the button itself and the sensory area surrounding it (it
may be necessary to use your thumb rather than finger for better coverage).
OPERATION
- Add cookware to centre first.
- Press & Hold.
- Increase or decrease power (fig 2)
- Adjust time.
- Increase or decrease temperature.
- To engage the ‘Safety Lock’ feature, press and hold – and + at the same time. Repeat to unlock.
-
- Switch off and allow to cool.
TIPS
Always position the appliance on a flat and stable surface with sufficient
space around all sides.
Ensure the area the appliance is positioned in is fully ventilated.
IMPORTANT:
- Do not use pots or pans made from aluminium, copper or aluminium alloy. Pans must have a smooth, flat base with a diameter of 12cm -26cm.
- Ensure the pan has food inside before placing on the ceramic plate.
- Stir food from time to time to ensure food is cooked evenly.
- Metal cooking utensils are not recommended since they can be heated through the induction hob if left in the pan during cooking
- Temperatures can be adjusted at any time during operation if required.
- Avoid touching any part of the appliance once in operation. The surfaces will get very hot. The use of an oven mitt is highly recommened.
- Once food is fully cooked and the appliance is switched off, allow the cooling fan to stop before disconnecting from the mains outlet.
- The fan takes a few minutes to stop.
- Allow the appliance to fully cool before cleaning.
NOTE: If the cookware is unsuitable for use, the Hob will show “E0” on
the LED Display.
NOTE: If the wrong sized pan is used, the Hob will show “E0” on the LED
Display.
ERROR CODES
-
E0
No pan in place or wrong size pan used. -
E1
Low voltage protection. -
E2
High voltage protection. -
E3
Pan has no water/contents. -
E4
Short Circuit. -
E5
Ceramic plate has overheated – allow to cool completely. -
E6
Component overheats – allow to cool sufficiently.
MAINTENANCE
CAUTION Do not immerse in water.
Wipe with a damp cloth
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE If you are having difficulty using this product and require support, please contact support@domu.co.uk
WARRANTY To register your product and find out if you qualify for a free extended warranty please go to www.vonshef.com/warranty.
Please retain a proof of purchase receipt or statement as proof of the
purchase date. The warranty only applies if the product is used solely in the
manner indicated in the warnings page of this manual, and all other
instructions have been followed accurately. Any abuse of the product or the
manner in which it is used will invalidate the warranty. Returned goods will
not be accepted unless re-packaged in its original packaging and accompanied
by a relevant and completed returns form.
This does not affect your statutory rights. No rights are given under this
warranty to a person acquiring the appliance second-hand or for commercial or
communal use.
COPYRIGHT All material in this instruction manual are copyrighted by DOMU Brands.Any unauthorised use may violate worldwide copyright, trademark, and other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
at support@domu.co.uk
VonShef is a registered trademark of DOMU Brands Ltd.
Made in China for DOMU Brands. M24 2RW.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>