VonHaus 3515180 356pc Premium Tool and Socket Set Instruction Manual
- June 5, 2024
- vonhaus
Table of Contents
3515180 356pc Premium Tool and Socket Set
Instruction Manual
Please read all instructions carefully before use and retain them for future
reference.
CAUTION Sharp edges.
Protect your hands.
Protect your eyes.
Basic safety precautions should always be followed when using hand tools.
GENERAL PRECAUTIONS This tool is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or
lack of experience or knowledge unless supervised and given appropriate
instruction regarding the correct use of the tool by a person responsible for
their safety. This tool is not a toy. Keep away from children and animals.
Children and pets should be supervised to ensure they are kept away from the
work area. Never use hand tools as power tool accessories. You should never
combine the use of a power tool with a manual tool unless specified as doing
so can cause serious personal injury. Do not use the tool for anything other
than its intended use.
Always secure your workpiece. Smaller workpieces should be secured using a
vice or clamp during use.
WORK AREA SAFETY Keep your work area clean and well-lit. Cluttered or
dark areas invite accidents. Do not use tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust. The use of some tools
can create sparks that may ignite dust or fumes.
Keep children, pets, and bystanders away whilst using the tool. Distractions
can cause you to lose control. Shut off any live electrical equipment around
your work area before commencing work with any non-insulated tool. Only use
insulated tools and tools with appropriate IEC/VDE working on live electrical
applications.
BEFORE USE Do not use hand tools whilst you are tired or under the
influence of drugs, alcohol, or medication. A moment of inattention whilst
using tools may result in serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid safety shoes, hard hat, safety
gloves, or hearing protection used for appropriate conditions will reduce the
risk of personal injury. Dress appropriately. Do not wear loose clothing or
jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose-
fitting clothes, jewelry, or long hair can become caught in moving parts. It
is recommended to fully sharpen tools before first use (where applicable).
Become familiar with the tool. Practice the use of the tool on scrap material
until you are familiar with the correct handling, use, and limitations of the
tool. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. The use
of these devices can reduce dust-related hazards.
IMPORTANT SAFETY INFORMATION FOR USE Uses the tool, accessories, and tool
bits in accordance with these instructions and in the manner intended for the
particular type of tool, taking into account the working conditions and the
work to be performed. Use of the tool for operations different from those
intended could result in a hazardous situation.
Stay alert, watch what you are doing, and use common sense when using the
tool.
Beware of sharp edges. Handle sharp-edged and pointed tools with care. Ensure
sharp-edged and pointed tools are kept sharp as this will make them easier to
control.
Always cut away from yourself when using cutting or sharp-edged tools.
Always carry sharp-edged and pointed tools by your side with the point and
heavy ends pointing downwards.
Do not force the tool. Always use the correct tool for your application. The
correct tool will do the job better and more safely at the rate at which it
was designed.
Do not overreach. Keep proper footing and balance at all times. This will
enable better control of the tool in unexpected situations.
Always use the correct type of tool for the type of material being worked on.
NOTE The above list is non-exhaustive and is recommended as a basic level
of protection for general tasks. Before starting any task, refer to your local
hardware store or a professional for advice on which safety equipment would be
best suited to the task at hand.
DISPOSAL INFORMATION Please recycle where facilities exist. Check with
your local authority for recycling advice.
CUSTOMER SERVICE If you are having difficulty using this product and
require support, please contact
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
WARRANTY To register your product and find out if you qualify for a free
extended warranty please go to
www.vonhaus.com/warranty. Please retain a
proof of purchase receipt or statement as proof of the purchase date. The
warranty only applies if the product is used solely in the manner indicated in
the warnings page of this manual, and all other instructions have been
followed accurately. Any abuse of the product or the manner in which it is
used will invalidate the warranty. Returned goods will not be accepted unless
re-packaged in their original packaging and accompanied by a relevant and
completed returns form. This does not affect your statutory rights. No rights
are given under this warranty to a person acquiring the appliance second-hand
or for commercial or communal use.
COPYRIGHT All material in this instruction manual is copyrighted by DOMU
Brands. Any unauthorized use may violate worldwide copyright, trademark, and
other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
at
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>