Rockville RWSG4B Universal Marine/Boat Receiver Splash-Complete Features/Instruction Guide
- June 5, 2024
- RockVille
Table of Contents
Rockville RWSG4B Universal Marine/Boat Receiver Splash
Specifications
- DIMENSIONS : 5″ W x 4.5″ H x 1.92″ Depth
- WEIGHT : 1 pound
- COLOR: Black
- BRAND: Rockville
Introduction
Rockville provides a wide variety of top-quality products that have gone through extensive testing before arriving at your place. The RWSG4B is a universal marine or boat receiver protective and housing case. This case is a splash-free case which means it has the ability to guard the receiver from water splashes or other harmful environmental conditions. The case is made of high-quality material and comes in an all-black color. The marine/boat receiver is protected from sea spray and wind by this universal shelter. It guarantees that the receiver is fully protected and is not harmed by the harsh weather conditions outside.
The stereo cover is made with a sturdy stainless steel mounting system that offers enough stiffness. The cover is constructed of a high-quality, heavy- duty material.
It is designed to accommodate the single din stereos. It features a flip open door that is loaded with a simple spring design.
What’s in the Box?
- Rockville RWSG4B Case x 1
- Rockville Die Cut x 1
- User Manual x 1
- Rockville Warranty x 1
How to use the Rockville RWSG4B Case?
The housing case is simple to use. Simply open the easy flip to open the door of the case. Place the receiver and then close the door.
FREQUENTLY ASKED QUESTION
-
Do I have to cut my radio DIN hole larger to use this item?
No, if your radio is a single din radio, it will fit perfectly in the Rockville Universal Marine housing case. -
Does this flip up or fold back into housing
The flip folds back into the housing. -
what size opening do you have to have for this to fit in?
The opening size required is about 8 3/4” x 3 ¼”. However, you will require an additional 3/8” of space allowing some space for the door to open easily. -
When cutting this in tl 1/8″ aluminum or 5/8″ plywood, does my single din unit require any additional internal support to hold the weight?
It doesn’t require any additional internal support to hold the weight. -
Does the radio actually mount to this product or is a separate radio mount needed?
The radio can be attached in the front. -
When cutting this in tl 1/8″ aluminum or 5/8″ plywood, does my single din unit require any additional internal support to hold the weight?
When I used it in my boat’s dashboard, I did not have to use any additional support for a Clarion stereo unit. Good fit and finish. Replaced the original. -
Do I have to cut my radio DIN hole larger to use this item?
Noa single din radio fits perfectly. -
How is the cover mounted to the dash?
The radio fits inside the mount. The mount is screwed into the dash. The outer cover then snaps onto the mount. This covers screws, and face cover can pull down to cover radio -
What are the dimensions of the hole?
I don’t know. It was the standard opening from a prior radio, removal. -
Can the lid/cover stay in the up/open position?
Yes it can
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>