BLAUPUNKT HDD401 Hair Dryer Owner’s Manual
- June 5, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT HDD401 Hair Dryer
IMPORTANT NOTES
-
Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
-
This device is for domestic use only. Do not use for any other purposes.
-
The device should only be connected to an socket with values corresponding to the values on the rating label.
-
It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
-
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards. Do not let cord hang over edge of counter, or touch any hot surface.
-
The device is not designed to be controlled via an external timer, separate remote supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
-
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
-
Never use the product close to combustibles.
-
Never expose the product to atmospheric conditions such as direct sun light or rain, etc. .. Never use the product in humid conditions (like bathroom or camping house).
-
The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be fixed
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.
-
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
-
@Warning! Do not use this
In order to provide additional protection, it is recommended to install residue
current device (RCD) in the power circuit, with residual current rating no more than 30 mA. Contact professional electrician in this matter. -
Do not immerse the unit in water and do not allow device to get wet. In case of falling down into water unplug immediately. Do not put hands into water if device is plugged in. Before next use, the appliance should be checked by qualified electrician.
-
Do not touch the appliance with wet hands.
-
Do not wrap the cord around the appliance.
-
Do not direct hot air toward the eyes or other sensitive areas.
-
Regularly remove dirt from the inlet filter.
-
Do not place or insert any metal objects into the exhaust grille or the inlet filter.
-
Do not block the airflow by covering the inlet filter or blower grille.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box), polystyrene
foam (buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment. Your
products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
TECHNICAL DATA
- Power: 1400-1600W
- Power supply: 220-240V~50/60Hz
- Concentrator nozzle
- Folding handle
- Inlet filter
- Power switch
OPERATION
Connect the power cord to the the power supply. Set the desired heat and airflow level using the switch (4): 0-0ff (*) – Cool shot
- Lower heat and airflow level
- Higher heat and airflow level
After the completion of drying hair, disconnect the device from the power by removing the plug from the socket.
CLEANING AND MAINTENANCE
Before cleaning, make sure that the dryer has been disconnected from the power
supply.
The hair dryer housing may be wiped with a slightly damp cloth, then it should
be immediately wiped dry. Do not allow water to enter into the hair dryer.
It is recommended that dirt be removed from the inlet filter regularly as it
can block airflow.