sauermann C 310 Temperature Measuring Instrument User Guide
- June 5, 2024
- sauermann
Table of Contents
Sauermann® C 310 Temperature Measuring Instrument User Guide
General Features
Features of the Housing
Symbols Used
For your safety and in order to avoid any damage of the device, please follow the procedure described in this document and read carefully the notes preceded by the following symbol:
The following symbol will also be used in this document, please read carefully the information notes indicated after this symbol:
Connections
- SPI-2 board (optional)
- Solenoid valve
- LCC-S software connection
- Autozero
- Ethernet board (optional)
- Relays board (b) (optional)
- RS 485 connection (d) (optional)
- Analogue outputs (a) (OUT3 and OUT4 are optional)
- Power supply terminal block (c)
- Type of power supply of the transmitter
- Pressure connection (optional)
- Probes connection
- Cable glands
Electrical Connections as per NFC15-100 Standard
This connection must be made by a formed and qualified technician. Whilst making the connection, the transmitter must not be energized. The presence of a switch or a circuit breaker upstream the device is compulsory.
Configuration
Class 310 transmitters allows you to set all the parameters managed by the transmitter: units, measuring ranges, alarms, outputs, channels… via the different methods shown below:
- Via keypad, only on models with display. A code-locking system for keypad guarantees the security of the installation. See configuration manual.
- Via software (optional): simple and user-friendly. See LCC-S user manual.
- Via Modbus (optional): configuration of all parameters from your PC.
- Via Ethernet (optional): configuration of all parameters from your PC.
Mounting
To install the transmitter on a wall, fix the stainless steel plate to the wall (drilling: Ø8 mm, screws and wall-plugs supplied). Insert the transmitter on the plate (see A on the drawing below) by aligning it at 30°. Rotate the housing in clockwise direction until you heard a “click” which confirms that the transmitter is correctly installed. Open the housing, lock the clamping system of the housing on the plate with the screw (see photo below). To remove the transmitter from the fixing plate, do not forget to remove this screw.
Accessories
Please refer to the data sheet to get more information about available accessories.
Maintenance: please avoid any aggressive solvents. Please protect the transmitter and its probes from any cleaning product containing formalin, that may be used for cleaning rooms or ducts.
Precautions for use: please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
Download the LCC-S software user manual
Download the C 310 data sheet
Customer service portal
Use our Customer service portal to contact us
https://sauermann-en.custhelp.com/
QSG – C310 – 09/03/2022 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>