SUNSKY A11T3 4G Rugged Industrial Tablet Instructions

: June 5, 2024
: sunsky

A11T3 4G Rugged Industrial Tablet
Instructions Manual
Version 1.0

Abstract

Thank you very much for buying our three-proof tablet computer. This introduction includes module introduction, maintenance, fire prevention, and so on. Make sure you can use our three-proof tablet correctly

Attention:

In the continuous improvement of the product, please allow us to continuously improve the specification
In order to ensure the accuracy of the manual, if you send any mistakes, please inform us in time for improvement.
Please do not copy or copy our instructions without permission.

Conclusion

This three-proof tablet is widely used in many industries, including manufacturing, transportation, service, inspection, and so on.
Users can use a two-dimensional one-dimensional scanning head, and then through the wired network, WIFI, Bluetooth, and another wireless communication mode for the transmission. More parts can be customized, with IP67 design, which actually supporting the use of the IP65-66 environment. Adaptability is more extensive. Is your work right-hand helper!

The standard accessories

The following are the standard accessories

The charger
Hand-tied with
Portable belt

Safety tips

For safe and effective use of our products, please read the content!

Please do not approach an extremely precise instrument!
Please do not clean equipment with strongly corrosive chemicals!
Please do not litter the waste battery, please throw the waste battery in the recycle bin!
Please do not use this device at high or extremely low temperatures!
Please do not expose equipment to strong shock or impact.
When you first use this device, charge the battery once!
Please do not disassemble this equipment privately. If there is a need to repair the equipment, please return it to the original factory for repair, or contact professional personnel to repair it.
Please use our standard charger. We will not be responsible for any damage caused by using a third-party charger.
This product is in line with the daily life grade A radiation standard
Please access the Internet using the device and the spectrum covered!

Overall operating standards and precautions

Operating standards

Structures and Functions

At the top of the function

power
Volume+ –
barcode windows
P-KEY, H-KEY
F-key

Front function

light sensor
front camera
LCD and touch panel

Interface

Micro USB
USB 2.0
DC charge
earphone
Ethernet RJ45
UART RS232

Bottompogo pin and the Base positioning hole **Pogopindefine

** Back Function introduction

hand strap screw
back pogo pin
speaker
fingerprint
back camera
label
battery cover

Back pogo pin define

Precautions for battery use

Battery performance

Standby time is affected by the use of the system environment, testing, photography, and other functions.
A bright screen on a phone call can also affect standby time.
Use the machine in a non-signal area, more likely to consume power!
The temperature environment, operating status, and signal environment of the battery will affect the charging status

| 10500mAh(standby)
---|---
standby| About67
Talk time| About 8 hours

Using the environment and network system also affects standby time
Charge
This device only supports the original charger and base charging, the USB port does not support charging!
When the device is in charge time, the power indicator will be steady on or flashing
After charging, please remove the charger in time. If the charger is connected for a long time, the service life of the battery will be affected.
Charging time
When the AC voltage is very low, the charging time is very long
Charging time is approximately 4 hours (depending on the state of the device)
The normal charging temperature ranges from 0 °C to 40 °C. When the temperature exceeds 0 °C to 40 °C, the service life of the battery is shortened.
Using non-standard chargers can prolong charging time and damage the stability of the tablet.
Using a non-standard charger to charge, will affect the operation experience!
Attention:

When using the tablet for the first time, please fully charge the battery before using it. When you connect the charger for a long time, the battery life will be affected.
Remove the charger when you do not want to charge it
When the tablet is out of power for a long time, when the charger is just connected, it will not show the charging status immediately. Only after the charger is connected, the device will show the charging status.
The charger is a safe device, please be careful when using it!

The main parameters

LCD 10” 1920*1200 capacitance 400 to 500nit visible under the sunlight
Android 11 operating system
The charger5V 3AMAX 15W.
Headphone jack3.5mm
Support for one-dimensional scanning (optional)
Support the RFID 13.56MHz
Rear Camera 13M.0M ¾ Support flash LED
Size: 27517818mm
weight: 950g (without fingerprint function)
Support 10 points touch
Support Beidou+GPS+glonass
Support Proximity Sensor and Geomagnetism sensor
Support multi-language
Back 16pin pogopin include 1USB, 1 RS232 1 UART 3.3V, 5V) and bottom 8pin (1USB,1RS232,1UART,5V)

Specifications and Functions

NFC (optional)

Working frequency band:13.56MHZ
Support agreement: Support ISO/IEC 15693, ISO/IEC 14443A profile
Supported formats: SR176, SRIX4K (TYPE-B), I- Code2, TI RFID label-it HF-I, EM4034, Mifare Classic ETC
Read distance: 0-3cm

One-dimensional scanning (optional)

Scanning mode: CCD
pixel: 5mil
Scanning speed: 104 times per second
scanning distance: 2.5cm-114.3cm
light source: Visible laser
Identify the type: 1D
Read speed: 104 times/second+12 times/second(optional)
Read distance: 2.5cm-114.3cm
Scanning Angle: 47±3°(default) /35±3°(reduced code)

Two-dimensional scanning (optional)

Identify the type: 1D, 2D, OCR
Image sensor: 752*480 CMOS
Scanning accuracy: 5 mil
Scanning Angle: rotate 360°, incline±50°, deflection ±50°
Identify areas: Horizontal 36°, vertical 23°
The depth of field 4cm-23.5cm\

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
ISED Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirements. This equipment should be installed and operated with a minimum distance of 0mm between the radiator & your body.