sauermann ATE 310 Multi-Channels Displayer User Guide
- June 5, 2024
- sauermann
Table of Contents
sauermann ATE 310 Multi-Channels Displayer
Flush-mount multiparameter display
- Alternating display of 1 to 3 parameters
- 3 analogue inputs 0-5/10 V or 0/4-20 mA
- 3 audible and visual alarms
- Digital RS485 ModBus RTU input
General features
Features of the housing
- Front face Brushed stainless steel 316 L
- Back housing Flush-mount in stainless steel 304 L
- Protection IP65 in front face
- Weight 585 g
Innovations
Connection to a computer in front face
Dimensions
Connections
Electrical connections as per NFC15-100 standard
Only a trained and qualified technician can realise this operation. To realise
this connection, the device must NOT BE SUPPLIED
Transmitters configuration
Class 310 transmitters allows you to set all the parameters managed by the device: units, measuring ranges, alarms, outputs, channels… via the different methods shown below:
- Via keyboard: a code-locking system for keypad guarantees the security of the installation. See configuration manual.
- Via software (option): simple and user-friendly. See LCC-S software manual.
Mounting
To install a transmitter on a wall, make a cutting in the wall of size 198 x 72 mm. Then drill 4 holes around the cutting as shown beside. Insert the transmitter into the wall and fix it with the 4 screws supplied.
Accessories
Please refer to the data sheet to get more information about available accessories.
Maintenance
please avoid any aggressive solvents. Please protect the transmitter and its probes from any cleaning product containing formalin, that may be used for cleaning rooms or ducts.
Precautions for use: please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>