YMOO RT5302 Original Voice Amplifier User Manual

June 5, 2024
YMOO

YMOO RT5302 Original Voice Amplifier User Manual
YMOO RT5302 Original Voice Amplifier

In the Box

In the Box
In the Box

Product overview

Product overview

Control Functions

  1. Power switch & volume control
    Rotate the knob to the “ON” direction to turn the amplifier on and there will be a voice prompt.
    Indicator light flashes blue.
    Rotate to the “OFF” direction to turn it off.
    Rotate the knob to adjust the volume.

  2. 3.5mm Microphone Jack
    When plugged in wired microphones, other functions can not work, such as TF card playing, USB flash drive playing, wireless microphones function. And to avoid howling, please do not put the microphone toward the speaker.

  3. M Button
    Short press the M button to select mode (USB, TF, wireless microphones).

  4. Previous
    Short press to play the previous song. Long press to fast backward (the indicator blinks blue quickly).

  5. Play/Pause
    Short press to pause or play music. Press and hold until the indicator light flashes blue rapidly to enter single repeat playback mode. Press and hold until the indicator remains solid blue to exit single loop mode.

  6. Next
    Short press to play the next song. Long press to fast forward (the indicator blinks blue quickly).

  7. Indicator
    Blue light: always on after power on. (Blue light flashes slowly: wireless microphone can be connected) Red light: always on when charging, and off when fully charged.

  8. Type-C USB(DC 5V)
    Use DC 5V power adapter and Type-C USB power cable to charge the PA system. Note: Please use the Type-C USB power cable provided inside the package with DC 5V power adapter (1A-1.5A) to charge .

  9. Battery Level
    Show battery level (press any button to know current battery level)
    Battery level

  10. Clip

  11. USB
    Insert U flash drive to play songs. (compatible with most brands)

  12. TF card
    Insert TF card to play songs. (compatible with most brands)

Wireless microphone connection method

STEP 1

Wireless microphone connection method

STEP 2

Wireless microphone connection method

ENJOY

Wireless microphone connection method

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal

Always dispose of the used appliance at a recycling centre Do not dispose the used appliance together with household waste.

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference. Changes or modifications not expressly approved by lMii Ltd.
    will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
  • Consult the manufacturer or an experienced radio/TV technician for help.

This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

CE

1Mii Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following Internet address: www.lmii.com

In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.

Shenzhen 1Mii Technologies Limited
Baoan District, Shenzhen 518100 China

EU Importer:
eVatmaster Consulting GmbH
Bettina. 30,60325 Frankfurt am Main, Germany

eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmastercom

Scan the code to get more information

Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist., Shenzhen, China
Operator: ShenZhen 1Mii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, China

We hope you never have the need, but if you do, our service is friendly and hassle-free.
support-ymoo@1 mii.com
web: www.lmii.com

FCC ID: 2A6ET -RT5302

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals