YMOO B06T3 Wireless Audio Adapter User Manual
- June 14, 2024
- YMOO
Table of Contents
YMOO B06T3 Wireless Audio Adapter
Wireless Audio Adapter
User Manual
ln the box
Product overview
Basic operation
Pair and connect
- Put BD6T3 with your phone as close as possible.
- Press the button for l seconds.while LED light flashing between red and blue.BD6T3 is in pair mode.
- Activate the Bluetooth of the mobile phone/computer/tablet. click ‘B06T3″ to connect. and wait for the pairing to succeed.
- Plug the B06T3 to your speaker or soundbar or amplifier through audio cable packed in box.
How to enter pairing mode?
Press the button for I seconds. while LED light flashing between red and blue.
B06T3 with enter into pair mode.
How to pair the second device?
- Set BD6T3 to pairing mode again (press and hold the button for 2 seconds until the LED flashes red and blue).
- Activate the Bluetooth of the second mobile phone. find ‘BD6T3’, click connect. and wait for the pairing to succeed.
- Atter successfully paired with the second device, the first device will be disconnected. You need to manually click the “B06T3” in the Bluetooth list of the first device to reconnect than B06T3 pair with the two devices at the same time.
Note: You can only play music on one device at a time. so if you want to play music on the second device, you need to pause the music on the first device before playing it on the second device.
Reset device
If the receiver cannot be paired or work properly, please do the following
method to reset the device:
Press and hold the button for ID seconds until the light flash purple quickly
about 3 times.That means the device has been reset.
In accordance with Article 1□(2) and Article 10(1□). this product is allowed to be used in all EU member states.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs. and adjustments not approved by the company, damages from misuse. inattention or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliances at the recycling centre.
e Vatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
[email protected]
Operator: Ankbit International Limited
Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St.,
Baoan Dist., Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
- [email protected]
my web: www.ymoox.com
FCC ID: 2AUFR-RT5014