SCOSCHE MagicMount Elite2 Dash Magnetic Mount User Manual
- June 11, 2024
- Scosche
Table of Contents
SCOSCHE MagicMount Elite2 Dash Magnetic Mount
INCLUDED ELEMENTS
- A. Magnetic Phone Mount
- B. Low-Profile Dash Mount
- C. Optional Mounting Base with Fl ex Tabs (optimal for mounting to curved surfaces)
- D. Replacement Adhesive
- E. Cleaning Wipe
- F. MagicRing™Adapter
- G. Mounting Template for MagicRing™
DEVICE SETUP
- SECTION A- iPhone® 12 or Later (with or without optional MagSafe™ case)
- SECTION B- MagicRing Adapter (for installation on non-MagSafe™ devices)
- SECTION C- Low-Profile Dash Mount
- SECTION D- Optional Mounting Base
- SECTION E- Adjustable Ball Joint/ Replacement Adhesive
- SECTION F- Removing Adhesive Mounting Parts
Product Using Instruction
SECTION A
- A. iPhone 12 or Later (with optional MagSafe case) If using a case, it must be a MagSafe case (not included) for MagicMount Elite2 to function properly. Note: MagicRing adapter not required .
- MagSafe Case
- B. iPhone 12 or Later (without case)
- Note: MagicRing Adapter not required.
SECTION B
- MagicRing Adapter (for I stand lation on Non-MagSafe™ Devices*)
- Use the included tern plate to accurately position MagicRing on the device.
- Case required. Manufacturing materials do not allow adhesives to bond directly to the device.
SECTION C
- Low-Profile Dash Mount
- Note: Use the included wipe* to clean the surface before placing the mount. Remove the backing from the bottom of the mount (A) and place the mount in position (B).
- Supplied cleaning wipes may cause discolouration of certain plastics, types of vinyl and painted surfaces. It is recommended to test in an inconspicuous area first.
SECTION D
- Optional Mounting Base
- Note: Use the included wipe* to clean the surface prior to placing the mount.
- Remove the backing from the bottom of the low-profile mount (A) and place the low-profile mount in the mounting base (B).
- Remove the backing from the bottom of the mounting base (C) and place the mounting base in position (D).
- Supplied cleaning wipes may cause discolouration of certain plastics, vinyl and painted surfaces. It is recommended to test in an inconspicuous area first.
SECTION E
- Adjustable Ball Joint
- Replacement Adhesive
SECTION F
- Removing Adhesive Mounting Parts (Dash Mount & MagicRing).
- Use a thin plastic card to carefully lift the dash mount or MagicRing from the mounting surface. Slowly lift and remove the mount or MagicRing.
MagicMount Elite2
CONTACT
- Scosche Industries
- 1550 Pacific Avenue
- Oxnard, California 93033
- Phone: 800-363-4490 x1 / 805-486-4450 x1
- www.scosche.com
- ©2023 Scosche Industries
- Scosche, MagicMount & MagicRing are all trademarks of Scosche Industries.
- Other marks or brands are the property of their respective owners.
- Devices and or appearance may vary.
- Designed in Oxnard, California
- SI MEMSD 4/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>