CASTLENET EBM552U Mesh Wi-Fi Router Installation Guide
- June 6, 2024
- CastleNet
Table of Contents
- Package Contents
- A quick look at EBM552U
- LED Indicators
- Positioning your EBM552U
- Setting up your EBM552U
- Connecting to the device
- Accessing the Web Management
- Setting up your Mesh system
- Adding agent to your Mesh Wi-Fi system
- Accessing the App Management
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Quick Installation Guide
For EBM552U Mesh Wi-Fi Router
Package Contents
A quick look at EBM552U
Press and hold 5 sec(s)
Set device to default status. Release when LED indicator becomes solid amber.
Press and hold 10sec(s)
Switch devise between Controller and Agent mode. Release when LED indicator
become flash red and green.
LED Indicators
There are two LEDs located on the front panel, providing status information to the user.
Positioning your EBM552U
Please rotate the stand at the bottom of the device to stabilize.
Setting up your EBM552U
This chapter describes the proper steps for connecting your Mesh Wi-Fi router.
Please be sure to follow the steps below.
Step a: Using RJ-45 cable to connect your modem’s LAN port to your
device’s WAN port.
Step b: Before plugging the AC adapter to both Cable Modem and Mesh Wi-
Fi, the sequence of plugging will be Mesh Wi-Fi and then Cable Modem. Please
do follow the sequence.
Connecting to the device
There is a label pasted to the bottom of EBM552U. In that label, you can
obtain Wi-Fi access information. Please note, the following label is just an
example, each EBM552U has its own label and setting value. Please follow your
label information to access your EBM552U Mesh Wi-Fi system.
You can access the network either by the following methods.
a. Scan QR code on the controller using your cellphone then will instantly
connect to the network.
b. Go to the Wi-Fi network setting on your cellphone, select the network
name(SSID), and enter the password.
EBM552U
S/N: RD0xxxxxxxx
MAC: FC4AE9596xxx
SSID: EBM552_60fc
PSK: xxxxxxxxxxxxxxxx
EBM552_60fc WPA 12345678 false
Accessing the Web Management
For easy-changing the default settings, a Web-based GUI is built-in for your
access.
Use the following procedures to login to your EBM552U.
a. Open your web browser, launch the Web GUI address,
http://router.castlenet
b. Then type the Username/Password: admin/admin and press Enter.
Setting up your Mesh system
Download the router App to manage your Wi-Fi Mesh home network to find the app, scan the QR code on the right side or search for CastleNet Mesh in the Google Play Store or the Apple App Store. Launch the CastleNet Mesh app on your cell phone and follow the instructions step by step.
https://play.google.com/store/apps/details?id=com.castlenet.app&hl=zh_TW
https://apps.apple.com/tw/app/castlenet-wi-fi-mesh/id1533370746
a. Connect to the device by Wi-Fi, then open the App.
b. Enter your device login name and password.
Default login name and password is admin/admin.
c. Change your Wi-Fi default SSID and password, then restart the APP.
Adding agent to your Mesh Wi-Fi system
a. Power ON another device. Wait for a moment, press “Next” when the Status
LED becomes solid red.
b. Press the “Sync” button on both controller and agent device.
c. On boarding process may take up several minutes, please wait a moment.
d. Congratulations. You may add another agent to the Mesh Wi-Fi system or go
to the main page.
Accessing the App Management
Now you can see your Wi-Fi environment information on the app, also configure advanced functions, such as guest network, parental control, QoS, and monitor current traffic flow.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator & your body.
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC Statement
This device complies with Class B Part 15 of the FCC Rules. The device
generates, uses, and can radiate radio frequency energy and, if not installed
and used as instructed, may cause harmful interference to radio communication.
Only Coaxial cables are to be used with this device in order to ensure
compliance with FCC emissions limits. Accessories connected to this device by
the user must comply with FCC Class B limits. The manufacturer is not
responsible for any interference which results from the use of improper
cables, or which results from unauthorized changes or modifications to the
device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment with IC radiation exposure limits set forth for an uncontrolled
environment. To maintain compliance with IC RF exposure compliance
requirements, please follow operation instructions as documented in this
manual.
Warranty
Items sold by manufacturer/distributor/agent, hereinafter called “Seller”, are
warranted only as follows: Except as noted below Seller will correct, either
by repair or replacement at its option, any defect of material or workmanship
which develops within one year after delivery of the item to the original
Buyer provided that evaluation and inspection by Seller disclose that such
defect developed under normal and proper use. Repaired or replaced items will
be further warranted for the unexpired term of their original warranty. All
items claimed defective must be returned to Seller, transportation charges
prepaid and will be returned to the Buyer with transportation charges collect
unless evaluation proves the item to be defective and that the Seller is
responsible for the defect. In that case, the Seller will return to Buyer with
the transportation charge prepaid. Seller may elect to evaluate and repair
defective items at the Buyer’s site.
Seller may charge Buyer a fee (including travel expenses, if needed) to cover the cost of evaluation if the evaluation shows that the items are not defective or that they are defective for reasons beyond the scope of this warranty. The Seller makes no warranty concerning components or accessories not manufactured by it. However, in the event of failure of such a part, Seller will give reasonable assistance to Buyer in obtaining from the manufacturer whatever adjustment is reasonable in light of the manufacturer’s own warranty. Seller will not assume expense or liability for repairs made outside the factory by other than Seller’s employees without Seller’s written consent.
SELLER IS NOT RESPONSIBLE FOR DAMAGE TO ANY ASSOCIATED EQUIPMENT, NOR WILL SELLER BE HELD LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE IMPLIED WARRANTY OF “MERCHANTABILITY” AND “FITNESS FOR PARTICULAR PURPOSE.”
Trademarks
All trademarks are the property of their respective owners.
This document is subject to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>