THRUSTMASTER B01M1L2NRL T300 RS GT Racing Wheel For PS4 and PC User Manual

: June 5, 2024
: THRUSTMASTER

Table of Contents

THRUSTMASTER B01M1L2NRL T300 RS GT Racing Wheel For PS4 and PC
TECHNICAL FEATURES
INSTALLING THE RACING WHEEL ON ITS BASE
ENVIRONMENTAL PROTECTION RECOMMENDATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

THRUSTMASTER B01M1L2NRL T300 RS GT Racing Wheel For PS4 and PC

TECHNICAL FEATURES

T300 RS base
PS wheel
sequential paddle shifters (Up & Down) 4 Directional buttons
PS4™ or PS3™ USB sliding switch
MODE button + red/green indicator light
SELECT/START buttons on PS3™ and
ARE/OPTIONS on PS4™
PS button
Large threaded hole (for attachment system and fastening screw)
Attachment system
Metal fastening screw
Thrustmaster Quick Release
L3/R3 buttons
Power supply connector (type A or B) (varies from one country to another)
Racing wheel USB cable and connector
Shifter (gearbox) connector (sold separately)
Pedal set connector

PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET:

PLEASE READ BEFORE PROCEEDING!
Your racing wheel’s power supply varies according to the country where you purchased your device. The power supply can be:

Internal, with:

a power supply unit located directly inside the racing wheel’s base, with a type A connector.
a 220-240 V power supply cable.
compatible only with 220-240 V electrical power.
Never connect the 220-240 V cable to a 100-130 V electrical outlet!!! Never connect this cable to a power adapter!!!

Internal, with:

a power supply unit located directly inside the racing wheel’s base, with a type-A connector.
a 100-125 V power supply cable.
compatible only with 100-125 V electrical power.
Never connect the 100-125 V cable to a 220-240 V electrical outlet!!! Never connect this cable to a power adapter!!!

IMPORTANT:
if you do not know which voltage is supplied in the area in which you are using your racing wheel, please ask your local electricity supplier.

External, with:

an external power supply unit, with a type B connector.
a power supply cable.
compatible with all electrical voltages, from 110-240 V.

WARNINGS
Before using this product, please read this manual carefully and save it for later reference.

Warning – Electrical shock

Keep the product in a dry location and do not expose it to dust or sunlight.
Do not twist or pull on the connectors and cables.
Do not spill any liquid on the product or its connectors.
Do not short-circuit the product.
Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.
Do not use a power supply cable other than the one provided with your racing wheel.
Do not use the power supply cable if the cable or its connectors are damaged, split or broken.
Make sure that the power supply cable is properly plugged into an electrical outlet, and properly connected to the connector at the rear of the racing wheel’s base.
Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be carried out by the manufacturer, its authorized representative or a qualified technician.
Only use attachment systems/accessories specified by the manufacturer.
If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odors), stop using it immediately, unplug the power supply cable from the electrical outlet and disconnect the other cables.
If you will not be using the racing wheel for an extended period of time, unplug its power supply cable from the electrical outlet.

Air vents
Make sure not to block any of the air vents on the racing wheel’s base. For optimal ventilation, make sure to do the following:

Position the wheel’s base at least 10 cm away from any wall surfaces.
Do not place the base in any tight spaces.
Do not cover the base.
Do not let any dust build up on the air vents.

For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet.

THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

Warning – Injuries due to Force Feedback and repeated movements
Playing with a Force Feedback racing wheel may cause muscle or joint pain. To avoid any problems:

Avoid lengthy gaming periods.
Take 10 to 15-minute breaks after each hour of play.
If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and rest for a few hours before you start playing again.

Warning – Injuries due to Force Feedback and repeated movements (continued)

If the symptoms or pain indicated above persist when you start playing again, stop playing and consult your doctor.
Keep out of children’s reach.
During gameplay, always leave both hands correctly positioned on the wheel without letting it go completely.
During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
During calibration and gameplay, never place your hand or your arm through the openings in the racing wheel.
Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.
Product to be handled only by users 16 years of age or older
Be careful not to drop the product on yourself or on anyone else!

Warning – Pedal set pinch hazard when playing

Keep the pedal set out of children’s reach.
During gameplay, never place your fingers on or anywhere near the sides of the pedals.
During gameplay, never place your fingers on or anywhere near the pedals’ rear base.
During gameplay, never place your fingers on or anywhere near the pedals’ front base.

Warning – Pedal set pinch hazard when not playing

Store the pedal set in a safe place, and keep it out of children’s reach.

UPDATING YOUR RACING WHEEL’S FIRMWARE
The firmware included in your racing wheel’s base can be updated to a more recent version featuring product enhancements. To display the firmware version that your racing wheel is currently using and update it if required: on PC, visit http://support.thrustmaster.com. Click Racing Wheels / T300 RS, then select Firmware and follow the instructions describing the download and installation procedure.

INSTALLING THE RACING WHEEL ON ITS BASE

Align the connector positions using the arrows:

Base (1) connector: Arrow pointing upwards
Racing wheel (2) connector: Arrow pointing upwards
Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device’s ring counterclockwise, while holding the racing wheel (2) in position. Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel clockwise.
Once you have installed the racing wheel, rotate it 180° (when facing the wheel, the PlayStation® logo should be upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release (12) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive force), turning it clockwise.

ADJUSTING THE PEDALS’ HEIGHT AND SPACING
Using a Phillips screwdriver (not included), remove the 2 attachment screws holding the pedal heads to the pedal arms. Next, adjust the pedal heads’ height and spacing to suit your preferred driving style:

6 different positions are available for the gas pedal.
6 different positions are available for the brake pedal.

Once you are happy with the height and spacing, replace and re-tighten the 2 attachment screws holding the pedal heads to the pedal arms.

ATTACHING THE RACING WHEEL
Attaching the racing wheel to a table or a desktop

Place the racing wheel on a table or any other horizontal, flat and stable surface.
Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the racing wheel, until the wheel is perfectly stable.

WARNING:
Never tighten the screw alone, without the attachment system in place! (This could damage the racing wheel.)

MONTAGE / DEMONTAGE	SENS

Pour serrer :

Vissez

dans le sens inverse des aiguilles d’une montre

|

Pour desserrer :

Dévissez dans le sens

des aiguilles d’une montre

| ****

Attaching the racing wheel’s base to a cockpit

Place the racing wheel’s base on the cockpit shelf.
Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small screw threads located on the underside of the racing wheel.
Important:
The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm; longer screws could cause damage to internal components located in the racing wheel’s base.
If required, tighten the standard attachment system by inserting the fastening screw in the large threaded hole.

Attaching the pedal set to a cockpit

Attach the pedal set using the small screw threads located on its underside.
Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small screw threads located on the underside of the pedal set.
Important:
The length of the two M6 screws must not exceed the thickness of the shelf + 10 mm; longer screws could cause damage to internal components located in the pedal set.

PLAYSTATION®3 AND PLAYSTATION®4 MAPPING

SETTING UP THE RACING WHEEL FOR PLAYSTATION®3 OR PLAYSTATION®4′

Connect the pedal set to the connector (17) located at the back of the racing wheel’s base.
Connect the power supply cable to the connector (14) located at the back of the racing wheel’s base.
Plug the power supply cable into an electrical outlet with the same voltage specifications.
Set the USB sliding switch (5) on the racing wheel’s base to either the PS3™ or PS4™ position, depending on the console or the game you are using.
Connect the racing wheel’s USB connector (15) to one of the console’s USB ports.
Once your console is powered on, your racing wheel will calibrate itself automatically.
On PlayStation®4 (when the USB sliding switch is set to the PS4™ position): press the racing wheel’s PS button (8) and sign in to your Sony Entertainment Network account, in order to be able to use the wheel.

Important notes:

The USB sliding switch (5) on the racing wheel’s base must always be set to the proper position (PS3™ or PS4™) before connecting the wheel’s USB cable to the console. To change the sliding switch’s position, disconnect the USB cable from the console and then change the position of the switch before reconnecting the USB cable to the console.
On PlayStation®3, the USB sliding switch (5) must always be set to the PS3™ position
The wheel is recognized in most games as a T500RS wheel.
The wheel is functional in compatible games and in console menus.
The “PS” function is functional on the wheel.
On PlayStation®4, with the USB sliding switch (5) in the PS3™ position:
The wheel is recognized in most games as a T500RS wheel.
The wheel is functional in compatible games, but not in console menus.
The “SHARE” and “PS” functions are not functional on the wheel.
On PlayStation®4, with the USB sliding switch (5) in the PS4™ position
Don’t forget to press the racing wheel’s PS button (8) in order to be able to use the wheel.
The wheel is recognized in most games as a T300 RS wheel.
The wheel is functional in compatible games and in console menus.
The “SHARE” and “PS” functions are functional on the wheel.
The list of PlayStation®3 and PlayStation®4 games compatible with the T300 RS (along with the required position for the USB sliding switch (5) according to the game being played) is available at.

SETTING UP THE RACING WHEEL FOR PC
PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe. For more information, visit http://support.thrustmaster.com.

AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION
The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and connect the racing wheel’s USB connector to the console. During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080 degree angle, before stopping at the centre.

AUTOMATIC CALIBRATION OF THE PEDAL SET
Never connect the pedal set to the racing wheel’s base (or disconnect it from the base) when it is connected to the console or during gameplay (this could result in improper calibration).Always connect the pedal set before connecting the racing wheel to the console. Once the racing wheel’s calibration is complete and the game has been started, the pedals are automatically calibrated after a few presses.If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly calibrated: Power off your console and completely disconnect the racing wheel. Then reconnect all cables (including the power supply cable and the pedal set), and restart your console and your game.

INTERNAL TEMPERATURE SENSOR
The wheel’s cooling system is composed of a heat sink and a fan.

A thermostat monitors the wheel’s internal temperature.
When you are using the wheel in a game:
- The cooling fan starts up when the wheel has reached a certain temperature (after a few minutes of gameplay, depending on the strength of the Force Feedback effects used).
- The power of the Force Feedback effects automatically decreases as soon as the wheel reaches a much higher temperature level (to protect the motor). The power of these effects automatically increases as soon as the temperature slightly decreases.
When you’re done playing: due to the motor’s thermal inertia, the cooling fan continues to operate until the temperature drops below the fan’s startup level. Your wheel has been designed in this way in order to facilitate cooling, and to protect the motor (this may take from 5 to 45 minutes, depending on the temperature reached while using the wheel in a game).

MODE BUTTON AND INDICATOR LIGHT (6)
MODE button for the pedal set
The pedal set included with the T300 RS features 2 pedals. When using this pedal set, make sure that the indicator light remains red, or else the gas pedal will not function properly. The T300 RS is also compatible with Thrustmaster pedal sets featuring 3 pedals (sold separately); these allow you to electronically swap the accelerator and clutch pedals. To do so, simply press the MODE button (6) for 2 seconds. The racing wheel’s internal memory stores whether the pedals have been swapped around or not.

Other information regarding the MODE button
To learn more about the MODE button and indicator light, please visit http://support.thrustmaster.com. Click Racing Wheels / T300 RS, and then select Manual or FAQ.

HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)
Please visit http://support.thrustmaster.com. Click Racing Wheels / T300 RS, and then select Manual or FAQ.

CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product. In the countries of the European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months from the date of original purchase. Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow? If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support). Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or from the date on which the product in question is made available for reconditioning, if the date on which the product is made available for reconditioning is subsequent to the date of the request for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) in the event of failure to comply with the instructions provided by Technical Support; (3) to software, said software being subject to a specific warranty; (4) to consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example); (5) to accessories (cables, cases, pouches, bags, wrist-straps, for example); (6) if the product was sold at public auction.

This warranty is nontransferable. The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country are not affected by this warranty. Additional warranty provisions Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product. In the countries of the European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).

Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or from the date on which the product in question is made available for reconditioning, if the date on which the product is made available for reconditioning is subsequent to the date of the request for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.

This warranty shall not apply: if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); if the product has been used for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example); in the event of failure to comply with the instructions provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at public auction.
This warranty is nontransferable. The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country are not affected by this warranty.

Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and by providing the consumer with the required spare part(s), where applicable).
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period has expired.

Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries disclaim all liability for any damages caused by one or more of the following: the product has been modified, opened or altered; failure to comply with assembly instructions; inappropriate or abusive use, negligence, an accident (an impact, for example); normal wear; ) the use of the product for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or manufacturing defect with respect to the product (including, but not limited to, any damages caused directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union: At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is confirmed by the symbol found on the product, user manual or packaging. Depending on their characteristics, the materials may be recycled. Through recycling and other forms of processing Waste Electrical and Electronic Equipment, you can make a significant contribution towards helping to protect the environment. Please contact your local authorities for information on the collection point nearest you. For all other countries: Please adhere to local recycling laws for electrical and electronic equipment. Retain this information. Colors and decorations may vary. Plastic fasteners and ad.