THRUSTMASTER 4460136 TMX Force Feedback Racing Wheel User Manual
- June 4, 2024
- THRUSTMASTER
Table of Contents
THRUSTMASTER 4460136 TMX Force Feedback Racing Wheel
Install the drivers
“PC – DRIVERS FORCE FEEDBACK”:
https://support.thrustmaster.com/en/product/tmxforcefeedback-en/
During this procedure:
- DO NOT CONNECT the TMX wheel to your PC before being prompted to do so.
- The wheel must be connected directly to the computer’s USB port. We recommend that you do not use a USB hub for this procedure.
- DO NOT CLICK in any Windows dialog boxes that may appear during the update.
Restart the computer.
On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel > Control
Panel” menu, verify that your wheel appears under the name “Thrustmaster TMX
Racing Wheel”. 
On Windows 8 / 8.1 / 10
From the Start menu, start typing the words Control Panel. This will bring up
the Search function, giving you access to the Game Controller Control Panel.
It is also available under Apps > Thrustmaster:
Your wheel should appear under the name “Thrustmaster TMX Racing Wheel”.
Your wheel’s firmware version is displayed in the upper right-hand corner of
the Control Panel tabs. Firmware: 17 is currently the latest
version.
If the firmware version is earlier than 17:
On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel” menu, click on
“Firmware Update”.
On Windows 8 / 8.1 / 10
From the Start menu, start typing the words Firmware Update. This will bring
up the Search function, giving you access to the Firmware
application:
It is also available under Apps > Thrustmaster:
- The Thrustmaster TMX Racing wheel device is listed in the “Device” section. The version of the firmware currently found in the device is displayed.
- The “Firmware” section displays information regarding the version of the firmware that will be applied to the device.
When you are ready to continue, click OK.
IMPORTANT: DO NOT UNPLUG your wheel from the USB port, and DO NOT
DISCONNECT the wheel’s power supply during the firmware update procedure!
The firmware update procedure begins (the update progress is displayed onscreen). During the firmware update, the MODE LED on the wheel will be OFF: this is perfectly normal.
The update program will inform you whether the firmware has been successfully
updated
If the firm ware has been successfully updated, the wheel will automatically
calibrate itself, and the MODE LED will return to its original state:
Click OK to return to the update program’s main window, and then click on to
exit the program. 
If the firmware update procedure has failed or displays an error message,
please contact
Thrustmaster technical support, who will guide you through the entire process
to follow. Once the firmware has been successfully updated, verify that the
wheel is functioning properly in the Control Panel
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>