THRUSTMASTER T-GT II Europe Middle East Owner’s Manual

Europe, Middle East
For PlayStation® 5 consoles and PlayStation® 4 consoles
User Manual

T-GT II Europe Middle East

WARNING:
To ensure that your T-GT II racing wheel functions correctly with games,  you may be required to install the game’s automatic updates(available when your console is connected to the Internet).

TECHNICAL FEATURES

1 T-GT II base
2 T-GT II wheel
3 2 sequential paddle shifters (up & down)
4 Directional buttons
5 4 rotary selectors with Push function
6 2 mini-sticks
7 SHARE/CREATE button| 8 OPTIONS button
9 PS button
10 MODE button + red/green indicator light
11 Built-in USB sliding switch: OTHER / GT
12 Large threaded holes (for the attachment system and fastening screw)
13 Attachment system
14 Metal fastening screw
---|---

15 Thrustmaster Quick Release
16 T-DFB effects system (only compatible with
the PS5™ consoles and PS4™ consoles in GT mode)
17 Connector for T-TURBO power supply
18 Connector for removable USB cable
19 Connector for pedal set| 20 Connector for TH8A shifter (shifter sold separately)
21 T-TURBO power supply
22 Power supply cable
23 Removable USB cable
---|---

PLUGGING THE WHEEL INTO AN ELECTRICAL OUTLET: PLEASE READ CAREFULLY!
Never plug the T-TURBO power supply into an electrical outlet with a different voltage! The T-TURBO power supply’s voltage is indicated on the label located above the female connector for the power supply cable.
Never connect a power supply other than the T-TURBO power supply to the T-GT II base, even if the connector is compatible! For example, never connect the power adapter for the T500 RS wheel to the T-GT II base.
WARNING
Before using this product, please read this manual carefully and save it for later reference.
Warning – Electrical shock

• Keep the product in a dry location and do not expose it to dust or sunlight.
• Do not twist or pull on the connectors and cables.
• Do not spill any liquid on the product or its connectors.
• Do not short-circuit the product.
• Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.
• Do not use a power supply cable other than the one provided with your racing wheel.
• Do not use the power supply cable if the cable or its connectors are damaged, split or broken.
• Make sure that the power supply cable is properly plugged into an electrical outlet, and properly connected to the connector at the rear of the racing wheel’s base.
• Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be carried out by the manufacturer, its authorized representative or a qualified technician.
• Only use attachment systems/accessories specified by the manufacturer.
• If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odors), stop using it immediately, unplug the power supply cable from the electrical outlet and disconnect the other cables.
• If you will not be using the racing wheel for an extended period of time, unplug its power supply cable from the electrical outlet.
• The electrical outlet must be located near the equipment and must be easily accessible.

Information for 220V power supply adapter

GUILLEMOT CORPORATION S.A. 414 196 758 Rennes
Place du Granier
BP 97143
35571 Chantepie Cedex
France|
Model identifier| Turbo Power 220V|
Input voltage| 220 – 240| V
Input AC frequency| 50 / 60| Hz
Output voltage| 24,0| V AC
Output current| 4,0| A
Output power| 96,0| W
Average active efficiency| 90,9| %
Efficiency at low load (10 %)| 86,8| %
No-load power consumption| 0,01| _ W

Air vents
Make sure not to block any of the air vents on the racing wheel’s base. For optimal ventilation, make sure to do the following:

• Position the wheel’s base at least 10 cm away from any wall surfaces.
• Do not place the base in any tight spaces.
• Do not cover the base.
• Do not let any dust build up on the air vents.

For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet.
THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM THE USE OF THE PEDAL SET WITHOUT SHOES.
Warning – Injuries due to Force Feedback and repeated movements Playing with a Force Feedback racing wheel may cause muscle or joint pain. To avoid any problems:

• Avoid lengthy gaming periods.
• Take 10 to 15-minute breaks after each hour of play.
• If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and rest for a few hours before you start playing again.
• If the symptoms or pain indicated persist when you start playing again, stop playing and consult your doctor.
• Keep out of children’s reach. * During gameplay, always leave both hands correctly positioned on the wheel without completely letting go.
• During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
• During calibration and gameplay, never place your hand or your arm through the openings in the racing wheel.
• Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.

Product to be handled only by users 16 years of age or older| Be careful not to drop the product on yourself or on anyone else!

Warning – Pedal set pinch hazard when playing

•  Keep the pedal set out of children’s reach.
• During gameplay, never place your fingers on or anywhere near the sides of the pedals.
• During gameplay, never place your fingers on or anywhere near the pedal’s rear base.
• During gameplay, never place your fingers on or anywhere near the pedal’s front base.

Warning – Pedal set pinch hazard when playing

• Keep the pedal set out of children’s reach.
• During gameplay, never place your fingers on or anywhere near the sides of the pedals.
• During gameplay, never place your fingers on or anywhere near the pedal’s rear base.
• During gameplay, never place your fingers on or anywhere near the pedal’s front base.

Warning – Pedal set pinch hazard when not playing

• Store the pedal set in a safe place, and keep it out of children’s reach.

UPDATING YOUR RACING WHEEL’S FIRMWARE
The firmware included in your racing wheel’s base can be updated to a more recent version featuring product enhancements.
To display the firmware version that your racing wheel is currently using and update it if required: on PC, visit https://support.thrustmaster.com. Click Racing Wheels / T-GT II, then select Firmware and follow the instructions describing the download and installation procedure.
Important note:
On PC, the USB sliding switch (11) on the racing wheel’s base must always be set to the “OTHER” position.

INSTALLING THE WHEEL ON ITS BASE

Align the connector positions using the arrows:
Base (1) connector: Arrow pointing upwards Racing wheel (2) connector: Arrow pointing upwards
Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (15) device’s ring anticlockwise, while holding the racing wheel (2) in position.
Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel clockwise.

Once you have installed the wheel, rotate it 180° (when facing the wheel, the GT logo should be upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release (15) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive force), turning it clockwise.
When using a Philips screwdriver, ensure NOT to use excessive force when tightening the small attachment screw!
Stop turning the screw as soon as you feel some resistance.

ATTACHING THE RACING WHEEL

Attaching the racing wheel’s base to a cockpit
24 2 M6-type hexagon head/Phillips-head bolts
25 2 washers
26 2 mounting discs (metal on one side, and textured rubber on the other)

1. Position the washers (25) on the metal sides of the mounting discs (26), and insert the M6-type hexagon head/Phillips-head bolts (24).
2. Place the racing wheel’s base on the cockpit shelf.
3. Using a 10 mm wrench key or a Phillips-head screwdriver, screw the cockpit mounting kit into the cockpit shelf and into the 2 small screw threads located on the underside of the wheel.

ATTENTION:

• Do not remove the foam pads located on the underside of the racing wheel’s base! The foam pads amplify the effects of the T-DFB system when the wheel is attached.
• The textured rubber side of the mounting discs (26) must imperatively be positioned facing the cockpit shelf = never position the metal side facing the cockpit shelf.

1. Attaching the racing wheel to a table or a desktop
   
   Place the racing wheel on a table or any other horizontal, flat and stable surface.

2. Insert the fastening screw (14) in the attachment system (13), then tighten the device by turning the screw anticlockwise, so that it feeds into the large threaded hole (12) located beneath the racing wheel until the wheel is perfectly stable.

WARNING:

• Never tighten the screw alone, without the attachment system in place (this could damage the racing wheel).
• Do not remove the foam pads located on the underside of the racing wheel’s base! The foam pads amplify the effects of the T-DFB system when the wheel is attached.

To tighten:
Turn the screw anticlockwise|
To release:
Turn the screw clockwise|

SETTING UP THE RACING WHEEL FOR PS5™ CONSOLES AND PS4™ CONSOLES

1. Connect the pedal set to its connector (19) located at the rear of the racing wheel’s base.
2. Connect the T-TURBO power supply (21) to its connector (17).
3. Connect the power supply cable (22) to the T-TURBO power supply, and plug the cable into an electrical outlet with the same voltage.
4. Set the USB sliding switch (11) to the “OTHER” or “GT” position, depending on the PS5™ game or PS4™ game you are using.
5. Connect the removable USB cable (23) to its connector (18) and to one of the USB ports on the PS5™ console or PS4™ console.
6. Once your PS5™ console or PS4™ console is powered on, your racing wheel will calibrate itself .
7. Press the PS button (9) on the racing wheel, and log in to your PlayStation™Network account in order for your wheel to be functional. You are now ready to play!

Important notes:

• Don’t forget to press the PS button (9) on the racing wheel, in order for your wheel to be functional.
• The USB sliding switch (11) on the wheel’s base must always be set to the proper position (“OTHER” or “GT”) before connecting the racing wheel’s USB cable to your console. To change the sliding switch’s position: disconnect the USB cable, and then set the switch to the appropriate position before reconnecting the USB cable to the console.
• The list of PlayStation®5 games and PlayStation®4 games compatible with the T-GT II (along with the required position for the USB sliding switch (11) according to the game you are using) is available here: https://support.thrustmaster.com (in the Racing Wheels/T-GT II  section). This list is updated regularly.

USB SLIDING SWITCH (11) IN THE “OTHER” POSITION FOR PS5™ GAMES AND PS4™ GAMES APART FROM GT SPORT
When the USB sliding switch (11) is set to the “OTHER” position:

• The Force Feedback system is functional, but the T-DFB effects system (16) is not.

USB SLIDING SWITCH (11) IN THE “GT” POSITION FOR THE GAME GT SPORT (AND OTHER FUTURE GT GAMES)
When the USB sliding switch (11) is set to the “GT” position:

• The Force Feedback system, and the T-DFB effects system (16), are both functional at the same time. In the GT Sport game’s options, the power level of each system can be adjusted independently.

SETTING UP THE RACING WHEEL FOR PC**
PC compatibility not endorsed by Sony Interactive Entertainment Europe and Sony Interactive Entertainment LLC.
For more information, visit https://support.thrustmaster.com.
WARNING:
Never touch the racing wheel during the self-calibration phase!
(This could result in improper calibration and/or personal injuries.)
WARNING:
Never touch the racing wheel during the self-calibration phase!
(This could result in improper calibration and/or personal injuries.)
If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly calibrated:
Power off your console and completely disconnect the racing wheel. Then reconnect all cables (including the power supply cable and the pedal set), and restart your console and your game.
INTERNAL COOLING SYSTEM FOR THE WHEEL’S BASE**
The internal cooling system for the wheel’s base

• starts working when the wheel is powered on.
• switches off after a few minutes of inactivity when the internal temperature cools down to a low level.
• switches on again when you use the wheel.

MODE BUTTON AND INDICATOR LIGHT (10)
MODE button for the pedal set
You can electronically swap the gas and clutch pedals.
To do so, simply press the MODE button (10) for 2 seconds.
The racing wheel’s internal memory stores whether the pedals have been swapped around or not.

Other information regarding the MODE button
To learn more about the MODE button and indicator light, please visit
https://support.thrustmaster.com. Click Racing Wheels/T-GT II, and then select Manual or FAQ.
HELP FILES AND FAQS
Please visit https://support.thrustmaster.com. Click Racing Wheels/T-GT II, and then select Manual or FAQ.

T-GT II EDITION PEDAL SET

TECHNICAL FEATURES

1. Metal support for conical stop (not installed by default)

2. Conical stop

3. Attachment screw for metal support

4. 2.5 mm Allen key (included)

5. Position adjustment nut for conical stop
   

6. Metal pedal arm

7. Plastic head support

8. Metal pedal head

WARNING
Before using this product, be sure to read these instructions carefully and save them for future reference.
For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet.
THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.
Warning – Pedal set pinching hazard during gaming sessions

• Keep the pedal set out of the reach of children.
• During gaming sessions, never place your fingers or thumbs on or near the sides of the pedals.
• During gaming sessions, never place your fingers or thumbs on or near the rear base of the pedals.
• During gaming sessions, never place your fingers or thumbs on or near the front base of the pedals.

AUTOMATIC CALIBRATION OF PEDALS

IMPORTANT:

• Never connect or disconnect the pedal set from the base of the wheel when the wheel is connected to a PS5™ console or PS4™ console or to a PC, or during gaming sessions, to avoid calibration problems.
• Always connect the pedal set to the wheel before connecting the wheel to a PS5™ console or PS4™ console or to a PC.
• Once the wheel has self-calibrated and the game has started, the pedals automatically calibrate themselves after being pressed a few times.
• Never press on the pedals when the wheel is self-calibrating or when your game is starting up, to avoid calibration problems.
• If the pedals are not functioning correctly or appear to be improperly calibrated, power off your system, completely disconnect your wheel, then reconnect all of the cables (including the power supply cable and the pedal set cable), power the system back on and restart your game.

ATTACHING THE PEDAL SET TO A COCKPIT

• Attach the pedal set using the small screw threads located on the underside of the pedal set.
• Screw two M6 screws (not included) into the cockpit’s pedal support plate and into the two small screw threads located on the underside of the pedal set.

Important: The length of the two M6 screws must not exceed the thickness of the cockpit’s pedal support plate plus an additional 10 mm, to avoid damaging the pedal set’s internal components.

ADJUSTING THE PEDAL SET

Each of the three pedals includes:

• A metal head (8) with multiple perforations (nine for the gas – two for the brake – six for the clutch).
• Plastic head support (7) (placed between the head and the arm) with four perforations.
• A metal pedal arm (6) with four perforations.

ATTENTION: To avoid any calibration problems, be sure to always disconnect your wheel’s USB cable from the PS5™ console or PS4™ console before making any adjustments to your pedal set.
Adjusting the HEIGHT of the 3 pedals

• Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place.
• Select your preferred height position, then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place.

Adjusting the SPACING of the gas pedal and the clutch pedal

• Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and it’s support (7) in place.
• Select your preferred position (to the left, centered, or to the right), then replace and re-tighten thescrews so that the metal head (8) and its support (7) are held firmly in place.

A number of possible spacing positions per pedal:

• Three for the gas pedal
• Three for a clutch pedal

Adjusting the INCLINATION of the 3 pedals

• Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place.
• Turn the plastic head support (7) 180°, then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place.

A number of possible inclination positions per pedal:

• Two for the gas pedal
• Two for the brake pedal
• Two for a clutch pedal

Installing the conical stop (“CONICAL RUBBER BRAKE” mod)
This modification (or “mod”) is not essential and is not installed by default. This means that the brake pedal functions perfectly even if the mod is not installed.
This mod lets you experience a different feeling and resistance when braking. It’s up to you whether or not to install it, depending on your own preferences.

• Screw the conical stop (2) onto its metal support (1).
• Screw the position adjustment nut (5) onto the bottom (onto the conical stop’s screw thread).

• Position the unit at the back of the brake pedal’s arm.

• Using the included 2.5 mm Allen key (4), attach the unit using the attachment screw (3) and the small central screw thread located on the underside of the pedal set.

Adjusting the brake pedal’s RANGE of travel and STRENGTH of resistance
By slightly unscrewing the nut (5), you can further strengthen the resistance of the brake pedal by moving the conical stop (2) closer to the back of the pedal’s arm (if necessary, use a 14 mm wrench or pliers to re- tighten the nut and maintain the selected position). The closer the conical stop is positioned to the back of the pedal’s arm, the greater the strength of resistance will be.

Note: When the conical stop is very close to the back of the brake pedal’s arm, you may experience difficulties in reaching the maximum calibration value. Should that be the case:

• Slowly, press very hard on the brake pedal so as to reach the maximum value (if necessary, stand very briefly on the pedal – just for a second), then release the pressure; or else
• Move the conical stop a bit farther away from the back of the brake pedal’s arm.

CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product. In the countries of the European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).
Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months from the date of original purchase.
Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow? If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or from the date on which the product in question is made available for reconditioning, if the date on which the product is made available for reconditioning is subsequent to the date of the request for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has been used for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at public auction. This warranty is non-transferable.
The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country are not affected by this warranty.
Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and by providing the consumer with the required spare part(s), where applicable).
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period has expired.
In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any third party for any consequential or incidental damages resulting from the breach of any express or implied warranties. Some States/Provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of liability for consequential or incidental damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State or Province to Province.
Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the product has been modified, opened, or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or manufacturing defect with respect to the product (including, but not limited to, any damages caused directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).
DECLARATION OF CONFORMITY CANADIAN COMPLIANCE NOTICE:
this Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

COPYRIGHT ©2021 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. Manufactured and distributed by Guillemot Corporation S.A. All other trademarks and brand names are hereby acknowledged and are the property of their respective owners. Contents, designs, and specifications are subject to changes without notice and may vary from one country to another. Photos and illustrations are not binding. Designed in North America and Europe, made in China.
For use exclusively with PlayStation®5 consoles and PlayStation®4 consoles. “1”, “PlayStation”, “PS5”, and “PS4” are registered trademarks or trademarks of Sony Interactive Entertainment Inc. All rights reserved. All other trademarks are the property of their respective owners. Manufactured and distributed under license from Sony Interactive Entertainment LLC. Gran Turismo and Gran Turismo logo are registered trademarks or trademarks of Sony Interactive Entertainment Inc.
TouchSense® technology is licensed from Immersion Software Ireland Limited. Protected by one or more of the U.S. Patents found at the following address: www.immersion.com/patent-marking.html, and other patents pending.
ENVIRONMENTAL PROTECTION RECOMMENDATION
In the European Union, the UK, and Turkey: At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is confirmed by the symbol found on the product, user manual or packaging. Depending on their characteristics, the materials may be recycled. Through recycling and other forms of processing Waste Electrical and Electronic Equipment, you can make a significant contribution towards helping to protect the environment. Please contact your local authorities for information on the collection point nearest you.

• For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.

Retain this information. Colors and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it is used. www.thrustmaster.com
*Applicable to EU, UK and Turkey only

TECHNICAL SUPPORT
https://support.thrustmaster.com
UK: 020 3147 4889
US:866-889-5036
Canada:866-889-2181

References

• Transforming hard-to-abate - Aster
• Thrustmaster - Technical support website
• Thrustmaster - Technical support website
• Legal - Immersion - Haptic Technology
• Thrustmaster | Wheels, Joysticks and Gamepads for video games
• Thrustmaster - Technical support website
• Thrustmaster - Technical support website
• Thrustmaster - Sito internet assistenza tecnica

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>