DIGITUS DA-10195 4-Port USB Charging Adapter Installation Guide

: June 5, 2024
: DIGITUS

Table of Contents

INTRODUCTION
FEATURES
SPECIFICATIONS
PACKAGE CONTENTS
OPERATION
CONNECTION DIAGRAM
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4-Port USB Charging Adapter,
USB Type-C™ DIGITUS DA 10195 4 Port USB Charging
Adapter Quick Installation Guide
DA-10195 Rev 2.0

INTRODUCTION

The Digitus® 4-Port USB Charging Adapter, USB Type-C™ is the universal charging station for all your devices. The USB-C charging port (max. 520V/3A/60W) with Power Delivery (PD) 3.0 functionality is used to quickly and efficiently recharge ultrabooks, laptops, tablets, smartphones, mobile game consoles, etc. Use three USB-A charging ports (total: 5V/2.4A, each of which can deliver max. 5V/2.4A) to charge any kind of mobile device such as smartphones, tablets, power banks, speakers, etc. The total output power is 72W.

FEATURES

Internal chip allows the 100-240V AC of input voltage.
Four USB connectors outputs: 3x USB A ports, provide 5V/2.4A in total, every port provides 5V/2.4A (max), and equipped with intelligent IC and automatically identifies the handheld devices attached to the USB port 1x USB-C port with 5V/9V/15V/20V DC and 3A output
Accurate limited current output and over current protection.
Overload protection and over-voltage protection.
Short circuit protection.
Over-temperature protection and remove the fault condition auto-recovery.
Select precision electrical components, fire line version, and imported fire plastic.
Portable and convenient to use.
Specially designed for your Type-C supported devices.

DIGITUS DA 10195 4 Port USB Charging Adapter -
FEATURES

SPECIFICATIONS

Input/Output

Input| 100-240VAC 50/60Hz
Output| USB-A: 5V/2.4A

USB-C: 5V, 9V, 15V, 20V/3A

USB-C: 81.4%

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make
sure the following items are contained in the shipping carton:

Main unit×1
Power Cord×1
User Manual×1

OPERATION

Operation Procedures

Plug the DC connector of the power adapter into the interface of the power station, and then plug the other connector of the power adapter into the socket.
Plug one USB connector of the cable into the interface of the charger and plug the other connector of the cable into the electronic device (notebook, smartphone, tablet, etc.)
Please pull the USB connector out after the electronic equipment’s fully charged.

All brand names and logos mentioned above are trademarks or registered trademarks of the respective owner.

Operation Notes

For optimum performance, please use the power station according to the user manual.
Please plug the power adapter into a socket whose voltage range should be 100~240VAC.
Please unplug the power adapter after using it.
Note: Our products have protection functions and the two tips above are suggestions just for safety.
Do not use the power station with an electronic product that is not in conformity with the specifications, so as to avoid any problems caused by specification mismatching.
It’s normal that the power adapter and power station will be a little overheated in the use process.
. When the power station stops working under over-current, over-temperature, or short-circuit protection, please unplug the device after it automatically returns to work, then you need to check whether the device is compatible with this charger.
Do not let the power station close to the fire, such as stove, candles and etc.
Do not let the power station soak into liquid, such as swimming pool, bathtub, etc.
Do not wash the power station with corrosive cleaner.
If the power station cannot work properly, please contact the store or distributor in your area.

CONNECTION DIAGRAM

DIGITUS DA 10195 4 Port USB Charging Adapter - CONNECTION
DIAGRA

Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it
by post under the below-mentioned manufacturer address.

www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany