JESLED TRY303 LED Strip Light Installation Guide

LED STRIP LIGHT
UK,DE,FR,IT,ES
USER MANUAL

Parameters

Installation Diagram

NOTE:

Please DO NOT plug into the outlet for a long time when the strip light is rolled up, test the light when it is unfolded.

Installation

a. Open the package and unfold the strip light. Please check whether the strip light appearance and all parts are in good condition. Then power the strip light to test whether it could light normally.
b. Clean the surface of the object where the strip needs to be installed and keep it dry. Any dust and liquid will affect the stickiness of the 3M adhensive.
C. Tear off the adhesive tape, paste the strip on the correct place at once time. (Note: Do not move the strip light to other places after it is attached.)
d. Press the strip firmly from the beginning to the end to remove the air from the strip and the surface of the object.
e. The installation is over, please connect the power with strip light. You can switch the light on/off and choose the color by the IR remote.

WIFI CONTROL, APP Installation

Connection Instructions

1. Click ‘+’ or ‘Add Device’, then choose ‘Lighting’ and ‘ Strip Lights(Wi-Fi)’

2. Confirm whether the strip light is blinking fast first. 1)If it is blinking fast, please skip the reset step, then click ‘Confirm indicator rapidly blink’. Enter your Wi-Fi password and confirm, then wait for the connection to complete 2)If it is not blinking fast, please follow the reset step by step. Click ‘Resetting Devices’ to finish the setting. Then click confirm indicator rapidly blink’. Enter your Wi-Fi password and confirm, then wait for the connection to complete

3. After connecting, you can rename this device, such as ‘Bedroom’, ‘TV Backlight’ … which is convenient to manage later.

4. There are four different modules at the bottom of the page.

5. RGB Color : lamp On/Off; change various colors, and increase/decrease their brightness by adjusting the first line.
   (NOTE: If you need white color, just adjust the second line to the 0%)

6. DIY Function : There are 8 different scenes. Click ‘Edit’ to DIY your own favorite colors. You can reset the picture, name, and color.
   (NOTE: there are three different colour modes ‘Static”Flash’ and ‘Breath’ for the ‘Scene Colour’. Just one color can be set for ‘Static’ mode, while the other two modes can set eight colors.)When ‘Reset’ is completed, click ‘Submit’ to keep this DIY color.

7. Music Sync : You can open the music player on your phone, then the strip light will blink and change color with the music rhythm.
   (NOTE: The page must stay in the music module, otherwise they will not sync.)

8. Timing Function : You can set the time when this strip light is turned on and off every weekday, every weekend, or every day. And you can also set how long the strip light will turn off.

9. Our strip light can also be controlled by third-party apps, such as Alexa, Google Assistant… And the existing device can be removed and connected to other devices.

IR REMOTE CONTROL

and W for White
Jump 3/7| Jump Cyclically in 3/7 preset colors
Fade 3/7| Fade Cyclically in 3/7 preset colors
Timing Function| 0.5 hours / 1 hour / 4 hours
DIY| Click any DIY button to enter the DIY mode. By adjusting between R1G/B brightness button, you can easily increase or reduce the R/G113 color to generate multiple combinations of colors: then please double-click the DIY button to save the current settings. Next time you can click the corresponding DIY button directly to display the corresponding DIY color. You can Save 3 DIY setting colors at most.
QUICK/SLOW| Click to adjust the changing speed of the mode.
AUTO| Click to change mode automatically.

ATTENTION

1. Please DO NOT plug into the outlet for a long time when the strip light is rolled up. The strip light must be unfolded when you test it.
2. The strip light must be installed on a smooth, clean, and dry surface. When it is installed, do not plug into the outlet, and the bend should be avoided just in the position of the LED components, so as not to damage the product and affect its service life.
3. The strip light should not be collided or crushed.
4. The strip light can be cut along the cutting mark. Please make sure the power is off first. (NOTE: NO repair tools are provided in the package.)
5. Do not connect a controller of any other brand to JESLED’s adapter.
6. Please pay attention to anti-static during the installation and use of the product. Do not use sharp objects to touch the product, and avoid damage to the product.
7. Please make sure there is no hidden nail or metal conductive object in the contact part between the light and the wall. If there is, remove or avoid the conductive object in advance to prevent unnecessary short-circuit of the strip light.
8. Children must use this strip light under the supervision of a guardian.

Sea&Mew Consulting GmbH
Mittenhuber Stralle 4,92318
Neumarkt
Yuan Li
Compliance.EU@outlook.com
Sea&Mew Accounting Ltd
Electric Avenue Vision 25,
London, Enfield EN3 7GD
Billy Han
info@seamew.net

Customer Service:

To provide you with the best products and service is our eternal goal. If you meet any issue during using, please contact us, we will solve it for you.

support-eu@jesled.com
Website: www.jesled.com
Cell: +86-185-7558-8152
Manufacturer: Dong Guan City Shengwei Lighting Co., Ltd
24/7 HOURS CUSTOMER SERVICE

MADE IN CHINA

Documents / Resources

| JESLED TRY303 LED Strip Light [pdf] Installation Guide
TRY303 LED Strip Light, TRY303, LED Strip Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>