DIGITUS DN-10130-1 Gigabit Ethernet PCI Express Network Card Installation Guide
- June 5, 2024
- DIGITUS
Table of Contents
DIGITUS DN-10130-1 Gigabit Ethernet PCI Express Network Card Installation
Guide
DN-10130-1
Products Highlight
- Realtek RTL8111H Gigabit Ethernet Controller: High performance and reliability; low power
- Data Rate Supported per Port: 10, 100 & 1,000 Mbps
- Bus Type: PCI Express X 1 (2.5 GT/s)
- Bus Width: x1 lane PCI Express operable in x1, x4, x8, x16 slots
- Bus Speed (x1, encoded rate): 2.5 Gbps uni-directional; 5 Gbps bi-directional
- Connectors: RJ-45*1
- IEEE Support: IEEE802.1p IEEE802.2 IEEE802.3ac, IEEE802.3az, IEEE802.3x
- LED Indicators: LINK/ACTIVITY
Specifications
Package content
- 1 x Gigabit Ethernet PCI Express Network Card
- 1 x Quick Installation Guide
- 1 x Driver CD
- 1 x Low profile bracket
System Requirements
- Windows 11/10/8.1/8/7, Windows Server 2008/2012, FreeBSD, Linux
- Available PCI Express x1slot
Hardware installation
- Turn off the computer and unplug the power cord
- Remove the computer cover and the PCIe card slot cover from the slot that matches your PCIe card
- Insert the PCIe card edge connector into the slot and secure the bracket to the chassis
- Replace the computer cover, then plug in the power cord
- Power on the computer
- Connect the RJ-45 network cable
Install Drivers
Windows® Operating Systems
You must have administrative rights to the operating system to install the
drivers.
- Insert the CD driver bound with Realtek network driver into your CD-ROM drive.
- Start the autorun located in the software package, the autorun may automatically start after you have extracted files
- Click install Drivers and Software
- Follow the instructions in the install wizard to finish it
To Verify Windows® Driver Installation
Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. If you use the DN-10130-1 network card, you should see one “Realtek PCIe GBE Family Controller”…installed under Network adapters item.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid Germany
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>