HARVEST HTG-TEC-GUI-003 Media Decoder NQD User Guide
- June 5, 2024
- Harvest
Table of Contents
MEDIA DECODER NQD
Quick Start Guide
Overview
Welcome to the Nodestream Quad Decoder (NQD)
Please read these instructions carefully before using this product and save
this quick start guide for future reference. See the User Manual for full
details via the QR code on the back page.
Video and two-way audio streaming solution
In the Box
Rear Connections
IMPORTANT: 100-240VAC 47/63HZ only (UPS recommended).
Do not use the Display Port or HDMI for output to monitors. (Use the Mini-
Display port only).
Front Connections
Installation
The NQD is designed to be mounted in a standard 19” Rack and occupies 3U of space
Ensure there is adequate spacing around the NQD device for cooling. Cooling
air travels in the direction shown by the arrows.
No vertical loading on the NQD device.
Configuration
- Switch on the power (rear of device)
- Initial Configuration On the initial boot sequence an on-screen GUI displays, if required, configure network settings (see User Manual)
- Select Run System to start Nodestream software
- Typical start sequence…
- Refer to the Nodester application for device status and connection management
Once Run System is selected, the Nodestream software will start automatically when the device is power cycled. To access the on-screen GUI, power cycle the device and select stop applications when prompted.
|
---|---
https://qrco.de/bcfxAB| Contact and Support
support@harvest-tech.com.au
Troubleshooting
| Issue | Cause | Resolution |
|---|---|---|
| Device not powering | PSU switch set to off position AC not connected | Confirm |
AC is connected and switch is in the on position
No display output| Video output device not connected or powered on| Confirm
video output device is connected and powered on
No network – “Connecting to Nodestream server 0%” message displayed| No
connection to the server| Check Ethernet cable plugged in Ensure required
firewall ports settings are correct (see User Manual) Check network settings,
contact your network administrator to diagnose network issues
Harvest Technology Pty Ltd
7 Turner Ave, Technology Park Bentley WA 6102, Australia
www.harvest.technology
All rights reserved. This document is the property of Harvest Technology Pty
Ltd. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, photocopy,
recording, or otherwise without the written consent of the Managing Director
of Harvest Technology Pty Ltd.
HTG-TEC-GUI-003_2