BOYI WK68 Hot Swappable RGB Mechanical Keyboard User Guide
- June 5, 2024
- BOYI
Table of Contents
BOYI WK68 Hot Swappable RGB Mechanical Keyboard User Guide
Combination | Function |
---|---|
FN+ESC | ~ |
FN+1 | F1 |
FN+2 | F2 |
FN+3 | F3 |
FN+4 | F4 |
FN+5 | F5 |
FN+6 | F6 |
FN+7 | F7 |
FN+8 | F8 |
FN+9 | F9 |
FN+0 | F10 |
FN+- | F11 |
FN+= | F12 |
FN+U | PRT SCR |
FN+I | Scrlk |
FN+P | Switch to different light color |
FN+[ | Decrease Brightness |
FN+] | Increase Brightness |
FN+| Switch to different light mode | |
FN+A | Pause/Play |
FN+S | Previous song |
FN+D | Next song |
FN+F | Mute |
FN+G | Volume up |
FN+H | Volume down |
FN+J | INS |
FN+K | HOME |
FN+; | Decrease LED speed |
FN+’ | Increase LED speed |
FN+Pause | 2.4G wireless mode connection |
FN+Pg Up | Turn on/off all backlit |
FN+Pg dn | Switch to custom backlit mode |
FN+Z | Bluetooth device 1 |
FN+X | Bluetooth device 2 |
FN+C | Bluetooth device 3 |
FN+, | END |
FN+Win | Lock the WIN |
Ctrl+Alt+Q | Reset to factory defaults |
Product Name: BOYI WK68 Hot Swappable RGB Mechanical Keyboard,Wireless Bluetooth 5.0/2.4G/Wired Type-C Tri-Mode PBT Sublimation Keycaps 65%GamingKeyboard
How to use this Keyboard:
Power Indicator Light:
Lithium battery(3.7V):If the battery voltage is lower than 3.3V,the red
indicator light of the keyboard will flash.The red indicator light is on when
charging and off when fully charged.
4G wireless mode connection:
After the keyboard is turned on,long press “FN+Pause” combination keys 3
seconds andthe indicator light will flash quickly.If the indicator keeps on
for 10 seconds after plugging inthe receiver,keyboard is connected in this
mode.
Bluetooth mode connection:
Long press “FN+Z/X/C” combination keys 3 seconds,the indicator will flash
quickly.If the indicator keeps on for 10 seconds after connecting your
device,the keyboard is connected in this mode.If the keyboard isn’t
connected,the indicator goes out and the keyboard will go into the sleep mode.
Backlit modes:
Press “FN+\” combination keys to switch the keyboard backlit modes. Backlit
mode order:light wave(default),normal,breath,ripple,light
rain,serpentine,follow,polymerization,neon,laser,sine wave,RGB wave,aurora
wave,light flowers,colorful spring surging. The function of “FN+PgUp”
combination keys is turn on/off all backlit. And press “FN+Pgdn” combination
keys to switch to the custom backlit mode.The default backlit mode is inverted
triangle lighting effect.Adjusting the custom backlit needs to use the
keyboard drive. The normal backlit mode can’t adjust the light speed,neon and
RGB wave backlit mode can’t adjust the light color.Other backlit modes can
adjust different light speed,brightness and color.There are 7 levels of the
brightness and its default is maximum brightness. There are 5 levels of the
speed and its default is the third level.Color order :multi color,ice
blue,red,green,blue,orange,purple,yellow.
Keyboard display name:
Product Model:BOYI WK68
Wired mode:BOYI 68 Mini
2.4G mode:2.4G Wireless Device
BT3.0 mode:BT3.0 KB
BT5.0 mode:BT5.0 KB
Operating distance: >10m 360° (under external environment interference)
Bluetooth connection back time: ≤5s
Compatibility:
Bluetooth:Compatible with all Bluetooth Dongle on the market,notebook built in Bluetooth module. Bluetooth 5.0 mode needs to support Windows 8 or above,tablets and mobile phones,etc.
2.4G: According to USB standard protocol,compatible with Windows2000 and MAC.
Electrical parameters (for reference only)
Charging current | 540-580mA |
---|---|
Wired normal mode current | 110.2mA |
2.4G normal mode current | 200.0mA |
2.4G sleep mode current | 0.14mA |
Bluetooth 3.0 normal mode current | 183.5mA |
Bluetooth 3.0 sleep mode current | 0.14mA |
Bluetooth 5.0 normal mode current | 182.6mA |
Bluetooth 5.0 sleep mode current | 0.14mA |
No backlit current | 39.8mA |
NKRO: all the connection mode and connected devices support anti- ghosting.
Working voltage: 3.7V
Connection mode: wired, 2.4G, Bluetooth 3.0,Bluetooth 5.0
RF power: 30dbm
Working frequency: 2402/2446/2479
System requirements
Port | USB |
---|---|
Compatible system | Windows 2000 or above,MAC,BLE support Windows 8 or above |
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and This device must accept
any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>