Boyi BY-528V Portable Watch Charger User Manual
- June 15, 2024
- BOYI
Table of Contents
User Manual
Product Description
Product Specifications: TYPE-C to iWatch Wireless Charger
Input Interface: Type-C Female
Input Voltage: 4.9-5.5V
Input Current: 2A Max
Wireless Charging Output Power: 2.5W Max
This product is a TYPE-C to iWatch wireless charger that utilizes the
MicroCMS8S6990NA dedicated wireless charging solution. It is compatible with
Apple Watch Series 2, Apple Watch Series 3, Apple Watch Series 4, Apple Watch
Series 5, Apple Watch Series 6, Apple Watch Series 7, Apple Watch Series 8,
Apple Watch Series 9, Apple Watch Ultra, and Apple Watch SE.
The product supports automatic output power adjustment, voltage protection, temperature protection, and FOD (Foreign Object Detection).
This product supports both Type-C input and output functions and automatically
detects
Type-C insertion and removal.
It supports wireless charging for Apple Watch, allowing you to charge your
watch.
A single touch of the touch button activates the power bank, while a double
touch turns it off.
The power bank will turn off if there is no load for over 32 seconds.
In case of detecting foreign objects within the first 30 seconds of turning
on, the power bank will automatically turn off. If the foreign object is
removed within 30 seconds, wireless charging will resume after 30 seconds.
In low battery mode, when the battery level is below 2%, the power bank will
shut down.
With a battery level of 2%-20%, the blue light will flash, and the battery
level will be indicated by 4 LED lights as follows: 1 light on (25%), 2 lights
on (50%), 3 lights on (75%), and 4 lights on (100%).
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>