BOYI TD21 Mechanical Numeric Keyboard Hot Swappable User Manual

June 14, 2024
BOYI

BOYI TD21 Mechanical Numeric Keyboard Hot Swappable

BOYI-TD21-Mechanical-Numeric-Keyboard-Hot-Swappable-
product

Product Information

  • Product Name: Mechanical Numeric Keyboard
  • Keyboard Layout: Hot-Swappable, Tri-Mode, RGB Backlit
  • Keys: 21keys
  • Battery: 1000mA
  • Current: 160mA
  • Voltage: DC 5V
  • Keyboard Size: 1328742mm/ 5.23.81.65in
  • Manufacturer: Made in China

Product Usage Instructions

Wired Mode

  1. Simply plug the keyboard into the computer using the cable provided in the package.

2.4G Connection Mode

  1. Toggle the switch to the left (in the middle of the sticker on the back of the keyboard) to enter the wireless mode.
  2. To enter 2.4G mode, press FN+ – (minus) keys simultaneously. The backlight of the – key will flash three times.
  3. Press and hold FN+ – for about 5 seconds until the backlight of the – key starts flashing rapidly.
  4. Plug the 2.4G receiver into your computer. The keyboard will automatically connect once the connection is successful, and the – key will stop flashing.

Bluetooth Connection Mode

  1. Enable Bluetooth on your device and search for Bluetooth devices.
  2. Look for “21 keyboard” in the list of available devices and click to connect.

Power Guide

  • Low Power: When the battery level is low, the FN backlight will flash red.
  • Charging: When the keyboard is being charged, the FN backlight will remain red.
  • Fully Charged: Once the keyboard is fully charged, the FN backlight will follow the keyboard animation.

Keyboard Features

  • Keys: 21keys
  • Battery: 1000mA
  • Current: 160mA
  • Voltage: DC 5V
  • Keyboard size: 1328742mm/ 5.23.81.65in

Keyboard Layout

BOYI-TD21-Mechanical-Numeric-Keyboard-Hot-Swappable-
fig-1

Connections

Wired Mode

  • Just simply plug to the computer by the cable in the package.

2.4G connection Mode

  1. Toggle the switch to the left (In the middle of the sticker on the back of the keyboard.) to enter the wireless mode.
  2. Enter 2.4G mode by short press FN+ – , the backlight of – key flashes three times.
  3. Press and hold FN+ – for about 5 seconds, the backlight of – key flashes fastly,
  4. Plug the 2.4G receiver into your computer, then will auto connect, after the connection issuccessful – the – key stops flashing.

Bluetooth connection mode

This keyboard can be connected to two groups of Bluetooth devices at the same time, respectively Fn+/or Fn+*, two groups of devices connected in the same way, only one group of connection methods are shown below.

  1. Toggle the switch to the left (In the middle of the sticker on the back of the keyboard.) to enter the wireless mode.
  2. Short press FN+ / to select one of the bluetooth groups, the backlight flashes white three times.
  3. Press and hold FN+ /for about 5 seconds. the backlight flashes of / key flashes white fastly.
  4. Turn on your computer or other Bluetooth devices that can support Bluetooth input to search for Bluetooth until 21 keyboard appears, click to connect.

After following the above steps to connect, you can short press the right key combination to switch to the connected device for use.

Functions

Surrounding light cycle switching:

BOYI-TD21-Mechanical-Numeric-Keyboard-Hot-Swappable-
fig-3

Keypad front Animation Backlight

BOYI-TD21-Mechanical-Numeric-Keyboard-Hot-Swappable-
fig-4

Power Guide

  • Low Power: FN backlight flashes red, when the battery level is low.
  • Charging: Fn backlight is always red.
  • Fully charged: Fn backlight follows keyboard animation.

More Information

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals