2Boom BX110 Surge Portable Wireless Speaker User Guide
- June 5, 2024
- 2Boom
Table of Contents
SURGE
Portable Wireless Speaker
Carefully read the User Guide to operate this unit properly Keep it for future
reference.
Instruction Manual
You are welcome to purchase.
To ensure the safe use of this product and to achieve the best results, please
read this manual carefully.
This product can be connected to a PC, TV, CD, VCD, DVD,
TUNER, TAPE, USB, TF, BT, and other audio equipment, it is easy to carry,
multi-functional with perfect design, excellent sound quality performance, we
believe it will bring you New feeling.
**Warm prompt
**
When charging the unit, please tum off the power switch, so as not to damage the battery, and do not constantly use the machine for a long time. In order to keep the battery in good condition,
Please charge and discharge the battery every 30 days or so.
Technical Parameters
Bluetooth version: V5.0
Driver size: 3in
Driver output: 5W
Distance: 32.8ft
Frequency Response: 100Hz-18kHz
Battery: 500mAh
Playing time: 1-1.5 hours
Charge time: 4-5 hours
5/N: > 80db
FCC ID: 2AIDL-13X110K
PANEL FUNCTION DECLARATION
- Play/Pause (FM: Automatic search)
- Previous song. Press the button for a second to lower the volume. (FM: Previous channel)
- Next song. Press the button for a second to enlarge the volume. (FM: The next channel)
- Mode (USB, TF, FM, BT)
- Charging socket (DC 5V)
- USB socket
- Micro SD card socket
- OFF/ON Speaker power off, speaker power on
Connect to BT
- Click the “MODE’ button for Bluetooth mode
- Turn on your smartphone’s BT and search for the device and select a2BOOM-BX110″.
- Connect with Model. Click the “ok” on the smartphone. Voice notice appears when connected successfully. (play and select music with a smartphone when connected through BT).
Micro SD Function
- Press the “MODE” button on the product to switch to TF mode or just insert a Micro SD card. TF mode will start automatically
- Press the “PLAY/PAUSE” button to continue play/pause
- Press the “NEXT” button to go to the next song.
- Press “PREVIOUS” to go back to the previous song.
USB Function
-
Press the “MODE” button on the product to switch to USB mode or just Insert a USBfl ash drive.
USB mode will start automatically -
Press “PLAY/PAUSE” to continue playing/pause music.
-
Press the “NEXT” button to go to the next song.
-
Press “PREVIOUS” to go back to the previous song.
FM Radio Function
- Press “MODE” on the product to switch to FM mode. Radio will start automatically
- Press the “PLAY/PAUSE’ button for seconds to enter automatic FM channel searching. Short press the button again to stay on the channel you want.
Press the “NEXT” button to go to the next frequency.
Press “PREVIOUS” to go back to the previous frequency.
TWS Function
- Turn on the speakers, and double press the ‘PAUSE’ button. After an indication of voice, two speakers could be connected with the same Bluetooth device and then play music together. Long press the °PAUSE” button again to cancel the TWS function
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notes: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, The device has been evaluated to meet
general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>