2Boom BX550 LED Fram Light Speaker User Manual

2Boom BX550 LED Fram Light Speaker

USER MANUAL

Model: BX550

PLEASE READ ALL INSTRUCTIONS CAREFULLY & RETAIN FOR FUTURE USE

GETTING STARTED:

Remove the unit from the box. Remove any packaging from the product.
Please retain all packaging until you have checked and counted all the parts and the contents against the parts list.

FEATURES：

• Wireless connectivity Colorful light FX
• Support USB/TF card
• FM Radio
• 3.5mm AUX-in function 6.5mm MIC-in Function
• Rechargeable Lithium battery

ACCESSORIES:

• Speaker: 1 pc
• Charging cable: 1 pc
• User Manual: 1 pc

HOW TO CONNECT BLUETOOTH:

Turn on the speaker unit and the Bluetooth switch on your mobile or other device and search for the speaker model name “2BOOM-BX550” and Pair the device. Once device is paired it will automatically connect when unit is turned on subsequently.

CHARGING:

Plug the USB cable into the speaker’s charging port and connect to the power source. The red LED indicator on panel will on when the unit is charging. And will be off once fully charged.

TRUE WIRELESS STEREO FUNCTION:

If have 2 units for BX550 speaker. Turn on both units, and double press “ll” button ,you will hear ‘’BEEP’’ sound and units will connect with each other automatically . Double press “ll” button again to cancel TWS connecting.

Note: True wireless stereo function only .

OPERATION:

1. Power ON/OFF
2. Short press to switch Bluetooth, USB, TF, AUX and FM modes;
Long press to change 5 light modes and turn ON/OFF light.
3. Short press to previous song /channel; Long press to decrease volume.
4. Long press to PLAY/PAUSE in BT mode and Searching channel in FM mode.
Double press to connect TWS function and double press to cancel.
5. Short press to next song /channel; Long press to increase volume.
6. 3.5mm AUX Input
7. 6.5mm Microphone Input
8. USB Driver
9. TF card Slot
10. DC 5V charging port

FCC ID: 2AIDL-BX550
QDID:194248

FCC STATEMRNT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,and
(2) This device must accept any interference received,including interference that may cause undesired operation.

Warming: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Notes: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications,However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Migear International Group LLC,
21 W 38th Street, 14th Floor, NY, NY 10018 USA
TEL: 929-390-4504

Specifications:

• Model: BX550

• Features:

  • Wireless connectivity
  • Colorful light FX
  • Support USB/TF card
  • FM Radio
  • 3.5mm AUX-in function
  • 6.5mm MIC-in Function
  • Rechargeable Lithium battery

• Accessories:

  • Speaker: 1 pc
  • Charging cable: 1 pc
  • User Manual: 1 pc

• FCC ID: 2AIDL-BX550

• QDID: 194248

Frequently Asked Questions (FAQ)

Q: What should I do if my device is not connecting via Bluetooth?

A: Make sure the Bluetooth switch is turned on, search for the correct model name, and try pairing again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>