2Boom HPBT295 LED Headphone User Manual

June 8, 2024
2Boom

2Boom HPBT295 LED Headphone User Manual
2Boom HPBT295 LED Headphone

Getting started

  • Remove the product from the box.
  • Remove any packaging from the product.
  • Please retain all packaging after you have checked and counted all the parts and the contents against the list.

Package Contents

  • Bluetooth Headphone
  • USB charging cable
  • Instruction Manual
  • Warranty card

Key Features

  • Bluetooth stereo headset
  • Built-in microphone for hands-free use with Bluetooth enabled devices
  • Comfortable adjustable design
  • Connects automatically to previously connected devices

Safety Instructions

Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. Do not use the unit if it has been dropped or damaged in any way. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not use the unit with wet hands. Do not put objects into any of the openings. Keep the unit free from dust, lint etc. Do not use this unit for anything other than its intended use. Keep the unit out of reach of children. This product is not a toy. Do not use the handset at excessive volume levels, as damage to hearing may occur.

Description of Parts:

Description of Parts:

1 ll <” button: Power on/off/Play/pause/Phone button
2 + <<”button : Volume up /Next track
3 “>> “button: Volume down/Previous track
4 USB Charging port
5 AUX port
6 Built-in Mic
7 Indicator light

INSTRUCTIONS FOR USE

Charging Instructions

  • The Bluetooth Headphone comes with a built in rechargeable battery. We recommend you charge the battery fully before using it for the first time. Only use the supplied USB Cable to charge the Bluetooth Headphone. Please charge for about 1.5-2.5 hours.
  • Connect the USB charging cable to a computer USB port and the Micro USB plug to the charging port of the device. The Red LED light turns on while the device is charging. It takes 1.5-2.5 hours for the unit to fully charge. When the battery is fully charged, the red light will turn off

Turning on/off the device

  • Press and the “ll<” button for 2-4 seconds to turn ON or OFF the device with indication tone.

Pairing the device with Bluetooth devices (phone or music device)

  • Place the Bluetooth Headphone and Bluetooth device (phone or music device) no further than 33 feet apart;
  • Activate the Bluetooth function on your Bluetooth device (phone or music device). Then select the “2BOOM-HPBT295” from the list of available Bluetooth devices.
  • Once paired successfully, the alert tone will be heard and the LED flashes blue slowly.
  • You can now start to use the device.
  • Please note pairing mode will last for around 3 minutes. If no devices are paired during this time, the device will power off automatically.
  • If pairing is unsuccessful, turn off the device first and then re-pair following the above steps.
  • Once you have paired the Bluetooth Headphone with a device, the Headphone will remember this device and will pair automatically when the device’s Bluetooth is activated and in range.
  • The Bluetooth Headphone will attempt to automatically connect to the last device it was paired with when switched on. If you want to pair it with a new device, please follow the steps outlined above.

Function Summary

Listening to Music

Control Function

Function Mode Operation Button
Answer a call Incoming Call Short press the ” ll <” button once to

answer an incoming call
End a call| Incoming Call| After your phone conversation, shortpress the ” ll <” button.
Reject call| Incoming call| Press the ” ll <” button for 1.5-2 secondsto reject the incoming call
Increase Volume| During a call| A long press on the “ + <<” button once will increase the volume
Decrease Volume| During a call| A long press on the “>> -“ button once will decrease the volume

Making a call with the Bluetooth Headphone in Bluetooth mode Basic operation.

Please Note:

  • Not all mobile phones support all the functions listed above. Please refer to your cell phone’s user’s manual for further information.
  • Certain functions and indication tone maybe vary depending on your mobile phone.

RGB LED LIGHT
The RGB LED light will turn on when the headphone is powered on, short press the “ll<” button twice to turn off, then short press twice to turn on again.

Indicator light

Charging Indication

LED indicator Status of the BT Headphone
Solid Red LED Charging
Red LED turns off Charging Completed

LED Indication

LED indicator Status of the BT Headphone
LED red and blue lights flashingalternately Pairing mode

Specifications

Operating distance 32.8feet
Working time (RGB LED on) 1.5H
Working time(RGB LED off) 4-5H
Charging input voltage DC 5V
Charging time 1.5-2.5H
Driver unit : 40mm, 32Ω
Built-In Battery 150mAh

(Note: Battery life & charging time may vary based on usage & types of devices used.)

FCC ID: 2AIDL-SS-HPBT295

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2. This device may not cause harmful interference, and
  3. This device must accept any interference received, including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure requirement. The device can be used in portable exposure condition without RF striction.

Migear International Group LLC,
21 W 38th Street, 14th Floor, NY, NY 10018 USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals