BenQ V7000i Ultra Short Throw Projectors Installation Guide

BenQ V7000i Ultra Short Throw Projectors Installation Guide

What in The Box **

**

Support.BenQ.com

Online Manual V7000i / V7050i / QS01

Product Support

Scan to watch how-to videos.

Before getting started

Check the size of your projection wall/screen and determine where to install the projector.

What You Need To Know Before You Buy Your Laser TV

Note: For details for projector placement, see “Measurements” .

Remove packing materials.

Install batteries to dongle’s remote control

Connect ATV dongle and power cord

How to make connections

How to connect to audio systems

Place the projector

Measurements of 100″ projection screen

Measurements of 120″ projection screen

1. Image size & aspect ratio Image dimensions
2. Projector-screen surface distance
3. TV shelf depth (Immobile)
4. Image bottom- shelf surface distance
5. TV shelf height (While image center at 1.4m high)

Note Values are provided for your quick installation. Fine adjustments may be required according to your needs.

Using the integrated measuring tool: to measure distance from projector to the wall

Power on and complete inital setup

1. 2. 

2. 

3. 

4. 
   Press OK on remote control to skip.

5. 
   Note See “6.   Screen adjustment” on page 9 for details.

6. 

Screen adjustment

How to adjust the screen

1. Focus adjustment
   
   > INSTALLATION > Motor Focus > Adjust 

2. Disable auto keystone
   
   > INSTALLATION > Auto Keystone > Off
   ****

   INSTALLATION > Keystone > 0.0

3. Screen edge adjustment
   
   > INSTALLATION > Test Pattern > On
   

4. Complete screen adjustment
   

Mark the position

The projector placement is complete. Mark the position if possible so you can align the projector again quickly once it is moved.

References

• Support | BenQ US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>