sonnax High Performance Driveline Parts Instructions
- June 3, 2024
- sonnax
Table of Contents
HIGH-PERFORMANCE DRIVELINE PARTS
Instructions
Pinion Yoke
Part No.
T9-28-1330FD
- Yoke
- Spacer
NOTE: Fits all 9″ Ford 28-spline differentials. Uses a 1330 U-joint. For
1350 U-joint, use T9-28-1350FD.
Carrier Bearing Identification & Spacer Use
NOTE: The included Sonnax spacer is used only in standard (small) bearing
carriers.
If you have a big bearing OE or a Daytona carrier, do not use a Sonnax spacer
(Figures 1–3).
NOTE: When using the Sonnax spacer, always install it behind the pinion
nut (like a washer) (Figure 2).
This spacer is NOT intended to be installed between the yoke and bearing.
Standard Carrier| **Bearing Width*| Pinion Bearing O.D.| Use Sonnax
Spacer**
---|---|---|---
2.2″| 2.675″| Yes
Big Bearing Carrier/Daytona| 2.5″| 3″| No
*Bearing width is the width between outer bearing faces when installed in the carrier.
Standard Bearing Carrier
Big Bearing Carrier
©2021 Sonnax Transmission Company, Inc.
A Marmon
Berkshire Hathaway Company
800-843-2600 •
802-463-9722
F:802-463-4059
www.sonnax.com
T9-28-1330FD-IN 11-11-21
Documents / Resources
|
sonnax High Performance Driveline
Parts
[pdf] Instructions
High Performance Driveline Parts, High Performance Driveline, Driveline Parts,
High Performance Parts, Performance Parts, Parts
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>