comsol WCPS10 10W Wireless Fast Charging Pad User Manual
- June 5, 2024
- comsol
Table of Contents
comsol WCPS10 10W Wireless Fast Charging Pad
Compatibility
Compatible with Qi-enabled devices* including
- iPhone 11 Pro/11
- iPhone XS/XS Max/XR
- iPhone X/8/8 Plus
- Samsung S10/S9/S8/S7
- Samsung Note 10/9/8/5
- Sony Xperia XZ3/XZ2
- Google Pixel 4/4 XL/3/3 XL
- Xiaomi Mi 9/Mi Mix 3
- Huawei Mate 30/20 Pro
- Huawei P30 Pro
- LG G8S/G7 ThinQ
- LG V30+/V40
Features
- Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more#
- Supports 7.5W Apple wireless fast charging for iPhones with wireless charging#
- Supports 5W standard wireless charging for all Qi enabled devices
- No need to remove your protective case. Works with most cases up to 3mm thick
- LED indicator to show charging status
- Smart IC enables energy saving mode when device is fully charged
- Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
- Includes 1.5m micro USB cable to connect charging pad to USB wall charger (USB wall charger not included)
Check with device manufacturer for Qi wireless compatibility When connected to a QC 2.0/3.0 or USB-C PD wall charger (not included)
Wireless Charger Operation
-
Using the included micro USB cable, connect the wireless charging pad to a USB wall charger (USB wall charger not included)
-
It is recommended to use original or reputable 3rd party branded USB wall chargers. For faster charging times it is recommended to use a USB wall charger with a minimum of 2A output
-
When connected to the USB charger, the LED will be red to indicate the charging pad is powered on and in stand-by mode
-
Place your Qi enabled wireless phone on the charging pad
and your phone should start charging automatically -
The blue LED will be permanently on to indicate charging
-
If your phone does not start charging, move your phone until the correct position is found and your phone starts charging
-
When your phone is fully charged, the Smart IC enables energy saving trickle charge mode
Please Note
To achieve 10W fast charging for Android devices or 7.5W fast charging for
Apple devices, the charging pad needs to be connected to a Quick Charge
2.0/3.0 or USB-C PD wall charger (not included)
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Quantity of Wireless Charging Coils: One Coil
- Input: DC 5V 2A or DC 9V 2A
- Output: 5W / 7.5W / 10W (Max)
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: >72%
- Dimensions: 126 x 65 x 6.9mm
- Weight: 50g
Important Safety Instructions
- Only use original or reputable third party chargers and cables
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging pad
iPhone is a trademark of Apple inc., registered in the U.S. and other countries. The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium. Android is a trademark of Google Inc.