comsol DPC10CH 10000mAh USB-C Power Bank User Manual
- June 5, 2024
- comsol
Table of Contents
comsol DPC10CH 10000mAh USB-C Power Bank
Power Bank Layout
Suitable for
- iPhone/iPad/iPod
- Most smartphones including Samsung, LG, Sony, HTC, Nokia, Microsoft, Huawei, Motorola, Google, OnePlus, Oppo & more
- Smartwatches, fitness trackers, digital cameras, portable gaming consoles, eReaders and drones
- Bluetooth devices such as speakers, headsets or earphones
Features
- Battery type: Lithium-Polymer
- 10000mAh provides 360% extra battery for an average smartphone*
- Get an extra 50 hours of talk time on an iPhone X or 47 hours on a Samsung Galaxy S9
- USB-C PD (Power Delivery) can fast-charge an iPhone Xs / Xs Max XR / X / 8 / 8 Plus from 0 to 50% in 30 minutes#
- Smart Power Chip identifies your device and provides maximum power for speedy charging times
- 2.4A high output for fast charging of iPad or tablet
- Rechargeable more than 500 times
- Includes 20cm USB-A to USB-C cable to charge power bank
- Built-in over charging and short circuit protection
- Watt Hour Rating: 37Wh
- USB-C Input: DC 5V 2A or 9V 2A
- Micro USB Input: DC 5V 2A
- USB-C PD Output: DC 5V 3A or 9V 2A or 12V 1.5A
- USB-A QC 3.0 Output: DC 5V 3A or 9V 2A or 12V 1.5A
- Total Output: 18W
- Charging Time: 4 to 10 hours depending on charger output
- Size: 140mm (L) x 72mm (W) x 15.3mm (H)
- Weight: 219g
- Certifications: QC 3.0, RCM, RoHS, UN38.3
To Charge Power Bank
- You can charge the power bank using either the USB-C input port or the micro USB input port
- To charge using the USB-C input port, use the included USB-A to USB-C cable and connect the USB-C input port on the power bank to a USB wall charger
- To charge using the micro USB input port, use a micro USB cable (not included) and connect the micro USB input port on the power bank to a USB wall charger
- During charging the digital LED display will flash to indicate the charging capacity status
- When charging is complete the digital LED display will show 100
To Charge Phone or USB Device
- To charge a USB-C device with PD (Power Delivery) such as a Google Pixel 2, Pixel 2 XL or 12 inch MacBook, connect your device to the USB-C port using a USB-C to USB-C cable (not included)
- To charge a Quick Charge compatible device, use your device’s original charging cable and connect one end to the QC 3.0 port on the power bank and the other end of the cable to your device
- Charging should commence automatically
- If charging doesn’t start, press the On/Off button to start charging
- If your phone or device uses a USB-C port, then you can also use the included cable to charge your device
- When your phone or device is fully charged, the power bank will automatically turn itself off
To Check Remaining Capacity
- Press On/Off button and the digital LED display will show the percentage remaining capacity
- The display will turn off automatically after about 5 seconds
Important Safety Instructions
- To maximize battery life span, fully charge power bank before first use for 8 to 10 hours
- Store power bank in a cool and dry place.
- Do not store power bank in hot or humid environment
- Operating temperature should be between -10c to 45c
- If power bank is not used for long periods of time, you should charge and discharge once every three months
- When charging a device, the power bank may feel warm, this is a normal operating condition and should not be cause for concern
- In normal conditions, the battery performance will decline over several years
- Do not dispose of power bank in heat or fire
- Do not clean power bank with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause product damage
References
Read User Manual Online (PDF format)
Loading......