comsol WCAC10 3-In-1 Wireless Charging Dock User Manual
- June 5, 2024
- comsol
Table of Contents
comsol WCAC10 3-In-1 Wireless Charging Dock
what is in box
- USB-C Power Input
- iPhone Charging Stand
- AirPods Charger
- Apple Watch Charger
Features
- Charge a wireless charging iPhone 8 or later, Apple Watch, AirPods Pro or AirPods.
- Note: AirPods must have Wireless Charging Case
- Supports 7.5W wireless fast charging for iPhone 8 or later
- Includes built-in certified Apple Watch Magnetic Charger
- No need to remove your phone case. Works with most cases up to 3mm thick
- Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
- Includes AC wall charger and 1.5m USB-C to USB-C cable
Operation
- Connect the wireless charging dock to power using the included wall charger and USB-A to USB-C cable.
- The green LED will briefly be on and then go off to indicate the charging pad is powered on and in stand-by mode
- Place your iPhone on the charging stand and charging should start automatically
- If your iPhone does not start charging, move your iPhone until the correct position is found and your iPhone starts charging
- Place your wireless charging Airpods on the AirPods charger
- Place your Apple watch on the Apple magnetic watch charger
- When your devices are fully charged, the Smart IC enables energy saving trickle charge mode
- Only use the original charger and cable that was supplied with the charging dock
- Only use the product for the specified purpose of use
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging dock
- Do not use the product if it is damaged or emits a suspicious odour
- Unplug the product from power sources when not in use
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Input: DC 12V/1.5A
- Wireless Stand Output: 10W / 7.5W / 5W
- Wireless AirPods Output: 2.5W
- Apple Watch Output: 2.5W
- Total Output: 15W (Max)
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: >70%
- Size: 169mm (L) x 80mm (W) x 132mm (H)
- Weight: 205g
- Certifications: RCM, RoHS, UN38.3
Qi Certified
Certification program ensures this charger has passed rigorous tests to
guarantee safety, compatibility and energy efficiency.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>