GUESS Mini Speaker Aluminium User Manual
- June 5, 2024
- GUESS
Table of Contents
GUESS Mini Speaker Aluminium
CHARGING BATTERY
- Insert the charging cable into the micro USB input port, connect the USB plug into 5V use terminal. The LED indicator will turn on.
- After charging is completed, the LED indicator will turn off.
Note: when music sound becomes smaller and you hear the warning tone please charge the speakers in time.
BLUETOOTH PAIRING FOR MUSIC & PHONE CALL
- To pair two speakers together, first delete their pairing on the device. Then turn on both speakers, the speakers will have voice prompt and the indicator will flash, then double click one of them, they will pair with each other after 3 seconds (For the second time, both speakers will pair themselves automatically). When successfully paired, both speakers will have voice prompt, one speaker’s indicator will flash and another one’s will keep lightning.
- Activate the Bluetooth of your devices and search for the pairing name “GUESS MINI”, and then click to pair the speakers with your devices. When succeeding in pairing, the speakers will connect with your device automatically.
- Open the music app in your Bluetooth devices to play music and the color LED indicators will keep flashing; one click on the button to control play/pause/get through/hang-up phone call.
- Turn off the speakers by pressing the for 2 seconds.
ABOUT THE SPEAKER’S USING ENVIRONMENT
- Bluetooth connection and transmission may be affected by the surrounding environment like trees, metal and some other materials, for they can absorb or block the signal, so the distance of data transmission may be influenced as well.
- Please make the speaker fully charged at first time using to make sure it will work well. (When the speaker’s power gets lower, the sound will be not as good as the sound in a normal case).
- Please do not expose the speaker into high-temperature environment.
SPECIFICATIONS
- BLUETOOTH: VS.O
- MOOEL FUNCTION: MUSIC & PHONE CALL MATERIAL: ALUMINUM
- OISTANCE: 10 METERS
- SPEAKER: 036, 40/3W
- FREQUENCY RESPONSE: 20HZ – 20KHZ SNR RATIO: :i.SOde
- PRODUCT SIZE: 49,5 x 36 mm AMPLIFIER: 3W
- BATTERY: 3.7V / 300 mAh
- WORKING TIME: 4H
- NET WEIGHT: 76g
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.