GUESS SP-V60 Wireless Headphones User Manual

GUESS SP-V60 Wireless Headphones

Product Information

The product is an electronic device that complies with part 15 of the FCC Rules. It is designed to be used in temperate climates and should not be exposed to excessive heat. The device can be used by children aged 8 years or older, as well as individuals with reduced physical, sensory, or mental abilities, provided they are supervised and have received adequate instructions on its usage and associated risks. The device generates and uses radio frequency energy and should be used by the provided instructions to avoid harmful interference with radio communications.

Product Usage Instructions

1. Only use this device in temperate climates.
2. This device may be used by children aged 8 years or older and individuals with reduced abilities, provided they are supervised and have received proper instructions on its usage and associated risks. Children should not play with or clean/maintain the device without supervision.
3. Always unplug the device before cleaning it.
4. Clean the device using a soft dry cloth only. Do not use solvents.
5. If the device causes harmful interference to radio or television reception, try the following measures to correct it:
   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and the receiver.
   • Connect the equipment to an outlet on a different circuit than the receiver.
   • Consult the dealer or an experienced radio/TV technician for assistance.
6. Pay attention to the environmental aspects of battery disposal.
7. Avoid exposing the battery (batteries or battery pack) to excessive heat such as sunshine or fire.

For proper disposal of the device, do not throw it away with unsorted municipal waste. Instead, ensure that it is collected separately through local council or retailer-provided collection systems and locations to protect the environment and health.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Product Operation

Bluetooth Pairing

• For the first pairing, press and hold the phone button for 3 seconds to power on the headphones, and then press the button to enter into pairing mode, The light will flash in Blue and Red at the same time.
• Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device.
• Once you have activated Bluetooth on your device, select the earphone ‘GUESS HEADPHONES II’ from the list of available Bluetooth devices.
• When the pairing is successful, a Blue light will flash slowly and your device will show the connected Bluetooth icon.

Note : The pairing function can be different from device to device. (Check the manual of your device)

Power on and Power Off

• Power on: Press and hold the phone button for 3 seconds.
• Power off: Press and hold the phone button for 5 seconds.

Bluetooth music play

1. Open the music player, select a song to play, press the phone button to play music, and then press again to pause music.
2. Play music and a short press key to increase the volume, and press and hold to change the next song.
3. Play music and short press key to decrease the volume, and press and hold 14 to change the previous song.

Bluetooth phone call

1. Press the phone button to answer an incoming call, and press the phone key again to end the call.
2. When the call is coming, press the phone button for 3 seconds to reject the call.
3. Double Press to Re-dial the last call.

Active Voice Assistant

• Triple press  active voice assistant ( Siri / Google Now … )

Connect/ Disconnect :

• Press the button to disconnect and press it again to reconnect with the device.

Transparency Mode :

• Press the button to turn on transparency mode and press it again to turn it off.

Charging:
Fully charge the battery for 2-3 hours before using the earphones for the first time, or when they have been unused for extended periods. When the Bluetooth headphone is connected to a charger (or computer USB port) by charging cable, the headphone will indicate Red light. When the headphone is fully charged, the indicator will stay on green.

Accessories

• 1 x Charging cable
• 1x Aux-in Cable

Specification

• Bluetooth Version: V5.3
• Frequency Range: 20hz-20Khz
• Driver Unit: 40 mm
• Sensitivity: 106±3 dB
• Impedance: 32 ohm±15%
• Input: DC 5V / 500mA
• Playback time: 32 hours
• BatteryCapacity:3.7V/300mAQ
• Charging time: 2 hours
• Transmit distance: 10 meters

Care and Maintenance

This logo means that no naked flames, such as a candle can be placed on or near the device.

The electrical and electronic equipment are part of a separate collection. Do not throw electrical or electronic equipment away with unsorted municipal waste, but ensure that it is collected separately. Collection systems and locations (sorting centers, rubbish dumps) are provided for you by local councils and retailers. By entrusting your end-of-life product to the proper recycling process, you are helping to protect the environment and your health.

1. Use this device in temperate climates only.
2. This device may be used by children aged 8 years or older and by those with reduced physical, sensory, or mental abilities, or those lacking experience foreknowledge, provided they are correctly supervised, or if the instructions related to the use of the device have been adequately given and if the risks involved have been understood. Children must not play with this device. Children should not clean or maintain the device without supervision.
3. Always unplug the device before cleaning it.
4. Clean the device with a soft dry cloth only. Never use solvents.
5. Attention should be drawn to the environmental aspects of battery disposal.
6. The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning : Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction.

Designed in France and made in China.

WARNING : Cancer and Reproductive Harm www.P65Warnings.ca.gov

• FCC ID: 2A7J2-GUBH604
• MODEL: SP-V6

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>