GUESS SP-K1 2 Wireless Headphones User Manual
- June 14, 2024
- GUESS
Table of Contents
EST.1981
WIRELESS HEADPHONES
STUDIO QUALITY SOUND
User Manual
Please read this manual carefully before use
Different models, ifferent graphics, pictures for referenc only
Product Operation :
-
Bluetooth Pairing
Forfst paiing, press and hold phone button fo 2 seconds 1o power on the heacphones to enter into paiing mode, you can hear pramot tne, he lghtwil flash in Blue and Red Sternatvey.
Acivat the Blustooth function on your Bluetooth devie.
(phone or music device. loase refe o the manufacturer’s instructionsfo nstructians on nsbiing Buetoath on your device,
Once you nave actvated Bluetooth on your devic, electthe Sarphone GUESS HEADPHONES I from the s of avalable Bluetooth devices.
When th psirng i successful, Bue ight vl fsch sowy an Your devica il show the connected Bustooth con.
Note: The paiing functon can b diferent rom device dvice. (check the manual of your device) -
Power on and Power Off
Povieron – Press and hold phon button for 2 seconds.
Power o Prss and hld phone button for 2 seconds -
Bluetooth music play
1. Open the music player, select a song to play, press the phone button to play music and then press again to pause music.
2. Play music and press + key to increase the volume, press and hold to change to the next song.
3. Play music and press – key to decrease the volume, press and hold to change to the previous song. -
Bluetooth Phone call : 1. Press the phone button to answer an incoming call, press the phone key to end the call.
2. When the call is coming, press the phone button for 3 seconds to reject the call.
3. Double Press to re-dial last call. -
Activate Voice Assistant :
Triple press to activate voice assistant ( Siri/ Google Now…) -
TF Card Mode: Insert TF card into TF slot, music will play automatically. Press the phone button M to switch between TF Card Mode and Bluetooth Mode.
Specifications:
Bluetooth Version: V5.3
Frequency Range: 20hz-20Khz
Driver Unit: 40 mm
Sensitivity: 109dB +3dB
Impedance: 32 ohm+15%
Battery Capacity: 3.7V / 400 mAh
Charging time: 2 hours
Transmit distance: 10 meter
Charging:
Fully charge the battery for 2 hours before using headphone for the first
time, or when they have been unused for extended periods. When the Bluetooth
headphone is connected with charger (or computer USB port) by charging cable,
the headphon:
will indicate Red light. When the headphone is fully charged, the indicator
will be off.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Designed in France. Made in China.
WARNING : This product car expose you to chemicals including Lead and Bisphenol A(BPA), which are known to the State of California lz to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
FCC ID : 2A7J2-GUBHI
MODEL : SP-K1
Documents / Resources
|
GUESS SP-K1 2 Wireless
Headphones
[pdf] User Manual
SP-K1 2 Wireless Headphones, SP-K1 2, Wireless Headphones, Headphones
---|---