DELL C5519QA Digital Signage Flat Panel User Guide
- May 15, 2024
- Dell
Table of Contents
DELL C5519QA Digital Signage Flat Panel
Specifications
- Model: Dell C5519QA
- Display Size: 55 inches
- Resolution: Full HD
- Connectivity: VGA, DP, HDMI
- Control Interface: Crestron
Product Usage Instructions
Main Window
You can operate the basic controls of the monitor on this screen.
- Power: Turns the power on/off
- Volume: Adjust volume settings and toggle mute on/off
- Sources List: Switch input channel between VGA, DP, HDMI 1, HDMI 2
- Controls: Adjust contrast, brightness, and sharpness settings
Tools Window
This window allows you to configure control system and monitor settings.
- Crestron Control: Configure IP address, IP ID, and port for the control system
- Monitor: Configure monitor name, location, and assigned details
FAQ
-
How do I find the monitor’s IP address?
You can find the monitor’s IP address from the OSD menu by navigating to Others->IP Address. -
How do I access the control interface?
To access the control interface, open a web browser and enter the monitor’s IP address in the address bar. Click on Crestron for the control interface. -
How do I switch input sources?
In the main window, click on the desired input source button (VGA, DP, HDMI 1, HDMI 2) to switch between input channels.
Dell C5519QA Dell Display Control User’s Guide
Copyright © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
- 2022 – 11
- Rev. A00
Dell Display Control
Find the monitor’s IP address from OSD menu (Others->IP Address).
Open a web browser and enter the monitor’s IP address (e.g. http://10.0.50.100) in the address bar. The Home page opens and click Crestron for the control interface.
The Main window as shown below is displayed.
You can open a window by clicking the corresponding tab at the top right of the window.
| Tab | Description |
|---|---|
| Tools | Opens Tools window. |
| Info | Opens Info window. |
| Contact IT Help | Opens Help Desk window. |
Main window
You can operate the basic controls of the monitor on this screen.
| Button | Description |
|---|---|
| Power | Turns the power on/off |
| Vol -/ Vol + | Adjusts the volume settings |
| Mute | Toggles Mute on/off |
Sources List
You can click a button to switch the input channel. The cursor will move
according to the currently selected input port.
| Button | Description |
|---|---|
| VGA | Selects input from VGA port. |
| DP | Selects input from DP port. |
| HDMI 1 | Selects input from HDMI 1 port. |
| HDMI 2 | Selects input from HDMI 2 port. |
Click a button and operate as follows. To show the hidden buttons, click the icons if applicable at the left and right ends.
| Button | Description |
|---|---|
| Contrast | Adjusts the contrast setting. |
| Brightness | Adjusts the brightness setting. |
| Sharpness | Adjusts the sharpness setting. |
Click the button and operate in the same way as the remote control.
| Button | Description |
|---|---|
| Menu | Assigned the same operation as MENU button. |
| Enter | Assigned the same operation as ENTER button. |
| Exit Menu | Assigned the same operation as EXIT MENU button. |
| Assigned the same operation as button. | |
| Assigned the same operation as button. | |
| Assigned the same operation as button. | |
| Assigned the same operation as button. |
Tools Window
Configures the settings between the monitor and Crestron® control system. Click the [Exit] button to return to the Main window.
- Crestron Control
Configures the settings of Crestron® control system devices.
| Item | Description |
|---|---|
| IP Address | Configures the IP address of the control system. |
| IP ID | Configures the IP ID of the control system. |
| Port | Specifies the port number used for communication by the control system. |
To apply the settings, click the [Send] button.
Monitor
Configures the monitor settings.
| Item | Description |
|---|---|
| Monitor Name |
- Configures the name of the monitor. The length of the Monitor
- Name can be up to 22 alphanumeric characters.
Location|
- Configures the location name of the monitor. You can specify a
- Location name up to 22 alphanumeric characters.
Assigned To|
- Configures the user name for the monitor. You can specify a
- user name up to 22 alphanumeric characters.
The usable symbols are space and the following: !”#$%&’()*+,-./:;<=>?@[\]^_`{|}~ To apply the settings, click the [Send] button.
Network Setting
Configures the network settings of the monitor.
| Item | Description |
|---|---|
| DHCP | Enables DHCP. |
| IP Address | Configures the IP address when DHCP is disabled. |
| Subnet Mask | Configures the subnet mask when DHCP is disabled. |
| Default Gateway | Configures the default gateway when DHCP is disabled. |
| DNS Server | Configures the DNS server address. |
To apply the settings, click the [Send] button.
User Password
Configures the User Password. To prompt the entry of User Password before
starting Display control, select the checkbox.
| Item | Description |
|---|---|
| New Password | Configures the password. You can specify a password up to 22 |
alphanumeric characters. The usable symbols are space and the following:
!”#$%&’()*+,-./:;<=>?@[\]^_`{|}~
Confirm| Re-enter the above password for verification. If the password is
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.
Admin Password
Configures the Admin Password. To prompt the entry of Admin Password before
displaying the Tools window, select the checkbox.
| Item | Description |
|---|---|
| New Password | Configures the password. You can specify a password up to 22 |
alphanumeric characters. The usable symbols are space and the following:
!”#$%&’()*+,-./:;<=>?@[\]^_`{|}~
Confirm| Re-enter the above password for verification. If the password is
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.
Info window
Displays the settings and status of the monitor. Click the [Exit] button to
return to the Main window.
Monitor Information
| Item | Description |
|---|---|
| Model Name | Displays the model name of the monitor. |
| Location | Displays the the location name of the monitor. |
| Firmware Version | Displays the version of the monitor firmware. |
| MAC address | Displays the wired LAN MAC address of the monitor. |
| Monitor Name | Displays the user name of the monitor. |
Monitor Status
| Item | Description |
|---|---|
| Power Status | Displays the current power status. |
| Source | Displays the current input signal source. |
| Image | Displays the current picture mode setting. |
NOTE: Monitor Name, Location and the user name for Assigned To may appear truncated if they are too long.
Help Desk window
Sends/receives messages to/from the administrator for Crestron RoomView® Express.
| Button | Description |
|---|---|
| Send | Sends a message. |
Emergency Alert
When the administrator for Crestron RoomView® Express sends out an alert message, it will be displayed on the screen.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>