EKVIP 021652 Glass Ball Instruction Manual
- June 3, 2024
- EKVIP
Table of Contents
EKVIP 021652 Glass Ball
SAFETY INSTRUCTIONS
- Do not connect the product to the mains power supply while the product is still in the pack.
- Only intended to be used indoors.
- Check that no light sources are damaged.
- Do not connect two or more string lights together.
- No part of the product can be replaced or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or abrasive objects during assembly.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the string of lights.
- This is not a toy. Exercise care if the product is used near children.
- Unplug the transformer from the mains power supply when the product is not in use.
- This string of lights must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING! The product may only be used if all seals are fitted correctly.
SYMBOLS
- Read the instructions.
- Class III.
- Approved as per applicable directives.
- Recycle a discarded product in accordance with applicable regulations.
TECHNICAL DATA
- Input voltage, transformer 230 V ~ 50 Hz
- Output voltage, transformer 4.5 V DC
- Output, transformer 0.79 W
- No. of LEDs 20 pcs.
- Protection rating IP20
- Dimensions Ø 150 mm
USE
- Remove the product from the packaging.
- Connect the product to the transformer.
- Plug the plug into the mains power supply.
- Press the power switch to turn on the light sources.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>