milwaukee M12 Digital Torque Wrench User Manual
- June 5, 2024
- Milwaukee
Table of Contents
DIGITAL TORQUE WRENCH
QUICK START GUIDE
HOW TO USE
-
Set Target Torque
-
Pull trigger to max RPM
-
Tool will automatically stop prior to
Target Torque to prevent over-torquing -
Finish by hand to reach Target Torque
-
Press to save the record
ADJUSTING TARGET TORQUE
Target Torque is the required torque value for the fastener installed. Adjust the target torque to meet the desired torque specifications.
Navigate to Target Torque and press OK
Adjust the Target Torque using UP/DOWN
Press OK when finished
ADJUSTING TORQUE RANGE
Torque Range indicates the acceptable range of values for a successful
installation event.
Adjust the Torque Range to meet the recommended torque specifications.
Navigate to Range and press OK
Adjust the Torque Range using UP/DOWN
Navigate to Done and press OK when finished
ADJUSTING RUNDOWN TORQUE
Rundown Torque changes the tool’s power output.
Adjust the Rundown Torque to help prevent over-torquing of the fastener.
Navigate to top left corner and press OK to go to Menu
Navigate to Rundown Torque in Menu and press OK
Use UP/DOWN to select the tool’s Rundown Torque and press OK
SETTING UNIT OF MEASURE
Adjust the unit of measure to comply with the required torque specifications of the fastener.
Navigate to Settings in Menu and press OK
Navigate to Units in Settings and press OK
Select desired Unit and press OK
Nothing but HEAVY DUTY™
www.milwaukeetool.asia