milwaukee M12 CPD CPD Hammer Drill User Manual
- June 5, 2024
- Milwaukee
Table of Contents
milwaukee M12 CPD CPD Hammer Drill
INSTALLATION INSTRUCTIONS
Remove the battery pack before starting any work on the machine
Remove the battery pack before starting any work on the machine
START/STOP
LOCK/UNLOCK
DRILLING
TECHNICAL DATA
- Drilling capacity in steel 13 mm
- Drilling capacity in wood 25 mm
- Drilling capacity in brick and tile 13 mm
- Wood screws (without pre-drilling) 8mm
- No-load speed 1st gear 0-450 min-1
- No-load speed 2nd gear 0-1700 min-1
- Percussion rate 1st gear 0-6750 min-1
- Percussion rate 2nd gear 0-25500 min-1
- Torque max (Li-Ion battery 2.0 Ah)* 37 Nm
- Torque max (Li-Ion battery 4.0 Ah)* 44 Nm
- Battery voltage 12V
- Drill chuck range 1.5-13 mm
- Weight according EPTA-Procedure 01/2003 1.34 kg
Noise/vibration information
- Sound pressure level (K = 3 dB(A)) 91 dB(A)
- Sound power level (K = 3 dB(A)) 102 dB(A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to
EN 60745
- Percussion drilling into concrete 30.8 m/s2
- Uncertainty K 4.06 m/s2
- Drilling into metal 1.27 m/s2
- Uncertainty K 1.5 m/s2
- Screw-driving 1.27 m/s2
- Uncertainty K 1.5 m/s2
WARNING!
The vibration emission level given in this information sheet has been measured
in accordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration
emission may differ. This may signify cantly increasethe exposure level over
the total working period. An estimation of the level of exposure to vibration
should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may signif cantly reduce
the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
WARNING!
Read all safety warnings and all instructions, including those given in the
accompanying brochure. Failure to follow the warnings and instructions may
result in electric shock, f re and/
or serious injur. Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS FOR ROTARY DRILLS
- Wear ear protectors. Exposure to noise can cause hearing loss.
- Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
- Sawdust and splinters must not be removed while the machine is running.
- When working in walls, ceiling, or f oor, take care to avoid electric cables and gas or waterpipes.
- Remove the battery pack before starting any work on the machine.
- Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offer to retrieve old batteries to protect our environment.
- Do not store the battery pack together with metal objects (short circuit risk).
- Use only System C 12 chargers for charging System C 12 battery packs. Do not use battery packs from other systems.
- Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
SPECIFIED CONDITIONS OF USE
The electronic battery percussion drill/screwdriver may be used for drilling, percussion drilling, as well as screwdriving for independent use away from mains supply. Do not use this product in any other way as stated for normal use.
BATTERIES
- New battery packs reach full loading capacity after 4 – 5 chargings and dischargings. Battery packs which have not been used for some time should be recharged before use.
- Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
- The contacts of chargers and battery packs must be kept clean.
- For an optimum life-time, the battery packs have to be fully charged, after used.
- To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
- For battery pack storage longer than 30 days:
- Store the battery pack where the temperature is below 27°Cm and away from moisture.
- Store the battery packs in a 30% – 50% charged condition
- Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling and short circuit situations that cause high current draw, the tool will vibrate for about 5 seconds, the fuel gauge will f ash,and then thetool will turn OFF. To reset, release the trigger. Under extreme circumstances, the internal temperature of the battery pack could raise too much. If this happens, the fuel gauge will f ash until the battery pack cooled down. After the lights go off, the work may continue
MAINTENANCE
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents.
SYMBOLS
- Please read the instructions carefully before starting the machine.
- Remove the battery pack before starting any work on the machine.
- Do not dispose of electric tools together with household waste material! In observance of European Directive 2002/96/EC on waste, electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>